Shenzhen DO Intelligent Technology Co Ltd IDW16 Smart Watch User Manual
- June 9, 2024
- Shenzhen DO Intelligent Technology Co Ltd
Table of Contents
DO Intelligent Technology Co Ltd IDW16 Smart Watch
User Manual IDW16 Smart Watch Operation Manual
Thanks for purchasing this product.
Please read this Manual carefully before use.
Model | IDW16 | Screen Type | color 1.95 -inch screen |
---|---|---|---|
Battery capacity | 3.8V/300mAh | Charging Voltage | 5V±0.2V |
Charging Time | 2.5hours | Battery Life | 7Day |
Waterproof levet | IP68 | Weight of Product | 41.5g |
Operating Temperature | 0°C-60°C | Bluetooth Version | BLE5.3 |
Product Frequency | 2402-2480MHz | Max. transmission Power consumption | 4dBm |
Product overview
Physical button operation
Short press
- To return.
- To wake the screen when it is off.
Long press
- To turn on the watch.
- Under the power on state, long press for 8s to restart.
Turning on/off
Turning on
Whilst the watch is off, it automatically turns on when you put it on charge.
Note: Charge the
watch to activate it before first use. The original power adapter must be used
for charging.
Long press the button to turn on the watch.
Turning off
To turn off the watch: go to Settings -> Turning off menu.
App downloads and pairing
-
App downloads
Download and install the”vefyFit” app on the App Store, Google Play or by scanning the QR code below. -
Pairing
Turn on VeryFit app -> Activate Bluetooth connection on your phone -> Search on the app for the device to pair with (or scan the QR code on the device) -> Finish binding on the app (or on the device).
Screen operation
Swipe up/down
- To toggle through menu.
- To view long text/details.
Swipe left/right
- To toggle through menu.
Tap the screen
- To enter the menu.
- To operate according to the prompts.
Tap and hold on the screen
- To switch between watch faces.
Features
IDW16 has features such as IP68 water resistance, ultra-long battery life, full-screen touch control, low latency, 100 workout modes and multiple cloud watch faces. It supports heart rate monitoring and stress detection throughout the day, blood oxygen detection and sleep monitoring, etc. For operating instructions and FAQs on these features, please turn on the app and go to “User Guide” section.
Care and maintenance
Three suggestions for use and maintenance:
- Keep the product clean;
- Keep the product dry;
- Do not wear the product too tight
- Do not use household cleansers when cleaning the product Use soap-free cleansers instead.
- For stubborn stains, it is recommended to remove byscrubbing with alcohol.
Waterproof: NOt suitable for usewhile diving, swimming in the sea, Or in a sauna. Suitable for use in swimming pools, showers (cold water) and shallows.
Safty instructions
- Do not place the product and its accessories at extreme temperatures, otherwise it may cause hazards such as product failure, fire or explosion.
- Protect the product from strong impacts or jolts, so as not to damage the product and its accessories, thus avoiding product failures.
- Do not disassemble or modify the product and its accessories by yourself. Contact us for after-sales service when the product fails.
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could avoid the users authority to operate the equipment.
This equipment has been tested and found to comptywith the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consultthe dealer or an experienced radio/1V technician for help.
CAUTION
The device has been evaluated to meet general RF exposure statement. The
device can be used in portable exposure condition without restriction
– Risk of explosion if the battery is replaced by an incorrect type;
– disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid orvs;
– a battery subjected to extreme low air pressure that may result in an
explosion or the leakage o flammable liquid or gas.
**** Old electrical appliances must not be disposed of together with the
residual waste, but have to be disposed of separately. The disposal at the
communal collecting point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these collecting points
or to similar collection point. With this little personal effort, you
contribute to recycle valuable raw materials and the treatment of toxic
substances.
If you experience discomfort or skin irritation when wearing your smart watch,
then we recommend you try cleaning your device. Sometimes residue or foreign
materials build up around your device and may aggravate your skin. It’s also
possible that you are not wearing the watch correctly. We recommend making
sure to clean and adjust your watch regularly for a more comfortable fit.
Caution:
- If you experience skin irritation when wearing your watch, please refrain from wearing, and wait two to three days to see if your symptoms ease. If symptoms persist or worsen, please consult a physician.
- If you have eczema, allergies or asthma, you may be more likely to experience a skin irritation or allergy from a wearable device.
Wear and Care
Some users may experience skin irritation when using this product. To reduce
the potential for irritation,please follow four simple wear and care tips: (1)
keep it clean; (2) keep it dry; (3) do not wear it too tightly, and keep the
wearing gap as one finger; (4) after long-term wearing, remove the device in
time to relax the wrist; (5) after exercise, if your wrists sweat, please
clean and dry your wrists and watches before wearing again. The residual sweat
components will corrode the watch. It is recommended to regularly use soap or
hand sanitizer to clean the watch. In case of skin allergy, please take off
your watch and Seek medical advice in time.
This device contains licence-exempt transmitters)/receiver(s) that complywith
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference. (2)This device must accept any interference, including
interference that may cause undesired operation of the device.
Do not attach the magnetic part of the charging cable to other metals to avoid
short-circuiting the contacts of the charging cable.
Scan the QR code for more function information4.SM.IDW16XX000V1.0 This number is for internal use only
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>