Klipsch ProMedia Heritage 2.1 BT Speaker Kit Instruction Manual
- June 6, 2024
- Klipsch
Table of Contents
Klipsch ProMedia Heritage 2.1 BT Speaker Kit
INSIDE
SPEAKER PLACEMENT
SUBWOOFER PLACEMENT
REMOTE
- ON / OFF
- LED ON / OFF
- Mute
- Night Mode
- Subwoofer Level Up
- Subwoofer Level Down
- Volume Up
- Volume Down
- USB Source Select
- Auxiliary Source Select
- Bluetooth® Source Select
- Play/Pause
SETUP
BLUETOOTH® WIRELESS TECHNOLOGY
CONNECTIONS
USB LISTENING
NIGHT MODE
- Reduces Dynamic Range
- Subwoofer OFF
- Can be ON regardless of Dolby Status or Virtual Surround Mode
- Only one EQ profile active at one time (Standard, Dialog Enhanced, or Night)
SUPPORT AND TROUBLESHOOTING
For support and troubleshooting for your Klipsch product, scan here with your smartphone or tablet or go to KLIPSCH.COM/SUPPORT
IMPORTANT SAFETY INSTRUCTIONS!
-
READ these instructions.
-
KEEP these instructions.
-
HEED all warnings.
-
FOLLOW all instructions.
-
DO NOT use this apparatus near water.
-
CLEAN ONLY with dry cloth.
-
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
DO NOT defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. -
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
ONLY USE attachments/accessories specified by the manufacturer.
-
USE ONLY with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
-
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
-
To completely disconnect this apparatus from the AC Mains, disconnect the power supply wall wart from the AC receptacle.
-
The mains plug/appliance coupler is used as a disconnect device, the disconnect device shall remain readily operable.
-
DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
The exclamation point, within an equilateral triangle, is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.
WARNING: To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain or moisture.
WARNING: No naked flame sources – such as candles – should be placed on
the product.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside. Refer all
servicing to qualified service personnel.
Place the equipment near a main power supply outlet and make sure that you can
easily access the power breaker switch.
WARNING: This product is intended to be operated ONLY from the AC
Voltages listed on the back panel or included power supply of the product.
Operation from other voltages other than those indicated may cause
irreversible damage to the product and void the products warranty. The use of
AC Plug Adapters is cautioned because it can allow the product to be plugged
into voltages in which the product was not designed to operate. If the product
is equipped with a detachable power cord, use only the type provided with your
product or by your local distributor and/or retailer. If you are unsure of the
correct operational voltage, please contact your local distributor and/or
retailer.
The use of apparatus is in tropical and/or moderate climates.
EU COMPLIANCE INFORMATION
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive
2014/35/EU; European Union EMC Directive 2014/30/EU; European Union
Restriction of Hazardous Substances Recast (RoHS) Directive 2011/65/EU;
European Union WEEE Directive 2012/19/EU; European Union Eco-Design Directive
2009/125/EC; European Union Registration, Evaluation, Authorization and
Restriction of Chemicals (REACH) Directive 2006/121/EC; European Union Radio
Equipment Directive
(RED) 2014/53/EU.
Hereby, Klipsch Group Inc. declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
You may obtain a free copy of the Declaration of Conformity by contacting your
dealer, distributor, or Klipsch Group, Inc.’s worldwide headquarters. Contact
information can be found here: http://www.klipsch.com/Contact-Us
WEEE NOTICE
Note: This mark applies only to countries within the European Union (EU) and
Norway.
This appliance is labeled in accordance with European Directive 2012/19/EU
concerning waste of electrical and electronic equipment (WEEE). This label
indicates that this product should not be disposed of with household waste. It
should be deposited at an appropriate facility to enable recovery and
recycling.
W52 and W53 bands are restricted to indoor operations only.
FCC EMC COMPLIANCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class B Digital
Device.
Caution: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this device.
FCC WIRELESS TRANSMITTER COMPLIANCE INFORMATION
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
CANADA EMC COMPLIANCE INFORMA-TION
Innovation, Science and Economic Development Canada statement:
This device complies with ISED’s license-exempt RSSs. Operation is subject to
the following two conditions:
- This device may not cause harmful interference; and
- This device must accept any interference received, including interference that may cause undesired operation.
CANADA WIRELESS TRANSMITTER COMPLIANCE INFORMATION
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
WIRELESS TRANSMITTER COMPLIANCE INFORMATION
The term “IC:” before the radio certification number only signifies that
Industry Canada technical specifications were met.
POWERED SPEAKERS/MUSIC SYSTEMS WARRANTY
Klipsch Group, Inc, (KGI) warrants to the original retail purchaser that this
product is to be free from defective materials and workmanship for a period of
one (1) years from the date of purchase, if it is properly used and
maintained. If this product proves defective in either material or
workmanship, KGI, at its option, will (a) repair the product, or (b) replace
the product, at no charge for parts or labor. If the product model is no
longer available and cannot be repaired effectively or replaced with an
identical model, KGI at its sole option may replace the unit with a current
model of equal or greater value. In some cases, modification to the mounting
surface may be required where a new model is substituted. KGI assumes no
responsibility or liability for such modification. To obtain a repair or
replacement under the terms of this warranty, please return to dealer first,
if possible, and the dealer will direct you accordingly for repairs or
replacement. You will be required to submit a copy of the original receipt.
Return shipping for exchanges/repairs is the sole responsibility of the
original retail purchaser.
Limitations:
- This limited warranty does not cover failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used in accordance with KGI’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an authorized dealer.
- This limited warranty terminates if you sell or otherwise transfer this product to another party.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO COUNTRY. KGI’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THIS WARRANTY. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN IMPLIED WARRANTIES OR CONDITIONS, OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU. KGI DOES NOT ACCEPT LIABILITY FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION, ANY LIABILITY FOR THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OR FOR PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM LIABILITY FOR WHICH KGI MAY BE RESPONSIBLE WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF THE CLAIM. SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WARRANTY OUTSIDE THE U.S.
The Warranty on this product shall comply with applicable law when sold to a
consumer outside of the United States. To obtain any applicable warranty
service, please contact the dealer from which you purchased this product, or
the distributor that supplied this product.
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA
Documents / Resources
|
Klipsch ProMedia Heritage 2.1 BT Speaker
Kit
[pdf] Instruction Manual
PMH21, 2ATKO-PMH21, 2ATKOPMH21, ProMedia Heritage 2.1 BT, Speaker Kit,
ProMedia Heritage 2.1 BT Speaker Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>