GPO ENZ1001-BLK Lamp with Wireless Charger and Pen Holder User Manual

: June 6, 2024
: GPO

Table of Contents

Standard Accessories
Instructions
Attention
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lamp w/wireless charger and pen holder
User Manual

Standard Accessories

Wireless charger with Lamp & pen holder x 1pc
USB A to USB C charging cable x 1pc
User manual x 1pc

Instructions

Connect the wireless charger with the AC source by power adapter, wireless charger turn on, the indicator shows green color in 3 seconds and goes into blue color in 15 seconds for standby mode. Flexible gooseneck is easy to adjustable.
When the charger of QC2.0/3.0 is connected to the master seat and put into the device in use, the output 10W quick charging can be performed, and the 5V2A charger can be used for ordinary charging for the wireless charger with lamp and pen holder.
Touch lamp switch, the lamp will light on, the lamp has 3 types of lighting mode: strong cold light, strong warm light, dim warm light, then touch one more time to turn off it.
When there is a metal foreign body on the surface of the coil, stop the external output, remove the foreign body can be restored to normal.

Attention

Please keep the charger away from water or other liquid.
If you need to lean the charger, please make sure it is powered off.
Using environment: Working temperature: -0～45℃, Storage humidity: 45~85%RH

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.