MSR Elixir 2 Tent Installation Guide
- June 7, 2024
- MSR
Table of Contents
MSR Elixir 2 Tent Installation Guide
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, stakes, MSR® Footprint
1. PREPARE FOR SETUP
- Spread tent out and stake out four corners tightly.
- Assemble poles.
2. ASSEMBLE TENT
- Insert each red pole tip of main poles into grommets on the stake loops with red webbing.
- Insert each gray pole tip of main poles into grommets on the stake loops with gray webbing.
- Attach color-coded clips to like-color pole along entire length of frame assembly.
3. ATTACH RIDGE POLE
- Insert red ridge pole into red grommets above doors, making sure ridge pole rests on top of both red and gray main poles.
4 .ATTACH RAINFLY
- Lay rainfly over tent. Attach rainfly’s midpoint grommets to ridge pole.
- Clip and tighten all buckles at all stake loops, connecting red webbing with red stake loops, gray webbing with gray stake loops.
- Stretch out vestibules until taut and stake down, making sure seams align with frame.
USE TIPS:
All tents require staking; unsecured tents are susceptible to wind damage. In
some conditions, additional stakes and cord may be required. Re-adjustment of
stakes and rainfly may be
necessary to keep tent tight and weatherproof. For complete care and use
instructions, refer to the Owner’s Manual (available at
www.msrgear.com/Elixir2).
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Loading......