Shelly 1 WiFi Relay Switch User Guide
- October 26, 2023
- Shelly
Table of Contents
WiFi Relay Switch
USER GUIDE
1 WiFi Relay Switch
| Power supply: 110-240V AC | Power supply: 12V; 30-50V DC |
|---|---|
LEGEND:
N – Neutral input (Zero)/( + )
L – Line input (110-240V)/( – )
O – Output
I – Input
SW – Switch (input) controlling O
Frigidaire Gallery Refrigerator Rev...
Frigidaire Gallery Refrigerator Review
The WiFi Relay Switch Shelly ® 1 may control 1 electrical circuit up to 3.5 kW. It is intended to be mounted into a standard in-wall console, behind power sockets and light switches, or in other places with limited space. Shelly may work as a standalone device or as an accessory to another home automation controller.
- Purpose of control: perating
- Construction of control: Independently mounted
- Type 1. B Action
- Pollution Degree 2
- Impulse Voltage: 4000 V
Hazardous voltage is present on a bridge on the top side of the product!
Specification
Power supply:
-
110-240V ±10% 50/60Hz AC
-
30-50V DC
-
12V DC
Max load:
16A/240V
Complies with EU standards: -
RE Directive 2014/53/EU
-
LVD 2014/35/EU
-
EMC 2004/108/WE
-
RoHS2 2011/65/UE
Working temperature:
– 20°C up to 40°C
Radio signal power:
1mW
Radio protocol:
WiFi 802.11 b/g/n
Frequency:
2400 – 2500 MHz;
Operational range (depending on local construction):
- up to 50 m outdoors
- up to 30 m indoors
Dimensions (HxWxL):
41 x 36 x 17 mm
Electrical consumption:
< 1 W
Technical Information
- Control through WiFi from a mobile phone, PC, Automation system, or any other Device supporting HTTP and/or UDP protocol.
- Microprocessor management.
- Controlled elements: 1 electrical circuits/appliances.
- Controlling elements: 1 relay.
- Shelly may be controlled by an external button/switch.
CAUTION! Danger of electrocution. Mounting the Device to the power grid
has to be performed with caution.
CAUTION! Do not allow children to play with the button/switch connected
to the Device. Keep the Devices for remote control of Shelly (mobile phones,
tablets, PCs) away from children.
Introduction to Shelly ®
Shelly ® is a family of innovative Devices, which allow remote control of
electric appliances through mobile phones, PC, or home automation systems.
Shelly ® uses WiFi to connect to the devices controlling it. They can be on
the same WiFi network or they can use remote access (through the Internet).
Shelly ® may work standalone, without being managed by a home automation
controller, in the local WiFi network, as well as through a cloud service,
from everywhere the User has Internet access.
Shelly® has an integrated web server, through which the User may adjust,
control and monitor the Device. Shelly ® has two WiFi modes – Access Point
(AP) and Client mode (CM). To operate in Client Mode, a WiFi router must be
located within the range of the Device. Shelly ® devices can communicate
directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly® devices may be available
for monitor and control even if the User is outside the range of the local
WiFi network, as long as the WiFi router is connected to the Internet. The
cloud function could be used, which is activated through the web server of the
Device or through the settings in the Shelly Cloud mobile application.
The User can register and access Shelly Cloud, using either Android or iOS
mobile applications, or any internet browser and the website:
https://my.Shelly.cloud/.
Installation Instructions
CAUTION! Danger of electrocution. The mounting/installation of the Device
should be done by a qualified person (electrician).
CAUTION! Danger of electrocution. Even when the Device is turned off, it
is possible to have voltage across its clamps. Every change in the connection
of the clamps has to be done after ensuring all local power is powered
off/disconnected.
CAUTION! Do not connect the Device to appliances exceeding the given max
load!
CAUTION! Connect the Device only in the way shown in these instructions.
Any other method could cause damage and/or injury.
CAUTION! Before beginning the installation please read the accompanying
documentation carefully and completely. Failure to follow recommended
procedures could lead to malfunction, danger to your life, or violation of the
law. Allterco Robotics is not responsible for any loss or damage in case of
incorrect installation or operation of this Device.
CAUTION! Use the Device only with power grids and appliances which comply
with all applicable regulations. A short circuit in the power grid or any
appliance connected to the Device may damage the Device.
RECOMMENDATION: Тhe Device may be connected to and may control electric
circuits and appliances only if they comply with the respective standards and
safety norms.
RECOMMENDATION: The Device may be connected with solid single-core cables
with increased heat resistance to insulation not less than PVC T105°C.
Initial Inclusion
Before installing/mounting the Device ensure that the grid is powered off
(turned down breakers).
Connect the Relay to the power grid and install it in the console behind the
switch/power socket following the scheme that suites the desired purpose:
- Connecting to the power grid with a power supply of 110-240V AC or 30-50V DC– fig. 1
- Connecting to the power grid with a power supply of 12 DC – fig.2
For more information about the Bridge, please visit: http://shelly-api-
docs.shelly.cloud/#shelly-family-overview or contact us at:
developers@shelly.cloud
You may choose if you want to use Shelly with the Shelly Cloud mobile
application and Shelly Cloud service. You can also familiarize yourself with
the instructions for Management and Control through the embedded Web
interface.
Control your home with your voice
All Shelly devices are compatible with Amazon Echo and Google Home.
Please see our step-by-step guide on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
MOBILE APPLICATION FOR MANAGEMENT OF SHELLY ®
http://shelly.cloud/app_download/?i=android
http://shelly.cloud/app_download/?i=ios
Shelly Cloud gives you the opportunity to control and adjust all Shelly ®
Devices from anywhere in the world. You only need an internet connection and
our mobile application, installed on your smartphone or tablet.
To install the application please visit Google Play (Android – fig. 3) or App
Store (iOS – fig. 4) and install the Shelly Cloud app.
Registration
The first time you load the Shelly Cloud mobile app, you have to create an
account that can manage all your Shelly ® devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail address you
have used in your registration. You will then receive instructions to change
your password.
WARNING! Be careful when you type your e-mail address during the
registration, as it will be used in case you forget your password.
First steps
After registering, create your first room (or rooms), where you are going to
add and use your Shelly devices.
Shelly Cloud gives you the opportunity to create scenes for automatic turning on or off of the Devicesat predefined hours or based on other parameters like temperature, humidity, light, etc. (with the available sensor in Shelly Cloud). Shelly Cloud allows easy control and monitoring using a mobile phone, tablet, or PC.
Device Inclusion
To add a new Shelly device, install it to the power grid following the
Installation Instructions included with the Device.
Step 1
After the installation of Shelly following the Installation Instructions and
the power is turned on, Shelly will create its own WiFi Access Point (AP).
WARNING: In case the Device has not created its own AP WiFi network with SSID like shelly1 – 35FA58, please check if the Device is connected accordingly to the Installation Instructions. If you still do not see an active WiFi network with SSID like shelly1-35FA58 , or you want to add the Device to another Wi-Fi network, reset the Device. If the Device has been powered on, you have to restart it by powering it off and on again. After turning the power on, you have one minute to press 5 consecutive times the button/ switch connected to SW. You have to hear the Relay trigger itself. After the trigger sound, Shelly should return to AP Mode. If not, please repeat or contact our customer support at: support@Shelly.cloud
Step 2
Choose “Add Device”.
In order to add more devices later, use the app menu at the top right corner
of the main screen and click “Add Device”. Type the name (SSID) and password
for the WiFi network, to which you want to add the Device.
Step 3
If using iOS: you will see the following screen:
Press the home button of your iPhone/iPad/iPod. Open Settings > WiFi and
connect to the WiFi network created by Shelly, e.g. shelly1-35FA58.
If using Android: your phone/tablet will automatically scan and include
all new Shelly Devices in the WiFi network that you are connected to.
Upon successful Device Inclusion to the WiFi network, you will see the following pop-up:
Step 4:
Approximately 30 seconds after the discovery of any new Devices оn the local
WiFi network, а list will be displayed by default in the “Discovered Devices”
room.
Step 5:
Enter Discovered Devices and choose the Device you want to include in your
account.
Step 6:
Enter a name for the Device (in the Device Name field). Choose a Room, in
which the Device has to be positioned. You can choose an icon or add a picture
to make it easier to recognize. Press “Save Device”.
Step 7:
To enable connection to the Shelly Cloud service for remote control and
monitoring of the Device, press “YES” on the following pop-up.
Shelly devises Settings
After your Shelly device is included in the application, you can control it,
change its settings and automate the way it works.
To switch the device on and off, use the respective ON/OFF button.
To enter the details menu of the respective Device, simply click on its name.
From the details menu, you may control the Device, as well as edit its
appearance and settings.
EDIT DEVICE – allows you to change the Device’s name, room, and picture.
DEVICE Settings – allows you to change settings. For example, with
Restrict login you may enter a username and password to restrict access to the
embedded web interface in Shelly. You may automate the Device operations from
this menu as well.
Timer
To manages the power supply automatically, you may use:
Auto OFF: After turning on, the power supply will automatically shut down
after a predefined time (in seconds). A value of 0 will cancel the automatic
shutdown.
Auto On: After turning off, the power supply will be automatically turned
on after a predefined time (in seconds). A value of 0 will cancel the
automatic power-on.
Weekly Schedule
This function requires an Internet connection. To use the Internet, a Shelly
Device has to be connected to a local WiFi network with a working internet
connection. Shelly may turn on/off automatically at a predefined time and day
throughout the week. You may add an unlimited number of weekly schedules.
Sunrise/Sunset
This function requires an Internet connection. To use the Internet, a Shelly
Device has to be connected to a local WiFi network with а working Internet
connection. Shelly receives actual information through the Internet about the
time of sunrise and sunset in your area. Shelly may turn on or off
automatically at sunrise/sunset, or at a specified time before or after
sunrise/sunset.
Settings:
Power On Default Mode
Тhis setting controls whether the Device will supply power or not the output
as a default whenever it is receiving power from the grid:
ON: When the Device is powered, by default the socket will be powered.
OFF: Even if the Device is powered, by default the socket will not be
powered.
Restore Last Mode: When power is restored, by default, the appliance will
return to the last state it was in before the last power off/shutdown.
Button Type
• Momentary – Set Shelly’s input to be buttoned. Push for ON, push again
for OFF.
• Toggle Switch – Set Shelly input to be flip switches, with one state for
ON and another state for OFF.
Firmware Update : This shows the present firmware version. If a newer
version is available, you can update your Shelly Device by clicking Update.
Factory reset: Remove Shelly from your account and return it to its
factory settings.
Device Information: Here you can see the unique ID of Shelly and the IP
it got from the Wi-Fi network.
The Embedded Web Interface
Еven without the mobile app, Shelly can be set and controlled through a
browser and WiFi connection of a mobile phone, tablet, or PC.
ABBREVIATIONS USED:
Shelly-ID – the unique name of the Device. It consists of 6 or more
characters. It may include numbers and letters, for example, 35FA58.
SSID – the name of the WiFi network, created by the Device, for example,
shelly1-35FA58.
Access Point (AP) – the mode in which the Device creates its own WiFi
connection point with the respective name (SSID).
Client Mode (CM) – the mode in which the Device is connected to another
WiFi network.
Initial inclusion
Step 1
Install Shelly to the power grid following the schemes described above and
place it into the console. After turning the power on Shelly will create its
own WiFi network (AP).
WARNING: If you do not see an active WiFi network with SSID like
shelly1-35FA58, reset the Device. If the Device has been powered on, you have
to restart it by powering it off and on again. After turning the power on, you
have one minute to press 5 consecutive times the button/switch connected to
SW. You have to hear the Relay trigger itself. After the trigger sound, Shelly
should return to AP Mode. If not, please repeat or contact our customer
support at: support@Shelly.cloud
Step 2
When Shelly has created their own WiFi network (own AP), with name (SSID) such
as shelly1-35FA58. Connect to it with your phone, tablet, or PC.
Step 3
Type 192.168.33.1 into the address field of your browser to load the web
interface of Shelly.
General – Home Page
This is the home page of the embedded web interface. If it has been set up is
correct, you will see information about:
- Settings menu button
- Current state (on/off)
- Present time
Settings – General Settings
In this menu, you can configure the Shelly device’s work and connection modes.
WiFi Settings – the WiFi connection settings.
Access Point (AP) Mode : allows the Device to operate as a WiFi access
point. The User can change the name (SSID) and the password to access the AP.
After you have entered the desired settings, press Connect.
WiFi Client Mode (CM) : allows the Device to connect to an available WiFi
network. In order to switch to this mode, the User must enter the name (SSID)
and the password to connect to a local WiFi network. After entering the
correct details, press Connect.
ATTENTION! If you have entered incorrect information (wrong settings,
usernames, passwords, etc.), you will not be able to connect to Shelly and you
have to reset the Device.
WARNING: If you do not see an active WiFi network with SSID like
shelly1-35FA58, reset the Device. If the Device has been powered on, you have
to restart it by powering it off and on again. After turning the power on, you
have one minute to press 5 consecutive times the button/switch connected to
SW. You have to hear the Relay trigger itself. After the trigger sound, Shelly
should return to AP Mode. If not, please repeat or contact our customer
support at: support@Shelly.cloud
Login: Access to the Device
Leave Unprotected – removing the notification for disabled authorization.
Enable Authentication – you can turn authentication on or off This is
where you can change your username and password.
You must enter a new username and the new password, then press Save to
save the changes.
Connect to Cloud: you can turn the connection between Shelly and Shelly
Cloud on or off.
Factory reset: Return Shelly to its factory settings.
Firmware Upgrade: This shows the present firmware version. If a newer
version is available, you can update your Shelly Device by clicking Update.
Device Reboot: Reboots the Device.
Managing in Relay Mode
Relay Screen
On this screen, you can control, monitor, and change the settings for turning
the power on and off. You can also see the current status of the connected
appliance to Shelly, Buttons Settings, On, and OFF.
To control Shelly press Relay:
To turn on the connected circuit press “Turn ON”.
To turn off the connected circuit press “Turn OFF”
Press the icon ≻ to go to the previous menu.
Shelly Management Settings
Each Shelly can be configured individually. This lets you personalize each
Device in a unique manner, or consistently, as you choose.
Power On Default State
This sets the relays’ default state when powered from the power grid.
ON: By default when the Device is powered and the connected
circuit/appliance to it will be powered as well.
OFF: By default, the Device and any connected circuit/appliance will not
be powered, even when it is connected to the grid.
Restore Last State: By default, the Device and the connected
circuit/appliance will be returned to the last state they occupied (on or off)
before the last power off/shutdown.
Auto ON/OFF
Automatic powering/shutdown of the socket and the connected appliance:
Auto OFF after : After turning on, the power supply will automatically
shut down after a predefined time (in seconds). A value of 0 will cancel the
automatic shutdown.
Auto ON after : After turning off, the power supply will be automatically
turned on after a predefined time (in seconds). A value of 0 will cancel the
automatic start.
Manual Switch Type
- Momentary – When using a button.
- Toggle Switch – When using a switch.
- Edge switch – Change status on every hit.
Sunrise/Sunset hours
This function requires an Internet connection. To use the Internet, a Shelly
Device has to be connected to a local WiFi network with а working Internet
connection. Shelly receives actual information through the Internet about the
time of sunrise and sunset in your area. Shelly may turn on or off
automatically at sunrise/sunset, or at a specified time before or after
sunrise/sunset.
On/Off schedule
This function requires an Internet connection. To use the Internet, a Shelly
Device has to be connected to a local WiFi network with a working internet
connection. Shelly may turn on/off automatically at a predefined time. Shelly
may turn on/off automatically at a predefined time.
The Declaration of Conformity is available at: https://Shelly.cloud
/declaration-of-conformity/
Changes in the contact data are published by the Manufacturer on the official
website of the
Device: http://www.Shelly.cloud
The User is obliged to stay informed of any amendments to these warranty terms
before exercising his/her rights against the Manufacturer.
All rights to trademarks She ® and Shelly ® and other intellectual rights
associated with this Device belong to Allterco Robotics GOOD. 