YI 365474 Pro Home Camera User Guide
- June 6, 2024
- YI
Table of Contents
User Manual
Thank you for choosing the VI Home 2K Pro Camera
What’s in the box
Get to know the Camera
Note: To enable local recording of video CliP, please insert a MicroSD
card* (not included) to the slot as shown below.
Pairing Your Camera
Prerequisite:
Ensure that your cell phone is connected to a 2.4 GHz VVi-Fi network.
- Download the VI Home app from the Apple App Store or Google Play.
- Register a VI account or log on to an existing VI account.
Step 1
Connect the power adapter to an outlet to activate the camera. The camera
indicator will flash red and you will hear the introductory message “Welcome
to VI home”, followed by “Waiting to connect”. When you hear “waiting to
connect”, tap “I heard waiting to connect”.
Note: To install a camera that was previously installed on a different
network or if you change your password, you must reset your camera.
Step 2
Log in to the VI Home App, you can tap the “+” sign to select your device
or scan the camera’s OR code with your phone.
Step 3
Enter the password of the same Wi-Fi network that is connected to your phone,
then use the VI Home 2K Pro Camera to scan the OR code that will be generated.
Step 4
Tap ‘Next Step”. You will hear Pairing is successful” and then the 11 Home
2K Pro Camera is ready to use.
Reset Wi-Fi Networks
When you need to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:
- Restore your camera to its default settings by pressing the reset button.
- Open the VI Home app on your phone, and connect the camera to your phone again. Your videos stored on your micrc6D card will not be affected.
Specifications
Max Resolution: 2304 x 1296p (3AP)
Lens: Wide-Angle
Audio : Built-in Microphone and Speaker
Alert Modes: Face Detection. Human Detection. Motion Detection.
Sound Detection, CustomizedActivity Zone Alert
Wi-Fi: 802.11b/g/n, 2.4GHz
Support: Android. OS, PC & Mac
Power Supply: 5V 1A
Power Consumption: 3.5 W ( Max )
Operating Temperature: -10°C to 50°C (14°F to 122°F )
FCC COMPLIANCE STATEMENT:
This device complies with pan 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference.
and (2) this device must accept any interference received. including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The distance between user and products should be no less than 20cm
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates. uses and can radiate radio
frequency energy and. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However.
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more
of the fcacrenng measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
—Consult the dealer or an experienced radio TV technician for help.
IC WARNING
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference.
including interference that may cause undesired operation of the device
The distance between user and products should be no less than 20cm
Operating conditions:
Temperature: Or -40t
Humidity:10%-90%RH
Manufacturer: Yi Technology Co., Ltd
Address: Building 18, NO 55, Chuanhe Road, Shanghai China
Email: supportus@yitechnology.com (North
America)
support-eu@yitechnology.com (Europe &
UK)
supportasia@yitechnology.com (Asia
Pacific)
support@yitechnology.com (others)
Website: www.yitechnology.com
https://www.yitechnology.com/legal/privacy-policy
FCC ID: 2AFIB-YYS62121
IC: 20436-YYS62121
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>