SmallRig RM75 RGBWW Magnetic Smart LED Video Light 3290 Instruction Manual

RM75
RGEWW VIDEO LIGHT

Product Manual

Foreword
Thank you for purchasing the SmallRig RM75 RGBWW Video Light

Instructions

• Please read this product manual carefully.
• Keep this product manual and always include it when passing the product onto a third party.
• Heed all warnings and follow all instructions in this user manual.
• Never remove the non-detachable lithium battery without permission.
• When the battery is not in use for a long time, please charge and discharge the battery every 6months, and provide it with about 60% of the electric quantity to prolong its useful life.
• Since there are some hazardous substances in the battery, please do not discard it. Instead, dispose of the product that is damaged or will never be used according to it the waste management measures.

WARNING: Do not disassemble the product or change its battery. If you have any questions, please contact the seller to apply for after-sales service.
Intended Use Intended use of the SmallRig RM75 includes:

• The user has read the instructions of this manual.
• The user is using the products within the operating conditions and limitations described in this product manual.
• Improper use means using products other than as described in these instructions or under operating conditions that differ from those described herein.

Item Check List

The package includes the following items:
Product Details

1. OLED Screen
2. Function Control Wheel
3. Power Switch
4. USB Type-C Charging Port
5. LED Beads
6. 1/4%20 Screw Mount

Operation Instructions

1. Charging
Type-C charging
As the light is charging, the on-screen battery level indicator will animate to show the battery’s status. After the battery is fully charged, the battery level indicator will be displayed as full.

• Supports 5V/2A charging via power brick or power bank.
• Supports quick charging via USB-C PD protocol.
• Charging is slow when the light is powered on. Turn the light off for optimal charging.
• The on-screen battery indicator will flash when the battery level is too low. Please charge the light in time.

Power ON/OFF

Adjust the position of the power switch to turn the light on or off.

3. CCT Mode
Press and hold the control wheel for 2 seconds to access the system menu. Rotate the control wheel to select CCT and press the wheel to enter CCT mode. In CCT mode, rotate the control wheel to adjust the color temperature between 2500K-8500K. Short press’ the wheel to select intensity(INT) control, and turn the wheel to adjust the brightness level from 0-100%.

Access more fine control via the SmalIGOGO mobile application.
4. HSI Mode
Press and hold the control wheel for 2 seconds to access the system menu. Rotate the control wheel to select HSI and press the wheel to enter HSI mode. In HSI Mode; short press’ the control wheel to toggle between HUE/SAT(saturation)/INT (intensity) controls. When controlling HUE rotate the control wheel to adjust the hue color from 0-360°. When controlling saturation (SAT), turn the control wheel to adjust the color saturation between 0-100%. When controlling intensity (INT), turn the wheel to adjust the brightness level between 0-100%.

5. FX Mode
Press and hold the control wheel for 2 seconds to access the system menu. Rotate the control wheel to select FX and press the wheel to enter FX mode. In FX mode, rotate the control wheel to toggle between different lighting FX presets RGB, Paparazzi,

Party, Lightning, Fault bulb, TV, Fire, Random, Fireworks, Police car, Firetruck, Ambu-lance, Welding, SOS, Pulsing. Once you have selected your desired lighting effect,’ short press’ the control wheel to access intensity(INT) control. Rotate the control wheel to adjust the brightness of the lighting effect from 0-100%.

6. Bluetooth Mode
Press and hold the control wheel for 2 seconds to access the system menu. Rotate the control wheel to select BT and press the wheel to the Bluetooth Reset menu. Rotate the control wheel to select ‘YES’ and short press the wheel to reset the device’s Bluetooth pairing, (the pop-up window displays the current reset progress. The reset process completes within 5 seconds.) or select ‘NO’ to return to the system menu.

7. Attaching the Silicone Diffuser

8. Using the Magnets
 Don’t attach this device or the magnets to any surface with a temperature above 80°C.

Please pay attention to the placement of your fingers to prevent pinching when the lights are spliced.

Don’t store the lights with bank cards, watches, or other precious objects in case of damage.
Using the SmallGoGo APP
You can download the SmallGoGo app from the iOS App Store or Google Play Store for enhancing the functionality of the light. Please visit www.smallrig.com help for more details regarding how to use the app to control your SmallPig lights.

|
---|---
https://www.smallgogo.com/OperationManual/operationmanualen.html| https://www.smallgogo.com

specification

Power
Color Temperature
Illuminance
CRI
TLCI
DUV
Battery Type
Battery Operating Life
Weight
Dimension| 2500 k to 8500 k
1 300Iux ®0.3m; 500Iux@0.5m; 1 20Iux@l m
96
96
±0.002
Lithium-Polymer Battery (3.7V 4000mAh)
3h @100% brightness; 16h @1% brightness
185g99.67*18mm
---|---

Detailed product manual for SmallRig RM75 can be found on https://www.smallrig.com/
Service Warranty
Please keep your original purchase receipt and warranty card, including your purchase date, product serial number, etc., which are required for the warranty service.
After-sale warranty terms
1. 7 Days DOA Return Policy: Within 7 Days from the package receipt date, return or replacement can be done if the item received is malfunctioning or physically damaged (non-artificial damage), return shipping cost will be on SmallRig’s charge.
2. 30 Days Free-Reason Return Policy. Within 30 Days from the package receipt date, return or replacement can be done if the item is in good condition (without any malfunction or physical damage ). The return shipping cost will be on the customer’s charge.
3. 1-Year Warranty: Within 1-year from the package receipt date, the defective product (non-artificial damage) is eligible to get repair/replacement for free. The defective product (artificial damage) will be charged for repairing/replacement based on the damage level.
This warranty does not cover
1. The defect caused by users’ violation of the “Warnings” and “Installation Steps”.
2. The product identification or SN label is removed or defaced in any way.
3. The product is serviced or repaired by anyone other than our company or the service agency authorized by our company.
Guarantee Card

Serial No…………………..
Item Name………………………
Purchase Date……………………
User Name…………………
Mobile…………………..
Address…………………….
Receipt………………………

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
ID Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>