GPO PR200 Amplifier Speaker System User Manual

: June 4, 2024
: GPO

PR200 Amplifier Speaker System
User Manual GPO PR200 Amplifier Speaker System

Important safety instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Refer all servicing to qualified service personnel.
Do not expose the unit to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on it.
Heat – The appliance should be put away from heat sources such as radiators, heat, registers, stoves, or other appliances (including amplifiers) that produce heat.
Class, I appliances must be connected to the main socket outlet with a protective-earth connection.
The mains plug connects the device and should remain operable during use.
To disconnect the unit from the mains, the plug should be fully disconnected from the mains socket outlet. The main plug should not be obstructed and should be easily accessible during use.
When a power indicator light is on, it indicates the unit is connected to the main supply. When the light is off, it indicates the unit is fully disconnected from the main supply.
Damage Requiring Service: The appliance should be serviced by qualified service personnel when:
– The power supply cord or the plug has been damaged
– Objects have been exposed to rain.
– The appliance does not appear to operate normally or exhibits a marked change in performance.
– The appliance has been dropped, or the enclosure damaged.

What’s in the box
Check and identify the contents of your package:

Head Unit PR200 (Amplifier)
2 speakers
Remote control 1 pc
Instructions for use

MAIN UNIT PR200 (AMPLIFIER) & SPEAKERS

LCD Screen
IR Sensor
Right VU meter
Left VU meter
Power ON/OFF & Function select button**
Headphone Jack
Aux in Jack (2)
USB connection
Mode **
record
Bass
Treble
CD player
Speaker Balance (L, R)
Skip back (CD/ USB) & FM Tune
SKIP forward(CD/ USB) & FM Tune
STOP button / MENU / INFO
Play and Pause / BT Pair (Bluetooth connection)
CD tray open/close
Volume Control (Min / Max)
FM Antenna
Line in connection (R / L )turntable connection
Aux In (1)
speaker connection (R / L )
power cable

** Function Select key (key 5):
Press this button to turn on the PR-200
Turn the key to select functions: Phono / AUX In1 / Aux In 2 / DAB / FM Radio / CD / USB / BT **
Mode (key 9): Repeat 1 number, Repeat Folder, Repeat All Songs, Random CD / USB GPO PR200 Amplifier Speaker System - Fig 1

REMOTE CONTROL

Remove the battery cover from the back of the remote control.
Insert 2 AAA batteries. (Not included) Check the polarity (+ and – symbols on the battery) and follow the instructions on the diagram in the battery compartment
NOTE: Please make sure you properly dispose of batteries (see your local regulations).
Replace the battery cover
The user is advised to use Remote Control to operate most of the functions of the main unit (amplifier)

BATTERY REPLACEMENT

If the battery is low, the distance with which the remote is operating will be greatly reduced, and you will need to replace the battery.

To use the remote control, point it to the IR sensor (10) and press
the button gently but firmly. Since the remote control range is reduced when the unit is used at an angle, try to direct it to the remote sensor
Do not expose the distance sensor to strong light (direct sunshine or artificial light) and make sure there are no obstacles between the remote sensor and the remote control

GPO PR200 Amplifier Speaker System - Fig 2

IR SENSOR
POWER ON/OFF
MODE- REPEAT(REPEAT ONE,
REPEAT ALL, REPEAT RANDOM)
FUNCTION PHONO/ BLUETOOTH / AUX IN / CD / USB / FM TUNER
TS
DELETE
MENU/ INFO (FOR DAB/FM RADIO)
REC RECORD
PLAY/PAUSE / BT PAIR / ENTER
SKIP THE BACK BUTTON
STOP
VOLUME –
NUMERIC KEYS (1–10, -10/+10)
CD OPEN / CLOSE
SET TIME / MEMORY (FM,CD, USB)
MUTE
PRESET – / FOLDER
PRESET + / FOLDER +
EQ (EQUALIZER: ROCK / POP/ CLASSIC / JAZZ/ OFF)
SKIP FORWARD
VOLUME +
BATTERY DOOR

POWER SUPPLY

This unit is designed to operate on a normal AC 100V ~ 240V, 50/60 Hz household power supply. Do not attempt to operate the system using other power sources. This may result in damage to the unit and void your warranty.

DAB MODE

Getting started

Press the Power button (2) by the remote control to turn the unit on.
Press Function (4) to enter the DAB /FM Tuner by remote control.
Fully Extend the antenna on the back of your radio to get a maximum signal.
It will automatically scan for DAB radio stations. LCD Display will show the scanning progress and the number of stations found. It may take 2-3 minutes to finish, after all stations are stored, the radio will select the first station & adjust the volume to play.
If the DAB signal or desired station is not found, the reception signal may be poor. Please relocate your radio & tune the radio again.
Press or select the station you would like to listen to.
Preset Enter (9) to confirm what you choose to play
Press Memory (15) for 3 seconds to store the station function & Enter (9) to confirm the Memory stored
Press Memory (15) again to show back the stations you stored,
Press or choose & Enter (9) to confirm to play.
Press MENU/ INFO (7) for 3 seconds to enter the menu :
A Full scan; B. manual tune; C Prune; D. System: Language, factory reset, SW version, by pressing ^a or ^a to choose the function and Enter (9) to confirm
9A. Full scan: The unit will automatically scan for all DAB radio stations. Go to Memory & or o select the station you would like to listen.
9B. Manual Tune: Press to scan, then user can get the frequency.
9C. Prune: To trim DAB stations, you can remove the unreceived stations on the DAB station lists. Press the Menu button, use skip or to choose the Prune function, and Select the deleted station. It will show Yes or No, Press Enter (9) to confirm the station deleted. The inactive or unreceived station will be removed from the list and replaced by a new station.
9D. System
Choose the below functions by using or pressing Enter (9) to confirm.
– Language: English, Deutsch, Italian & French.
– Factory reset – All presets will be erased
– DAB Version: You can get the software version from this: SW version
Press MENU/INFO again to withdraw the function
The radio will store up to 20 DAB_ stations.
Note: If no DBA station has been stored, the radio will revert to the former selected radio station.
12. The Signal Strength
a. Signal strength
The LCD display will show the actual signal strength that the user is now receiving. When stations with the minimum signal level, it may not provide a steady stream of audio. The more solid bars will indicate a stronger signal of receiving power.
a. Dynamic label segment (DLS). This is scrolling text information supplied by the broadcaster. The information could be the name of an artist or music title. DJ’s name, contact details for the radio station, etc.
b. Multiplex Name – Displays the broadcasting area and collection of radio stations on the frequency e.g. BBC Football DAB, Station1
c. Channel & Frequency e.g. 14A 236 .578 MHz.
d. Signal error – If an error signal occurs or the signal is weak, Try to relocate the radio & tune the channel again.

OPERATING THE RADIO (FM Mode)

A) Auto scan

Press the Power button (2) by the remote control to turn the unit on.
Press Function (4) to FM Tuner by remote control. Press or switch from DAB to FM.
Press Enter (9) by remote control to start the AUTO SCAN function and automatically search for radio stations for 3 minutes. The screen displays the digits and station numbers. Once complete, the unit will store a maximum of 20 preset stations.
Press the Memory and or by Remote Control Unit to search for the desired station, Then press Enter (9) to confirm to play

B) Tuning

Turn the Power on (2)
Press Function (4) to FM Tuner by remote control.
Press the SKIP for 3 seconds to automatically tune in to the next station.
Adjust the Volume to the desired level.
Turn the Power off to turn the radio off.

C) Stations in memory positions P01 to P20

Press Function (4) to FM Tuner by remote control.
Press the SKIP to automatically tune in to the next station.
Press MEMORY (15) by Remote Control Unit. The current position of the number will flash in the display, e.g. ‘P01, P02… P20’.
Press the SKIP buttons to choose the tracking number you wish to memorize
Press the MEMORY button again to save. 20 radio stations can be stored in memory.
Press the Preset +/ – (Folder -/+) (17, 18) button by Remote Control Unit to select and listen to a saved station.

Antenna

Extend the wire to obtain the best reception. You may need to turn or change the position of the unit to improve reception.

Press the Power button to turn off the unit and go to standby mode ( Clock mode)
Press CLOCK SET ( 5) by Remote Control Unit for 3 seconds. It will show a 24-hour format only.
The hour will blink. Press SKIP to set the hour.
Press the CLOCK SET (5) again: the minutes will blink. Press SKIP to set the minutes. Press the CLOCK SET button to finish the time set.

BLUETOOTH PAIRING: Receiver

As Bluetooth receiver, the main unit PR200 can receive music from the user’s Bluetooth mobile phone, and Bluetooth MP3 and play music directly via the unit.

Before starting the pairing process. Press the Power on the units.
Turn Function (4) on the unit to BT Bluetooth.
Meanwhile, switch the button (10) to BT. The unit will flash BT (Bluetooth).
Activate Bluetooth function in mobile phones. The unit will start to pair & search for code “PR200 /GPO” automatically.
When successfully paired, the display will stop flashing.
If the PR200 /GPO is not displayed in the Bluetooth device, press the button (19) on the unit or by Remote Control, button (1) to research the name.
To exit the Bluetooth function, turn the unit off
Auto-off
The transmitter/receiver will automatically switch off if no devices can be connected within __ minutes.
The BT Pair code “PR200 “ is for 1 user only. The user should disconnect the Bluetooth Pair from the mobile phone before the other can get successful pair.

OPERATING THE CD/ USB PLAYER

Turn the Power (2) On by remote control.
Press Function (4) to CD by remote control.
Insert a compact disc to the CD deck (13) or USB to USB Playback slot (8) on Amplifier; “CD” or “USB” will be displayed.

PLAY/PAUSE button

When music is stopped, press the button to play the music.
When music is playing, press the button to pause.
When music is paused, press the button to resume play.

STOP button

When music is playing or paused, press the button to stop.
When in programming tracks, press the button to exit the mode.

SKIP UP /NEXT button

When music is stopped, press the button to select the track you want to play (and go to the first track if currently on the last track).
When music is playing, press the button to skip to the next track (and go to the first track if currently playing the last track).
Press the button and hold for 2 seconds to fast-forward.
When playing programmed tracks, press the button to skip to the next programmed track (and go to the first track if currently playing the last track).

SKIP DOWN /BACK button

When music is stopped, press the button to select the track you want to play (and go to the last track if currently on the first track).
When music is playing, press the button to skip to the previous track (and go to the last track if currently playing the first track).
Press the button and hold for 2 seconds to rewind.
When playing programmed tracks, press the button to skip to the previous programmed track (and go to the last track if currently playing the first track).

KEY NUMBER ON REMOTE CONTROL
Press Key numbers 1 to 10 to select the song number..
Press Key number – 10 or +10. The song number is multiplied by 10.
Once the number is selected, music will play automatically.

REPEAT Play in CD or USB

Press the Mode button ( 3) by Remote Control to switch between three modes: Repeat One, Repeat Folder (FLD) or Repeat All ,
Repeat One mode, the player repeats the current CD track.
Repeat Folder mode, the player repeats the whole folder.
In repeat All mode, the player repeats all tracks on the CD; when it reaches end of the last track, it will return to the first track.
Press Mode (3) again & select OFF to turn off the function

RANDOM Play in CD or USB

Press Random [9] by Remote Control Unit
Press SKIP UP / DOWN or The tracks will be played randomly
To turn off Random Play, press RANDOM again

FOLDER + / –
In USB mode, press FOLDER – / + (17, 18) by Remote Control. The album no. will change
Press SKIP UP / DOWN or the select track no.
When the desired track is selected, music will play automatically.

MEMORIZING/PROGRAMMING CD, CD/MP3 & USB PLAY

User can only enter programs in STOP mode. Press the STOP (11) by remote control and then follow the instructions below.

Press the Function (4) to CD / CD/ MP3 & USB by remote control
Press the Memory button (15) by remote control. LCD display “PR01”.
“001” (track number on CD or USB), “Memory” function) and “01” (Memorized number).
The memorized number flashes.
Press the SKIP buttons to choose the tracking number you wish to memorize.
Press the Memory button (15) to save & confirm. The unit goes to the next memorized number you wish to store. Repeat the steps to save other track numbers.
The unit can store maximum 30 CD memories and 99 CD/MP3, USB memories. After it has stored to the maximum of memories, no further entry is possible.
If you press the STOP button while programming the unit, the unit clears the memorized content and returns to STOP mode.
If you press the PLAY/PAUSE button when the unit has been memorized, “Memory” is displayed and the unit starts playing the memorized tracks.
If you press the SKIP or buttons when playing memorized tracks, the unit skips to the previous or next memorized track.
If you press the STOP button when playing memorized tracks, the unit stops playing but memorized track selection is kept. Press the STOP button again to clear the memorized content and return to STOP mode.

Remark: Please note that the unit can only read FAT32 format USB drives with less than 32GB.

RECORDING AND STORING FROM TURNTABLE TO USB

Users can record favorite CD songs in MP3 format and store them on a memory device via the USB port (8).

Set Function (4) to CD mode.
Press the SKIP to select the song or track, then press the PLAY/PAUSE button (9).
Press the RECORD ( 7) to start sync encoding and the display will show ”USB” flashing.
Press Skip or select recording into USB or Press RECORD to confirm.
Press STOP to stop encoding.
Remark: CD recording must be synchronized. Press the STOP button (11) to confirm.
Note : Some CDs are copyrighted which means that you may not be able to encode from them. Always make sure you are allowed to copy from the format you are working with and that you are not infringing any copyright laws.

TS Function (Track / File separation )

On the main unit, press the TS button (7) (Track separation) by remote control to split the next song.
When recording from vinyl to USB, press the TS button (7) once at the end of the song. It will create a new file for another song for the record.
If the USB capacity is more than 4GB, the record time may delay by about 6 – 10 seconds for 2nd song.
To prevent incomplete song recording, lift up the Tone Arm while the USB drive is under checking. Lift down the Tone Arm while the USB is ready to record.

Delete file/ folder from USB
The file/folder can be deleted from the USB directly.

Go to the USB model. Press the SKIP or to select the song or track you want to delete
Press Delete on remote control. The USB file will be deleted

AUX-IN 1 (on rear panel)

Users can connect outside sources like TV, CD, cassette &, etc to hi-fi systems/Speakers via the turntable, use an audio 3.5 mm jack cable (not provided) with separate white and red plugs for the left and right stereo channels
To connect one end of the audio socket to the other side of the Aux-In 1 jack (R, L) on a real panel of the turntable.
Set the Function button to (Aux in 1 ) Audio In by remote control.
Operate the user’s TV/ CD/ Cassette as directed by your manufacturers.

AUDIO IN Via MP3 PLAYER & SMARTPHONE

Press the Power button to turn on the unit.
Set the Function button to (Aux in) Audio In by remote control.
Using a 3.5mm jack lead, (not provided ) to connect one end to the headphone socket on the MP3 player/smartphone and the other side to the Aux-In jack (7) on the main unit.
Operate your MP3 player/smartphone as directed by your manufacturer.

BASS BOOST

On the main unit, turn left and right the BASS button (11) to enjoy a more powerful Bass sound.

TREBLE
On the main unit, adjust the TREBLE (12) to achieve the ideal performance.

SPEAKER BALANCE
On the main unit, turn Speaker Balance (14) left and right to get the balance of speaker volume on the unit. VU meter will show the user the sound levels.

EQ (EQUALIZER)
Press the EQ (19) by the remote control unit to select the music format in Rock / POP/ Classic / JAZZ
Press EQ again to turn off the function.

MUTE
Press MUTE (16) on by remote control, there will be no sound.
Press MUTE again to turn the function off

HEADPHONE

On the main unit, you can plug stereo headphones (not included) equipped with a 3.5 mm jack and impedance of 8 ohms or greater into the unit’s headphone jack (6). When using headphones, the speakers are automatically disconnected.

WARNING:
USING HEADPHONES IMPAIRMENT

Set a low volume on the playback device before connecting the headphones to the sound source.
Avoid excessive volume, particularly over extended periods or frequent use. Excessive volume can result in permanent hearing impairment.
Note: When there is no sound output for about 60 minutes in CD, USB, Bluetooth or AUX mode, the unit will automatically switch to standby mode to save energy. It can be turned on again by using the AUDIO IN / CD/ USB/ TUNER/Bluetooth Function button.

SPECIFICATIONS

Power supply: AC 100 ~ 240V ~ 60Hz
Power consumption: 25 WATTS
FM Radio frequency coverage: FM 87.5 – 108 MHz

Hereby ProtelX declares that this equipment (GPO PR200) is in compliance with the essential requirements and other relevant provisions of the Directive, you can access a copy of this certificate on www.gporetro.com/Certificate- ofConformity

www.gporetro.com
IMPORTED AND DISTRIBUTED BY:
ProTelX Ltd, Unit 6, Park 17 Industrial Estate, Moss Lane,
Whitefield, Manchester, M45 8FJ UK