Shenzhen Do Intelligent Technology GT01 Smart Watch User Manual
- June 5, 2024
- Shenzhen Do Intelligent Technology
Table of Contents
Shenzhen Do Intelligent Technology GT01 Smart Watch
Know Your Device
Physical Button
Press the physical button
- Turn off reminders in the “Reminder” interface.
- Turn on screen when screen is off.
- Return to watch face when in other interfaces. In the watch face, the Stopwatch/ Calculator/ Exercise apps run in the background while other apps stop running.
- ACcess the function list.
Press and hold the physical button
- To turn on the device in power-off state; or
- In charging state, press and hold the physical button for 5s to reset the program without clearing data.
Power On/Off
Power On
When you start charging the device, it will be turned on automatically.
Note: the device must be charged and activated before the first use; please always use the original charger to charge the device. Press and hold the physical button to turn on the device.
Power Off
Shutdown path: [Setup]>{Povwer Off.
Downloading and Pairing
Download the APP
Scan the following QR code to download “VeryFit” or search for and download
“VeryFit” in “APP Store” On your phone.
Pairing
Turn on the APP and Bluetooth. Search and select the device in the APP
Finally, bind the device in the APP
Screen Operations
Swipe the screen up/down
- To switch among pages at the same level; or
- To view long text or details.
Swipe the screen left/right
To switch among pages at the same level.
Click the screen
- TO go to the sub-page; or
- To complete the corresponding action, depending on which on-screen button is clicked.
Click and hold the screen
To change the watch face wallpaper
Functions
GTO1 Supports features such as: multiple exercise modes, Women’s health,
weather, watch face store, breath training, heart rate monitoring, sleep
monitoring, stress level monitoring, blood
Oxygen level detection, notifications, etc. For instructions and FAQs for
these functions, open the app to acces the user guide for answers.
Maintenance
Below are three recommendations on wearing and maintenance
- Keep the device clean;
- Keep the device dry;
- Do not wear the deVice too tight
Do not use household cleaners to clean the device. Use soap-free cleaners instead.
For stains that are difficult to remove, it is recommended to scrub With alcohol.
Waterproof performance: the device is not suitable for diving, swimming in the sea or sauna; it is suitable for swimming pool, shower (Cold water) and swimming in shalloWs.
Safety
To prevent device failure, fire and explosion, never place the device or its
accessories in any extremely-high-temperature or extremely-low-temperature
area.
To prevent device damage, accessory damage and device failure, always protect
the device against strong impact or shock. Do not disassemble or modify the
device or its accessories without authorization. Any device failure should be
referred to our after-sales service personnel
FCC Statement
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycle valuable raw materials and the treatment of toxic substances. if you
experience discomfort or skin irritation when wearing your smart watch, then
we recommend you try cleaning your device. Sometimes residue or foreign
materials build up around your device and may aggravate your skin. It’s also
possible that you are not wearing the watch correctly. We recommend making
sure to clean and adjust your watch regularly for a more comfortable fit.
Caution:
If you experience skin irritation when wearing your watch, please refrain from
wearing, and wait two to three days to see if your symptoms ease. If symptoms
persist or worsen, please consult a physician.
If you have eczema, allergies or asthma, you may be more likely to experience
a skin irritation or allergy from a wearable device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>