CL B09MCRY8TX 2.4 Inch Digital Camera for Kids Owner’s Manual

CHILDREN’S INSTANT
CAMERA MANUAL

Please read the instruction carefully before use the camera and keep it properly for future use.

Button Instruction

Button Function Description

1. Photo/Video Modes Switch: Click to switch take photos or videos.
2. Delete: Delete the photos or videos.
3. Return: Return to Function Choose Modes.
4. Camera On/Off & Main Menu: Long press 3-5 seconds and will tam off the Can also serve as the return key.
5. Shutter Button & &eat”: Click to take a photo or video. Delete the photos for the confirmation key.
6. Up & Zoom In: Turn over the directory and photos and choose big heed paste. Can also adjust the zoom to 40.
7. Left & Photo Sticker Modes: Bring up the big heed paste or filter.
8. Right & Photo Album: Bring up the photos or videos for review or pant. & Down & Zoom Out Turn over the directory and photos and choose big head paste. Can also adjust the zoom retun from 4X to normal.
9. Print On/Off Switch: On will print automatically once take a photo. Off will just take a photo and store to Album for choose to print or not.
10. LCD Monitor: 2.4 Inch IPS Screen. Safe material to kids’ eyes. Print Paper Door Install the print paper for print.
11. Memory Card Socket Memory capacity can be expanded freely. Maximum support 32GB Card(Included).

Installation and replacement of print paper

Operation illustrate

1. (4. Camera On/Off switch, Main menu): Long press this button for 3 seconds to turn en and off the camera, and short press to return to the main menu.
2. (1. Photo /Video mode switch): Select this button to switch the corresponding function and then press (5.5hutter button, Verify) to operate.
3. (10. Print On/Off switch): To print the photo, please turn on this print switch first
4. (3. Lens of the camera): It can be manually rotated to switch between front and rear.

TF card installation and notes

1. Insert the TF card into the card slot in the correct direction until the TF card is fixed in the card slot. When removing the TF card, press down the TF card gently and wait for the TF card to pop out, then you can remove it, (TF card must use a C10 or higher high-speed card. Please do not insert or remove the TF card while the machine is working to avoid damage to the machine and memory card)
2. Please pay attention to the direction of TF card insertion. If it is inserted upside down, this may damage the machine, TF card and card slot.
3. After you insert the TF card into the machine, the machine will set the TF card as the default storage device. The data in the original TF card may not be readable. Please make a backup of the data first.
4. 9 the TF card is not compatible with the machine, please use the format option in the internal memory menu to format the TF card or ry another TF card.

Operating parameters

1. Operating voltage: 7.4V.
2. Operating current: 150mA.
3. Printing operating current: 2A.
4. Charging current: 2A.
5. Charging voltage: 5V.

Charging instructions

1. During charging, the indicator light is always on and the indicator light is off when fully charged.
2. When input over-voltage, output under-voltage and over-voltage, output short-circuit or chip over-temperature, and an indication of battery connection, etc., the indicator flashes at a frequency of 1.3HZ.
3. It takes 70-140 minutes to fully charge the battery.

Battery use and safety precautions

This machine uses a built-in 7.4V / 1200mAh polymer battery. It cannot be removed or replaced. If it is damaged, please contact the seller for repair. The battery must be recharged under adult supervision. When the battery is charging, the toy switch should be turned off. The power terminals must not be shorted. Do not connect more than the recommended number or higher than the recommended voltage (recommended adapter specifications: DC5V__2000mA). During the use of the toy, the wire plug housing and other parts should be regularly inspected for damage. If damage is found, stop using it until it is repaired. When the toy is not used for a long time, please fully charge the battery before turning off the power switch.

Camera Specification

Maintenace method

The electrical components of this product mustn’t be exposed to water or placed in a humid environment. When cleaning, wipe the surface stains with a dry cloth. Do not allow cleaning, wipe the surface stains with a dry cloth. Do not allow children to play with disintegrated, broken, deformed toys to avoid accidents such as accidental swallowing and suffocation.
caveat:

1. This product contains small parts, there is a danger of suffocation, not suitable for children under 3 years old.
2. Do not immerse the battery in water, pay attention to moisture and explosion.
3. Do not get close to the fire source when playing.
4. Do not disassemble or modify the battery without
5. This product needs to be used under direct adult
6. Toys are not allowed for children under 3 years of age
7. Toys can only use the recommended transformer.
8. Transformers are net toys.
9. There is important information en the package, which must be retained.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>