GPO746 Push Button Phone User Guide
- June 9, 2024
- GPO
Table of Contents
GPO746 Push Button Phone User Guide
Important safety instructions
- Never install telephone wiring during a lightning storm.
- Never install telephone jacks in wet locations, unless the jack is specifically designed for wet locations.
- Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface.
- Do not place this product on an unstable cart, stand or table. The product may fall, causing damage to the product.
Installation
TEL LINE
|
- Connect the telephone line cord to the line jack (RJ11C). To ensure proper connection, press the locking tab firmly into the modular jack until a “click” sound is heard.
---|---
Adjustment
VOLUME
|
- Set the phone handset volume to either High or Low lever selector to your own preference.
---|---
RINGER
|
- Set the ringer volume lever selector to on (with sounds) or off to your own preference.
Making Calls
|
- Remove the receiver from the cradle.
---|---
|
- Dial your desired Numbers.
Receiving Call
|
- When there is an incoming call, lift the receiver from the cradle and talk into the mouthpiece to begin your conversation
---|---
|
- To terminate the conversation, replace the receiver back in the cradle
CE Statement
This equipment conforms to the following European standards:
Health & safety:
EN60950-1:2001 (+A11:2004)
EN50371:2002
Electromagnetic compatibility:
EN55022:2006 emissions
EN55024:1998 + A1:2001 immunity.
Telecom:
ES 203021 parts 1, 2 & 3 TBR38
References
Read User Manual Online (PDF format)
Loading......