DYNAUDIO RCU2 BT Remote Control User Guide

BT Remote Control RCU2

Quick Start Guide

About this guide

Used expressions and symbols

In this guide, the following signs and symbols are used:
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

WARNING
Indicates in combination with a safety sign a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Important safety instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.
   USA and Canada only: A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle.

16. The mains plug or the appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

17. No naked flame sources, such as lighted candles, should be placed on the apparatus.

18. This apparatus shall be connected to a mains socket outlet with a protective earthing connection.

19. The use of this apparatus is not allowed in tropical climates.

CAUTION

Operating temperature
This product is intended for use at home or in an office with a maximum ambient temperature of 40° C (104° F). Avoid exposure to direct strong sunlight and / or radiation from heat sources.

WARNING
To reduce the risk of fire or electric shock, this apparatus shall not be exposed to rain or moisture, dripping or splashing and objects filled with liquids, such as vases, should not be placed on this apparatus.

WARNING
Never place a loudspeaker in an unstable location. A loudspeaker may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using stands recommended by the manufacturer of the loudspeaker.
• Only using furniture that can safely support the loudspeaker.
• Ensuring the loudspeaker is not overhanging the edge of the supporting furniture.
• Not placing the loudspeaker on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the loudspeaker to a suitable support.
• Not placing cloth or other smooth materials between the loudspeaker and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the loudspeaker or its controls.

If the existing loudspeaker is going to be retained and relocated, the same considerations as above should be applied.

WARNING
RISK OF ELECTRIC SHOCK! DO NOT OPEN!

• To reduce the risk of electric shock, do not remove the back panel and do not expose the apparatus to rain or moisture.
• No user serviceable parts inside. Refer servicing to qualified personnel.

FCC / IC NOTICE (ELECTROMAGNETIC COMPATIBILITY)

This device complies with Part 15 of the FCC Rules / Industry Canada licence- exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

CAUTION
Hot rear surface
When playing at maximum volume for more than 1 hour the rear surface of the speaker can get hot. Wait 30 minutes after switching off before handling the speakers

RF Exposure Information

Maximum Permissible Exposure (MPE) Requirements
This device meets the EU requirements and the International Commission on Non- Ionising Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. To comply with the RF exposure requirements, this equipment must be operated in a minimum of 20 cm separation distance to the user.

To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

Region Selection
Limited by local law regulations, this product does not have region selection option.

Radio Frequency (RF) bands and maximum EIRP

WLAN Device (5G band)

1. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
2. The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the EIRP limits specified for point-to-point and non point-to-point operation as appropriate.

Radio Frequency Band and Power Information
Hereby, Dynaudio A/S declares that the product accompanied by these safety instructions is in compliance with Radio Equipment Directive 2014/53/EU.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range for member states: AT, BE, BG, CZ, DK, EE, FR, DE, IS, IE, IT, EL, ES, CY, LV, LI, LT, LU, HU, MT, NL, NO, PL, PT, RO, SI, SK, TR, FI, SE, CH, UK, HR.

High sound pressure levels

To prevent possible hearing damage, do not listen at high volume levels for long periods

Unpacking

After unpacking, make sure the system is complete and check the device and all accessories for transport damage. Transport damage may be expected if the packaging is already severely harmed. Do not attempt to start up a damaged device. If the contents are incomplete or damaged, please contact your Dynaudio distributor. Distributor addresses can be found on the Internet at dynaudio.com.

Removing the protection cap

The tweeter is protected by a cap to prevent damage during transport and unpacking.
After you have unpacked the speaker, remove the cap by just pulling it straight out.

Packaging material
The packaging has been designed so that it may be reused as long as it has not been damaged during transport. Keep the packaging and use the original packaging for all further transport.

Correct disposal of this product

This marking on the product, accessories, packaging or literature indicates that the product and its electronic accessories should not be disposed of with other household waste as stated in the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The crossed-out bin symbol is printed on all products as a reminder.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The recycling of materials helps to conserve natural resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Waste may be taken to special collection sites or can be delivered free of charge to the dealer when purchasing a new equivalent or without obligation to make a new purchase for equipment smaller than 25 cm.

Limited Warranty

Dynaudio warrants this product to be free from defects in materials and workmanship under conditions of normal use and service for a limited period from the date of original purchase. For this warranty to apply, the unit must be installed and used according to its written instructions.

The obligation under this warranty shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that:

1. inspection by Dynaudio indicates the validity of the claim;
2. the defect is not the result of damage, misuse, lightning, power surges, negligence, improper operation (installation) or failure to follow instructions contained in the manual or written instructions provided by Dynaudio after the  original purchase;
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus parts and labour will be applied to units defaced or physically damaged);
4. the dealer from whom the Dynaudio products were purchased was authorized to sell such products at the time of the original purchase;
5. the service provider for, including but not limited, installation or repair of the product, was authorized in writing by Dynaudio;
6. the original, dated Bill of Sale is presented whenever service is required during the warranty period;
7. freight charges for the return of products to Dynaudio are prepaid;
8. all units “out of warranty” are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to additional charges for parts and labour).

This warranty is in lieu of and excludes all other warranties, expressed or implied.

Neither this warranty nor any other warranty, express or implied, including implied warranties of merchantability and fitness, shall extend beyond the warranty period.

Dynaudio shall not be liable for damages to any other equipment or other items at the site of use, or any other damages whether incidental, consequential or otherwise.

Dynaudio shall not be liable for any anticipated profits, any incidental or consequential damages, loss of time or other losses incurred by the purchaser in connection with the purchase, operation or use of the product.

The information this document contains is subject to change without notice. In the event that there are differences between this warranty and the provisions of any advertisements, documentation, product brochures or packaging cartons, the terms of this warranty shall prevail.

CE declaration of conformity
The CE declaration of conformity can be found online:
www.dynaudio.com/support/ce-conformity

Manufacturer Contact Address
Dynaudio A/S, Sverigesvej 15, 8660 Skanderborg, Denmark.
www.dynaudio.com

Warranty extension

To extend the warranty on your Dynaudio loudspeakers, please register your speakers online at www.register.dynaudio.com or contact your dealer for assistance. (Note: The extended warranty period is limited on active speakers and subwoofers.)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>