HIhome WZB-TRVLP Smart Radiator Thermostat User Manual
- June 3, 2024
- HIHOME
Table of Contents
HIhome WZB-TRVLP Smart Radiator Thermostat
What inside the box
Specifications
- Power source: 2x AA Battery (do not use recharable ones)
- Battery life: 1 year
- Bereik/Range/Reichweite: 30m Open Air
Dimensions
Manual Control
Push button for functions Rotary knob to set temperature manually
Display
- Connection indicator
- Temperature setting
- Program active
- Heating On
- Low battery indicator
Installation
Functions
ON/OFF
Temperature setting low (<5ºC) – “OF” , Temperature setting high (>30ºC) –
“ON”
Open window function
If the radiator is on and a door or window is opened causing the room
temperature to drop more than 6ºC within 4 minutes, the thermostat will close
and display “OP”. If the temperature rises by 2ºC, the setting will resume.
Anti-blocking function
To prevent the radiator valve from blocking when the radiator is not in use
for a long period of time, the valve will be fully closed once every fortnight
for 30 seconds and opened again. The display will show.
Child lock
To prevent unwanted changes to settings, the button can be set to child
lock. To do so, press the button for 10 seconds. Child lock is confirmed with
the display “LC”. To unlock, press the button again for 10 seconds.
Anti-freeze
When switched off, the display will show “ “ when frost protection is
activated. The frost protection function comes on at temperatures below 5ºC
and switches off at 8ºC.
Alarm
When there is a malfunction or defect, the display will show “Er”. Reset
the appliance by removing the battery and see if the malfunction has been
resolved. If this is not the case, contact your shop.
Batteries almost empty
If the battery voltage is too low and the batteries need to be replaced,
the symbol is displayed. Replace the batteries. (note: do not use rechargeable
batteries)
Temporary override
To temporarily adjust the termperature during a programme, the rotary knob
can be operated. As soon as the next programme moment is reached, the
programme will resume.
Hihome App
Download the Hihome Smart App for iOS of Android
Gateway
A Hihome Zigbee Gateway is required to use the Smart Thermostat. Con-sult the Gateway manual to add the Gateway to your Hihome Smart Home.
Add Thermostat
Turn the knob to the “OF” position. Then press the knob for some time until “- – “ becomes visible. The thermostat is then reset and ready for connection. Press “+” in the App and follow the steps.
The usage
Set the desired temperature. If the programme is active, it will resume at the next time point.
Set Program
Set a day and week cycle as desired. If you are ab-sent for a longer period of time, the “Away” mode can be activated. The temperature setting will then be set to 16ºC continuously.
A© 2020 At Home Technologies BV – Oosterbeek -The Netherlands.
www.hihome.eu for more information and manuals:
https://support.hihome.eu
FA¼r weitere Informationen und HandbA¼cher: https://support.hihome.eu
References
- Hihome, Smart Home made Easy
- Met welke radiatorkranen zijn de Hihome Smart Radiator Thermostaten compatibel? - Hihome Knowledge Base
- Hihome Knowledge Base
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>