Mirabella genio I003028 7W LED Wi-Fi Smart Tube Light Instruction Manual
- June 6, 2024
- Mirabella genio
Table of Contents
I003028 7W LED Genio Wi-Fi Smart Tube Light
TO ENSURE THE SAFE AND SATISFACTORY OPERATION OF THIS SET PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE REFERENCE
SAFETY INFORMATION:
- Remove set from the packaging before connecting to the power supply.
- Use only with the adaptor supplied
- Ensure that the cable is completely uncoiled whilst the set is in use.
- LED bulbs are nonreplaceable.
WI-FI pairing information
- Download the “Mirabella Genio” App from the App Store or Google Play, and register an account
- Connect your mobile phone to a 2.4Ghz Wi-Fi network (tube light doesn’t support 5Ghz Wi-Fi)
- Connect the adaptor to the tube light and switch the power on Tube light should start to blink
- Open and login to Mirabella genio APP, follow the in-app prompts to connect tube light to your Genio APP
If the tube light doesn’t start to blink when first powered on, then power off, then power on, press and hold the on/off button on the top of tube light, until it starts to blink, then pair it again
Should the tube light or adaptor get damaged, do not attempt to repair
TO BE REPAIRED BY AN AUTHORIZED PERSON ONLY
THIS IS AN AUSTRALIAN STANDARDS REQUIREMENT IN THE INTEREST OF YOUR SAFETY
Mirabella International Pty Ltd
Toll-Free: 1800 636 528
www.mirabellagenio.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>