Mirabella genio E96F Full HD Wi-Fi Indoor Camera User Guide
- June 6, 2024
- Mirabella genio
Table of Contents
Quick Start Guide
FULL HD Wi-Fi INDOOR CAMERA
Model: E96F
KEYCODE: 42988267
Welcome, Thank you for choosing our smart camera, getting started is
easy.
What’s included
| | Power Adapter|
---|---|---|---
Security camera| Reset Needle| double-sided Tape
Product Details
Connection Preparation
It is important that your phone is connected to 2.4Ghz Wi-Fi and not to the
5GHz network.
To verify your mobile device is set to a 2.4Ghz Wi-Fi network, navigate to the
Settings menu and click on Wi-Fi. In this menu, you will see all the
detectable networks in your area. Locate the SSID (the name of your network),
and ensure that the Wi-Fi SSID does not end with a 5G / 5GHz.
Check you have a strong WI-FI signal (at least two bars) in the location where
the smart camera is to be installed.
If you don’t have at least two bars signal on your phone, then you may need to
reconsider relocating the camera to a different location or obtain a Wi-Fi
extender to boost the WI-FI signal strength.
Install the APP and register Account
For the best experience, download the “Mirabella Genio” APP to your smartphone from the App Store or Google Play, or you can also scan the QR code below, the Genio APP icon will be displayed after it has been installed successfully.
http://www.mirabellagenio.com.au/smartapp
Insert the Micro SD card (Micro SD card not included)
The camera is able to work without a Micro SD card but it will not able to
record any footage without a Micro SD card.
Micro SD card slot is located on the side of the camera, carefully insert the
Micro SD card in the correct direction. Do not force it inside.
Micro SD card size needs to be greater than 8GB, Supports up to Max of 128Gb.
Pairing the camera using Mirabella Genio App
- Connect the power to the camera using the supplied DC 5V 1A power adapter then switch it on.
- Wait for 30-40 seconds, the indicator light will start blinking rapidly in RED (2 blinks per second) – The camera is now ready to pair.
- Launch the Mirabella Genio APP, then tap on “+” symbol, then choose
Security & Sensor, and select your camera from the menu.
Follow the APP’s instructions carefully to complete the network pairing
process.
Video instructions of the full pairing process are available at
www.mirabellagenio.com.au If after
scanning the QR code the indicator light changes from blinking Red to blinking
Blue but fails to become a solid Blue, or if you have received a time out
and/or device not found error, this is an indication of a communication error
with the router, Please ensure
- That you have manually disabled the 5Ghz WIFI signal on the router setting.
- Make sure you enter the correct 2.4Ghz Wi-Fi name and password
If the led indicator light is not red and blinking rapidly when turned on (2
blinks per second), power off the camera, wait for 10 sec, power on and hold
the reset button until the light starts to blink red rapidly and repeat the
pairing process again.
Camera usage Tips (interface may change with software update) Tap on the
pencil icon to access the camera’s settings page
| To take a snapshot of the screen and save it to phone’s camera roll
Tap to speak to the camera
Record live footage into your phone’s internal storage
Access to the footage recorded on the Micro SD card
To turn the motion detection alarm on / off
---|---
To turn sound on/ off
To change video quality, high definition or standard definition
To access to camera’s settings page
To switch to full-screen view mode
: Wi-Fi signal, if the signal is less than 60% you should consider changing
the location or boost the Wi-Fi Signal using a Wi-Fi extender
| Share Device: if you wish to share or remove sharing this camera with
another genio APP user
Device information: details information for this camera, owner
information, Virtual ID, IP address, etc
Use Echo: instruction on how to use with Amazon Alexa
Basic Function Settings: Please ensure IR Night Vision is on Auto, and
Talk Mode is on two-way talk
Motion Detection: On/Off and detection sensitivity level setting
Memory Card Settings: This will only appear when an 8GB-128GB Micro SD
card is inserted
Firmware information: When new firmware is released for this camera you
will see this notification icon.
Remove Device: Remove the device from the current account so you can
repair it again or pair under a different account/router
---|---
|
**| SD Card Recording: This option must be turned on if you want to
record footage onto an SD card and view it in playback mode
Event recording: Only records if it detects movement, motion detection
option must be on at the same time for it to work
Non-stop Recording: The camera will start to record 24/7, when the SD
card is full, the new footage will automatically overwrite the old footage
without end-user action
Format Memory card:** Delete all content on the SD card and format the SD
card into FAT32 format
---|---
We recommend using Scandisk, Verbatim, Kingston, Samsung – Class 10 high-speed micro SD for best performance, When using non-stop recording a 32GB card can record up to 6 days of footage. Event recording can record up to 4 weeks of footage.
Remember the performance of a Wi-Fi camera relies heavily on the performance
of your router, before considering buying a new router or Wi-Fi extender.
If you are using Telstra NBN or a dual-band router, you must disable the 5GHz
Wi-Fi in order to make a successful connection and for best overall
performance, as MOST smart products in Australia only work on the 2.4Ghz
signal.
FAQ:
How to connect the camera to another router/genio account?
Go to the camera’ settings page, look for “remove device” Remove it and reset
the camera, and pair it again through the APP.
Poor performance, take a long time to load the live footage?
Please check the Wi-Fi signal, if it is less than 60%, you will need to
consider changing the camera location or purchasing a Wi-Fi extender to boost
the signal.
The camera goes offline and doesn’t reconnect back after a power failure?
Go to the camera’ settings page, look for “remove device” Remove it and reset
the camera, and pair it again through the APP.
Receive the Cannot find Device error?
Ensure the camera is in a location with strong Wi-Fi signal coverage
Manually disable the 5Ghz Wi-Fi signal on the router setting
Ensure that the 2.4Ghz Wi-Fi signal is on.
Ensure the indicator light is blinking RED rapidly as per the APP screen (2
blinks per second)
Please check you have entered the correct 2.4Ghz Wi-Fi SSID and password
I am using Telstra NBN, I disabled the 5Ghz and I still cannot get it to
pair?
Please follow the Guest Network paring instructions on
https://mirabellagenio.net.au/faqs
If you have done all of the above, ensuring that the 5Ghz is disabled and the
light changed from blinking red to blinking blue, but failed to become a solid
blue, then your modem could be incompatible with a smart device.
All trademarks are used for reference purposes only. Made in China
ANKO, HOME&CO, AND AUDIOSONIC® ARE TRADEMARKS OF KMART AUSTRALIA LIMITED.
MIRABELLA INTERNATIONAL PTY LTD
1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043
TOLL-FREE: 1800 636 528,
www.mirabellagenio.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>