FLASH F2000535 SPOT 350W + Case User Manual

: June 6, 2024
: FLASH

Table of Contents

INTRODUCTION
SAFETY INFORMATION
PRODUCT INFORMATION
INSTALLATION
CONNECTION
- Voltage specification
- Connecting power supply
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

FLASH F2000535 SPOT 350W + Case

INTRODUCTION

THANK YOU FOR PURCHASING Follow Spot 350W. FOR SAFETY REASONS AND TO ENSURE THE TROUBLE-FREE OPERATION, CAREFULLY READ THE INSTRUCTIONS.

SAFETY INFORMATION

Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the fixture.
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the fixture.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
Disconnect main power before servicing and maintenance.
Use safety chain when fixes this fixture.
Don’t handle the fixture by taking its head only, but always by taking its base.
Do not use the device in high humidity conditions. Use in -10°C to +35°C
In the event of serious operating problem, stop using the fixture immediately. Never try to repair the fixture by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
Do not connect the device to any dimmer pack.
Do not touch any wire during operation and there might be a hazard of electric shock.
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or moisture.
The housing must be replaced if they are visibly damaged.
Do not look directly at the LED light spot while the fixture is on.
WARNING! The device must be connected to the power supply in order to avoid condensation.

WARNING!

Do not point strong light output from other fixtures at the Follow Spot 350W, as intense illumination can damaged the display.

PRODUCT INFORMATION

Light source: 1pcs 350W LED
Power supply: AC 110V/240V 50/60Hz,
Beam angle: 230
Focus (manual)
Color: 5 colors + white
Iris Effect (manual)
Aperture Effect (manual)
CTC: 3200K, 5600K, 6000K
Beam Distance: 70m
IP rating: IP20
Net Weight: 7,6 kg
Dimensions: H(18)xW(65)xD(22) cm
Dim. (case): H(52xW(73)xD(53) cm
Weight (case+FS): 26,6 kg

INSTALLATION

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture. fle equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no one pass by or under it.

CONNECTION

Voltage specification

Input Voltage

| Total Power|

Frequency

---|---|---

110/240V

| 350W|

50/60Hz

Connecting power supply

The connection is performed using power cable with connector (included). The device must be operated by qualified personnel.
Make sure that the power grid supply parameters are consistent with device parameters and limitations are not exceeded.

| CAUTION! In the case of cable damage do not attempt to repair. Replacement or repair can be made only on the manufacturer or by a person with appropriate permissions.
---|---

www.flash-butrym.pl