GPO Memphis 4-in-1 Music Centre with CD Player User Manual

GPO Memphis 4-in-1 Music Centre with CD Player

PARTS / BUTTONS

Before use, detach the stylus guard (white plastic cover) by pulling it straight off the front of the cartridge in the direction of the arrow.

1. Turntable platter
2. 45 rpm adapter
3. Lift lever (use this lever to lift the tonearm)
4. Tonearm
5. Speed selector
6. Tonearm rest
7. Display
8. Speakers
9. Open/Close button
10. Tuning control knob
11. FM/FM stereo selector
12. Mode button (Programme, Repeat 1, Repeat Album, Repeat All)
13. BBS button
14. Skip + button
15. Skip – button
16. SD/MMC card slot
17. Stop/CD/USB/SD button
18. USB port
19. Play/Pause button
20. AUX IN
21. Record button
22. Function button
23. Volume control
24. CD door
25. Power indicator
26. IR sensor
27. Auto-stop (ON/OFF) selector
28. Line out socket
29. FM antenna
30. AC power cord

OPERATING THE RADIO

FM TUNER

1. Set the FUNCTION button (22) to the RADIO position.
2. Tune in to the desired radio station by turning the Tuning control knob (10).
3. Adjust the volume (23) to the desired level.
4. Set the FUNCTION button (22) to the OFF position to turn off the radio.

Antenna
Extend the wire to obtain the best reception. You may need to turn or change the position of the unit to improve reception.

FM Stereo and Mono Reception
When an FM signal is tuned to the FM stereo (11) position it can be received in stereo. The FM Stereo indicator will appear on the LCD display (7).

OPERATING THE TURNTABLE

Before use, please make sure to: Lift the dust cover. Release the tonearm clamp and remove the stylus protector.

Listening to records

1. Set the FUNCTION button (22) to the PHONO position.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the central spindle when playing 17cm EP records.
3. Set the Speed selector (5) to 33, 45 or 78 rpm depending on the record.
4. Release the tonearm clamp and remove the stylus protector.
5. Lift the tonearm from the tonearm rest by using the Lift lever.
6. Place the tonearm on the desired position of the record.
7. Gently lower the tonearm onto the record to start playing.
8. When the record is finished the tonearm will automatically stop. Lift the tonearm from the record and put it back on the rest.
9. To stop manually, lift the tonearm from the record and return it to the rest.
10. Set the Auto-stop (ON/OFF) selector to the ON position to use the auto-stop function.

In the ON position, 33 rpm records will automatically stop when the end of the record is reached. 45 and 78 rpm records can play the whole song when the auto-stop function is OFF.

Note: Do not stop or turn the platter manually.

Moving or jarring the turntable without securing the tonearm clamp could result in damage to the tonearm. Replace the protective cap on the stylus when not in use.

LINE-OUT CONNECTION

You can connect the unit to external speakers (4 ohm) via the Speaker output L, R sockets (external speakers are not included).

Note: Sound will still come from the original built-in speakers even after the external speakers are connected.

SELECTING THE SOURCE – Stop/CD/USB/SD (17) button

Press this button and hold for 3 seconds to switch between CD, USB or SD mode.

Remark: Please note that only the USB keys with format FAT32 and under a capacity of 32Gb can be read by the unit.

LISTENING TO COMPACT DISCS

1. Set the FUNCTION button (22) to the CD position.
2. Press the PLAY/PAUSE button once to start playing the CD from the first track. “Play” will appear on the display.
3. Press the PLAY/PAUSE button once again to pause playback. “Pause” will appear on the display and the track number will flash.
4. To stop playback, press the Stop/CD/USB/SD button.

In CD mode, this unit can read CD, CD-R and CD-RW discs. This unit cannot play MP3 CDs, but it can play MP3 files on a USB flash drive.

SKIPPING TRACKS
Selecting a different track during playback

1. Press the SKIP +/ SKIP – buttons (14, 15). The track number ap-pears on the display.
2. Press the PLAY/PAUSE button to start playing the selected track.

REPEAT CD PLAY

1. When playing a CD, if you wish to listen to the same track repeated-ly, press the MODE button (12) on the unit.
2. To play the entire disc over and over again, press the MODE button twice. “REP ALL “ will be displayed.
3. To cancel repeat play, press the STOP button or press the MODE button repeatedly until the repeat indicator disappears.

Note: The “REP ALL” function affects both normal and programmed playback.

PROGRAMMED DISC PLAY (CD)
You cannot enter programs while playing a CD. Press the STOP button (17) and then follow the instructions below.

1. Press the unit’s MODE button (12) and select PROGRAMME. The information is displayed on the LCD display.
2. Press the unit’s SKIP +/SKIP – buttons (14, 15) to select the location in which the track should be stored i.e. track 03.
3. Press the MODE button (12) and select PROGRAMME. The first programmed selection is now stored in the programme memory.

Listening to programmed tracks
Press the PLAY/PAUSE button (19). The CD will start playing at the beginning of the first programmed track. To clear the programmed memory: If the disc is playing, press the STOP button (17) to stop the disc. Turn off the device or use the FUNCTION button (22) to exit CD mode.

USING A USB / SD CARD

1. Insert the USB flash drive into the USB port (18) or the SD card into the SD card slot (16).
2. Press the Stop/CD/USB/SD button (17). The total number of tracks will be shown on the display and play automatically. NOTE: Only MP3 format files are supported.

Not all USB flash drive brands are supported.

Playing the entire USB or SD card

When inserting a USB flash drive or SD CARD, playback will start auto- matically with the first track. The current track number is displayed.

1. To stop playback, press the PLAY/ PAUSE button (19) . The time elapsed will flash.
2. To continue playback, press the PLAY/ PAUSE button again.
3. To stop playback, press the STOP button (17).

RECORDING AND STORING FROM CD

You can record your favourite CD songs in MP3 format and store them on a memory device via the USB port (18) or SD/MMC card slot (16).

1. Set the FUNCTION button (22) to CD mode.
2. Press the SKIP +/SKIP – buttons (14, 15) to select the song or track you wish to record and then press the PLAY/PAUSE button (19).
3. Insert the USB flash drive into the USB port (18). Press the RE-CORD button (21) to start synchronized recording. “>USB” will be displayed indicating the track is being recorded to USB.
4. Insert the SD/MMC card into the SD/MMC slot (16). Press the RECORD button (21) to start synchronized recording. “>SD” will be displayed indicating the track is being recorded to SD or MMC.
5. Press the STOP button (17) to stop recording.
6. If you insert the USB flash drive and SD/MMC card into the unit at the same time: press the RECORD button (21) to start synchronised recording; “USB or CARD” will flash on the display. Then press the SKIP +/SKIP – buttons (14, 15) to select recording to USB or card and press the RECORD button to confirm.
7. Press the STOP button (17) to stop recording.
8. Note: CD recording must be synchronised. Press the STOP button to confirm.

Attention: Some original CDs may not be recordable as they are copy- protected.

RECORDING AND STORING FROM TURNTABLE

You can record you favourite vinyl songs in MP3 format and store them on a memory device via the USB port (18) or SD/MMC card slot (16).

1. Set the FUNCTION button (22) to PHONO mode.
2. Insert the USB flash drive into the USB port (18). Press the RE-CORD button (21) to start synchronized recording. “>USB” will be displayed indicating the track is being recorded to USB.
3. Insert the SD/MMC card into the SD/MMC slot (16). Press the RECORD button (21) to start synchronized recording. “>SD” will be displayed indicating the track is being recorded to SD or MMC.

REMOTE CONTROL

1. Remove the battery cover from the back of the remote control.
2. Insert a CR2025 (3V) battery (included) making sure that the + and symbols on the battery match those on the battery compartment.
3. Replace the battery cover.

1. PLAY/PAUSE button
2. RECORD button
3. Stop/CD/USB/SD button
4. Skip – button
5. Skip + button
6. OPEN button
7. PROGRAMME button
8. MODE button (Programme, Repeat 1, Repeat Album, Repeat All)
9. Folder Up button
10. Folder Down button
11. Remote sensor

BATTERY REPLACEMENT

When the battery runs low, the distance at which the remote control will operate is greatly reduced and you will need to replace the battery.

Remark: In order to save energy when the unit has no sound output for a while, the unit will be switched to stand-by automatically. It can be switched ON by using the function selector again.

USING THE REMOTE CONTROL

1. To use the remote control, point it at the remote sensor (11) and press the button gently but firmly. Since the remote control range is reduced when the unit is used at an angle, try to aim it directly at the remote sensor.
2. Do not expose the remote sensor to strong light (direct sunshine or artificial light) and make sure that there are no obstacles between the remote sensor and the remote control.

SPECIFICATIONS

• Power supply: AC 230V – 50Hz
• Power consumption: 13W
• Radio frequency coverage: FM – 108 MHz

References

• Certificates Of Conformity | GPO Retro
• GPO Retro - Official Manufacturer of Stylish Retro Products.
• GPO Retro - Official Manufacturer of Stylish Retro Products.
• Certificates Of Conformity | GPO Retro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>