Shenzhen Do Intelligent Technology GT Band Smart Watch Band User Manual
- June 6, 2024
- Shenzhen Do Intelligent Technology
Table of Contents
Shenzhen Do Intelligent Technology GT Band Smart Watch Band
Know the Device
Functions of the Touch key:
Click the Touch key to:
- Return; or
- Turn on the screen
Power On/Off
Note: the Bracelet must be activated through charging before the first
use.
(1) Pull the strap and remove the main body of the Bracelet;
(2) Insert the metal charging terminal of the main body into the USB port to
charge the Bracelet (please use the specified voltage and current (5V /500mA)
and be careful not to reverse the polarity).
Charging and Power-on / Power Off
Shutdown path: [Setup] ➔ [Power Off].
Downloading and Pairing
Download the APP
Scan the following QR code to download “VeryFit” or search for and download “VeryFit” in “APP Store” on your phone.
Pairing
Turn on the APP and Bluetooth. Search and select the device in the APP.
Finally, bind the device in the APP .
Screen Operations
Swipe the screen up / down
- To switch among pages at the same level; or
- To view long text or details.
Swipe the screen left/right
- To switch among pages at the same level.
Click the screen
- To go to the sub-page;
- To complete the corresponding action, depending on which on-screen button is clicked.
Click and hold the screen
- To change the watch face wallpaper.
Functions
GT Band supports SATM, fu ll-screen touch, follow-hand operations, 14 sports modes, multiple dials in the cloud, and HR, Sp02, stress and sleep monitoring. For the operating instructions and FAQ, please start the APP and consult the User Guide.
Maintenance
Below are three recommendations on wearing and maintenance:
- Keep the device clean;
The device meets the EU ROHS criterion.
Please refer to IEC 62321, EU ROHS Directive 2017 /65/EU and revised
directive.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
- th is device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna;
— Increase the separation between the equipment and receiver;
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected;
— Consult the dealer or an experienced radio/TVtechnician for help.
CAUTION
— Risk of explosion if the battery is replaced by an incorrect type;
— disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can resu it in an explosion;
— leaving a battery in an extremely high temperature su rrounding environment
that can result in an explosion or the leakage of flammable liquid or gas;
— a battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal – collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
If you experience discomfort or skin irritation when wearing your smart watch, then we recommend you try clean ing your device. Sometimes residue or foreign materials bui ld up around your device and may aggravate your skin. It’s also possible that you are not wearing the watch correctly. We recommend making sure to clean and adjust your watch regu larly for a more comfortable fit.
Caution:
- If you experience skin irritation when wearing your watch, please refrain from wearing, and wait two to three days to see if your symptoms ease. If symptoms persist or worsen, please consult a physician.
- If you have eczema, allergies or asthma, you may be more likely to experience a skin irritation or allergy from a wearable device.
Scan the QR code for more function information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>