Tigo TS4-A-O Optimizer Module User Guide
- June 6, 2024
- Tigo
Table of Contents
Tigo TS4-A-O Optimizer Module
The TS4-A-O is
the advanced add-on solution that brings smart module functionality to
standard PV modules, including optimization, rapid shutdown, and module-level
monitoring.
Maximum power: 700W
Maximum voltage: 80VDC
Maximum current: 15ADC
Maximum system voltage 1000V / 1500V
POINTS
*Collect TS4 QR code for system mapping to enable monitoring and safety features
- PV Module –
- String –
- String +
- PV Module +
Use ANSI/NFPA 70 wiring methods.
Modules must not be installed in readily accessible locations. (Canada only)
Connectors from different manufacturers cannot be mated with each other.
Photovoltaic Rapid Shutdown Equipment NEC 690.12 and C22.1-2015 Rule 64-218
The Tigo Access Point (TAP) is a PVRSE device that provides a keep-alive
signal to the TS4 (attenuator) device via wireless communications.
The Tigo Access Point (TAP) shall be powered from the same power as the RSI
(Rapid Shutdown Initiator) circuit and tied to the shutdown of the inverter.
IMPORTANT NOTICE
Electricity will be supplied to the Tigo TS4-A output cables immediately
when connected to a PV module exposed to sunlight. Use care when handling.
INSTALLATION
STEP 1
STEP 2
STEP3
Note: When installing TS4-A, connect the input cables to the PV module
before connecting the TS4-A output cables in series.
If disconnecting TS4-A, disconnect the TS4-A output cables from the string
before disconnecting the input cables from the PV module.
For installation with frameless modules,
remove metal clips and bolt TS4-A to rail.
support.tigoenergy.com
support@tigoenergy.com
International: 00800.2255.8446 Americas: +1.408.402.0802
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>