iMPLUSE TAGG-IMPULSE-01 Wireless Bluetooth Earphone Instruction Manual
- June 14, 2024
- iMPLUSE
Table of Contents
iMPLUSE TAGG-IMPULSE-01 Wireless Bluetooth Earphone
Product Information
- The product is a set of wireless earphones with a charging case. It uses Bluetooth technology to connect to your iPhone or Android device, allowing you to listen to music and take calls wirelessly.
- The earphones have a multifunction touch control feature, enabling you to control music playback, access Siri, and handle incoming calls.
- The charging case is used to charge both the earphones and itself. It has a micro-USB charging port and comes with a micro-USB charging cable. The case has LED indicators to show the charging status for both the case and the earphones.
- The earphones have an automatic pairing feature, which means they only need to be paired with your device once. After the initial pairing, they will automatically connect to your device whenever you use them.
- The product comes with a 12-month warranty. Please note that the warranty will be void if the product has been abused or exposed to moisture. For warranty claims, please contact the retailer where you purchased the product.
Product Usage Instructions
- Before connecting to Bluetooth, ensure that the earphones are fully charged.
- Plug the included micro-USB charging cable into the charging case’s bottom slot and connect the other end to a USB adapter. The case will start charging, indicated by a flashing red LED. When fully charged, the LED will turn solid red.
- To charge the earphones, slide each earphone into its corresponding dock in the charging case until fully seated. The earphones will start charging, indicated by a solid red LED on the earphones and a solid blue LED on the charging case. When fully charged, the LED on the earphones will turn blue.
- To connect the earphones to your device via Bluetooth:
- Open the upper cover of the charging case and take out the earphones. The earphones will flash red and blue, indicating they are turned on.
- Both earphones should be flashing blue, indicating they are paired with each other.
- Open the Bluetooth settings on your iPhone or Android device and select “iMPULSE” from the available devices. The earphones will automatically pair with your device.
- Once paired, the blue light on the earphones will turn off.
- Now you can listen to music and enjoy using the earphones.
- If the earphones fail to connect with each other, turn off both earphones, place them back into the charging case, delete “iMPULSE” from your Bluetooth settings, and repeat the steps for connecting Bluetooth.
- The battery level remaining in the earbuds can be seen on the top right-hand corner of your device when they are paired. The voice prompt “Low Battery” will notify you when the earphones need to be recharged.
- The earphones have a multifunction touch control:
- To play music, tap 2 times on the right earphone.
- To pause music, tap 2 times on the left earphone.
- To skip to the next song, tap 3 times on the right earphone.
- To go back to the previous track, tap 3 times on the left earphone.
- To activate Siri, hold for 2 seconds on either the left or right earphone.
- To answer an incoming call, tap 2 times on the right earphone.
- To end a call, tap 2 times on the left earphone.
- To reject a call, long press for 2 seconds on either the left or right earphone.
INSTRUCTION
INSTRUCTION MANUAL – WIRELESS (BT) IN-EAR EARPHONES (Wireless Earphones
with charging case)
Please charge the earphones fully before trying to connect to Bluetooth
Specs:
- Bluetooth Version: 5.0+EDR
- Build In MIC: Dual
- Operating Distance: 10-12 m
- Charging time: Earbuds 1.5-2.0 Hours
- Talk/playing time: 3 – 4 Hours
- Standby time: Up To 100 Hours
- Colors: White and black
- Battery capacity: 40mAh/300mAh Noise reduction (Not Noise-canceling)
Charging Your Charging Case
- To charge your charging case, plug the included micro-USB charging cable into the slot on the bottom of the charging case.
- Plug the other end into a USB adapter.
- The case will automatically begin charging, and a red LED Battery Indicator WILL Flash while charging. When it is fully charged, the LED will become solid red.
Charging your earbuds
- To charge your Earphones, simply slide each Earphone into its corresponding dock until the Earphone is fully seated.
- The Earphones will begin charging, indicated by a solid red LED glow on the Earphones and a solid blue LED glow on the charging case.
- When the Earphones are fully charged, the LED on the Earphones will turn blue.
Connecting with Bluetooth
- Step 1： Open the upper cover of the charging case and take out the Earphones, the lights will flash red and blue, and the Earphones are then turned on.
- Step 2: Once Earphones have been taken out of the case, they should both be flashing blue, this means they are paired to each other.
- Step 3: Open your Bluetooth settings on your iPhone or Android device. Press your Bluetooth menu on your device and iMPULSE should appear for connection. As soon as this appears click on it and the Earphones will pair automatically to your device.
- Step 4: Once paired/connected the blue light on your Earphones will turn off
- Step 5: Listen to music and enjoy.
- NOTE： If Earphones fail to connect with each other, please turn off both Earphones and place them back into the charging box. Delete iMPULSE in your Bluetooth settings on your device. Then restart the steps for connecting Bluetooth again.
Automatic pairing:
- You only have to pair your Earphones to your device for the first time for them to automatically pair the next time you use them.
- This means you will not need to complete the pairing process every time you use your Earphones.
Battery indicator:
- Shows the battery level remaining when the earbuds are paired with your smart phone.
- You will be able to see this in the top right-hand corner of your device.
- Note: The voice prompt “Low Battery” will notify you when the Earphones need to be recharged
Multifunction Touch Control:
- Play: 2 taps on the Right Earphone
- Pause music: 2 taps on Left Earphone.
- Next song: Tap 3 times on Right Earphone to skip a track
- Back a Track: Tap 3 times on the Left Earphone to go back a track
- Siri function: Long hold for 2 seconds on Left or right Earphone.
- Receiving Calls: 2 taps on the Right Earphone to answer the call
- Hang up call: 2 taps on Left Earphone for ending call.
- Reject call: Long press for 2 seconds on the Left or Right Earphone.
Warnings:
- Use this product with care do not drop or expose the product to force. Keep the product away from high temperatures, high humidity, and moisture.
- For best performance avoid using near Wi-Fi or Routers as the Bluetooth signal can be affected and/or disconnected.
- Use the product within reach of the device with which the product is paired.
- This product can be paired with any device that supports Bluetooth settings.
- The warranty is not covered in case of damage caused by negligence or used in contact with water or moisture.
Warranty
- This product has a 12 Month warranty: Warranty is Null and Void if the product has been ‘Abused or been exposed to Moisture’
- All warranty claims are to be returned to the retailer where purchased.
- QR code – visit www.buyonimpulse.com.au.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>