Shenzhen Do Intelligent Technology GT01 Pro Smart Watch User Manual

GTO1 Pre Smart Watch
Operation Manual

Thanks for purchasing this product
Please read this manual carefully before use.

Quick Start

1. Know the Device

Physical Button
Press the physical button

1.  Return; or
2. Turn on the screen when the screen is off.
3. Access the function list.

Press and hold the physical button

1. 2. To turn on the device in a power-off state;
2. In the charging state, press and hold the physical button for Ss to reset the program without clearing data.

Power On/Off
Power On
When you start charging the device, it will be turned on automatically.

Note: the device must be charged and activated before the first use; Please always use the original charger to chargethedeAce.
Press and hold the physical button to turn on the device.

Power Off
Shutdown path:
(Setup]—)(Power Off].

Screen Operations a

Swipe the screen up/down

1. To switch among pages at the same level; or
2. To view long text or details.

Swipe the screen left/right |

1. To switch among pages at the same level

Click screen

1. To go to the sub-page;
2. To complete the Corresponding action, depending on which On-SCreen button is CliCked.

‘Functions

GTO1 Pro supports features such as multiple exercise modes, weather, watch face store, breath training, heart rate monitoring, sleep monitoring, stress level
monitoring, blood oxygen level detection, notifications, Call via Elluet00lh, Skin temperature monitoring, NOiSe monlioringatc. For instructions and PhDs for these functions, open the app to access the user guide for answers.

maintenance

Below are three recommendations on wearing and maintenance:

1.  Keep the device clean;
2. Keep the device dry;
3. Do not wear the device too tight.

• Do not use household cleaners to clean the device. Use soap-free cleaners instead.
• For stains that are diff quick to remove, k is commenced to scrtbvvkh alcohol Waterproof perk:mance: Pe device is not suitable for diving, swimming in the sea or sauna: It is suitable for shimming p30t, shower (cold water)and swimming in shallows.

Safety

• To prevent device failure, fire and explosion, never place the deviCe or its accessories in any extremely-high-temperature or extremely-low-temperature area.
• To prevent device damage, accessory damage, device failure, &ways to protect the device against strong impact or shock.
• DO not disassemble or modify the device and Its accessories without authorization. My device failure should be referred to our after-sales service personnel

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this tittle personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.
If you experience discomfort or skin irritation when wearing your smartwatch, then we recommend you try cleaning your device. Sometimes residue or foreign materials build up around your device and may aggravate your skin. It’s also possible that you are not wearing the watch correctly. We recommend making sure to the dean and adjust your watch regularly for a more comfortable fit.
Caution:
• If you experience skin irritation when wearing your watch, please refrain from wearing it, and wait two to three days to see if your symptoms east If symptoms persist or worsen, please consult a physician. • If you have eczema. allergies or asthma, you may be more likely to experience skin irritation or allergy from a wearable device.
CAUTION
• Risk of explosion if the battery is replaced by an Incorrect type

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
. If this equipment does cause harmful interference to radio-television reception, which can be determined by turning t equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Scan the OR code for more function information
4. SM.GTO1PRO000 V1.0
https://t.ido.ink/bErAF3

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>