Shenzhen Do Intelligent Technology KR01 Smart Bracelet User Manual
- June 6, 2024
- Shenzhen Do Intelligent Technology
Table of Contents
Shenzhen Do Intelligent Technology KR01 Smart Bracelet User Manual
Thanks for purchasing this product.
Please read this Manual carefully before using.
Quick Start
Know the Device
Touch key functions：
- Tap the Touch key to switch between menu pages.
- Tap and hold the Touch key to confirm.
Power On/Off
Note: the Bracelet must be activated through charging before the first use.
- Connect to the charging dock.
- Connect the USB end of the charging cable to the charger.
- When the charger is plugged in, the charging icon will appear on the screen and the screen will be on for 5 seconds. When the screen is off, tap the Touch key, the charging icon will be displayed again.
Charging and turning on
Downloading and Pairing
Download the APP
Scan the following QR code to download“ VeryFit” or search for and download “VeryFit” in “APP Store”on your phone.
Pairing
Turn on the Veryfit app and activate Bluetooth connection on your phone.
Search for devices on the app, and select the corresponding device model to
pair.
Bind the device on the app.
Functions
KR01 supports IP68 waterproof, 14 exercise modes, up to 10 alarms, and
features such as cloud watch face, heart rate measurement and sleep
monitoring, etc.
Please turn on the app to access the user guide, operating instructions and
FAQ.
Maintenance
Below are three recommendations on wearing and maintenance:
- Keep the device clean;
- Keep the device dry;
- Do not wear the device too tight.
Do not use household cleaners to clean the device. Use soap-free cleaners instead.
For stains that are difficult to remove, it is recommended to scrub with alcohol
Waterproof performance: the device is not suitable for diving, swimming in the sea or sauna. it is suitable for swimming pool, shower (cold water) and swimming in shallows.
Safety
- To prevent device failure, fire and explosion, never place the device or its accessories in any extremely-high-temperature or extremely-low-temperature area.
- To prevent device damage, accessory damage and device failure, always protect the device against strong impact or shock.
- Do not disassemble or modify the device or its accessories without authorization. Please contact our after-sales service in case of a device error.
Specification
- Model: KR01
- Battery capacity: 90mAh
- Charging Time: about 2 hours
- Waterproof: IP68
- Operating Temperature: 0°C-60°C
- Product Frequency: 2402-2480MHz
- Screen Type: 0.96 ” TFT-LCD
- Charging Voltage: 5V±0.2V
- Battery Life: 7 Days
- Weight of Product: 18.1g
- Bluetooth Version: BLE4.2
- Max. transmission Power Consumption: 4dBm
The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
- Consult the dealer or an experienced radio/TV technician for help
CAUTION
- Risk of explosion if the battery is replaced by an incorrect type;
- disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
- a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
If you experience discomfort or skin irritation when wearing your smart watch, then we recommend you try cleaning your device. Sometimes residue or foreign materials build up around your device and may aggravate your skin. It’s also possible that you are not wearing the watch correctly. We recommend making sure to clean and adjust your watch regularly for a more comfortable fit.
Caution
- If you experience skin irritation when wearing your watch, please refrain from wearing, and wait two to three days to see if your symptoms ease. If symptoms persist or worsen, please consult a physician.
- If you have eczema, allergies or asthma, you may be more likely to experience a skin irritation or allergy from a wearable device.
Scan the QR code for more function information
4.SM.KR01XXX000 V1.0
This number is for internal use only