Shark RV750EU Robot Vacuum Cleaner Instructions

RV750EU Robot Vacuum Cleaner
Instructions Manual

sharkclean.eu

WHAT’S INCLUDED IN THE BOX

1. Shark® ION Robot Vacuum Cleaner
2. Shark® Charging Dock
3. Two packs of Side Brushes (2x spare brushes)
4. BotBoundary Strip Pack

STEP 1: DOWNLOAD THE SHARKCLEAN APP
Using your Smartphone.
STEP 2: REGISTER YOUR PURCHASE
Use the SharkClean App to register your Shark® ION Robot. Enter the model and serial numbers.
STEP 3: GET STARTED
For easy set-up follow the steps in the Quick Start Guide. Additional product information can be found in this document to help with setup and troubleshooting.
NOTE: Your Robot will speak English during set-up. Once you connect your phone to the Robot, the language of your Robot will change to the same language in your phone settings.

PLEASE READ IT CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.

This instruction manual is designed to help you get a complete understanding of your new Shark® ION Robot Vacuum Cleaner.
For more information about your new Shark® ION Robot Vacuum Cleaner, please visit Sharkclean.eu

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmentally safe recycling.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into an outlet or try to modify to fit.

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE:
CHILDREN OR ANIMALS SHOULD NOT BE LEFT UNATTENDED IN ANY ROOMS THAT THE ROBOTIC VACUUM HAS ACCESS TO DURING  CLEANING.

GENERAL USE

1. A robotic vacuum cleaner consists of a robotic vacuum and charging dock with a power supply. These components contain electrical connections, electrical wiring,
   and moving parts that potentially present risk to the user.

2. Before each use, carefully inspect all parts for any damage. If a part is damaged, discontinue use.

3. Use only identical replacement parts.

4. This robotic vacuum cleaner contains no serviceable parts.

5. Use only as described in this manual.
   DO NOT use the robotic vacuum cleaner for any purpose other than those described in this manual.

6. DO NOT expose any parts of the robotic vacuum cleaner to water or other liquids.
   USE WARNINGS

7. This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
   Cleaning and user maintenance should not be made by children.
   a) Children should not play with the appliance.
   b) Cleaning and user maintenance should not be conducted by children without supervision.

8. Always turn off the robotic vacuum cleaner before inserting or removing the filter or dust bin.

9. DO NOT handle plug, charging dock, charging cable, or robotic vacuum cleaner with wet hands.

10. DO NOT use without a dust bin and filters in place.

11. Only use Shark® branded filters and accessories. Failure to do so may void the Guarantee.

12. DO NOT damage the charging cord:
    a) DO NOT pull or carry the charging dock by the cord or use the cord as a handle.
    b) DO NOT unplug by pulling on the cord.
    Grasp the plug, not the cord.
    c) DO NOT close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.

13. DO NOT put any objects into nozzle or accessory openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

14. DO NOT use if robotic vacuum cleaner airflow is restricted. If the air paths become blocked, turn the vacuum cleaner off and remove all obstructions before turning on the unit again.

15. Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing.

16. DO NOT use if robotic vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.

17. DO NOT place vacuum cleaner on unstable surfaces.

18. DO NOT use to pick up:
    a) Liquids.
    b) Large objects.
    c) Hard or sharp objects (glass, nails, screws, or coins).
    d) Large quantities of dust (drywall dust, fireplace ash, or embers). DO NOT use as an attachment to power tools for dust collection.
    e) Smoking or burning objects (hot coals, cigarette butts, or matches).
    f) Flammable or combustible materials (lighter fluid, gasoline, or kerosene).
    g) Toxic materials (chlorine bleach, ammonia, or drain cleaner).

19. DO NOT use in the following areas:
    a) Wet or damp surfaces.
    b) Outdoor areas.
    c) Do not use in an area with a space heater.
    d) Spaces that are enclosed and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or
    flammable dust).
    e) Near fireplaces with unobstructed entrances.

20. Turn off the robotic vacuum cleaner before any adjustment, cleaning, maintenance or troubleshooting.

21. DO NOT modify or attempt to repair the robotic vacuum cleaner or the battery yourself, except as indicated in this manual. DO NOT use the vacuum if it has been modified or damaged.
    BATTERY USE

22. The battery is the power source for the vacuum. Carefully read and follow all charging instructions.

23. To prevent unintentional starting, ensure the vacuum is powered off before picking up or carrying the vacuum. DO NOT carry the appliance with your finger on the power switch.

24. Use ONLY the Shark® charging dock XDOCKRV750EU and use only battery RVBAT850. The use of batteries or battery chargers other than those indicated may create a risk of fire.

25. Keep the battery away from all metal objects such as paper clips, coins, keys, nails, or screws. Shorting the battery terminals together increases the risk of fire or burns.

26. If the battery is damaged, liquids may be ejected from the battery. Avoid contact with this liquid, as it may cause irritation or burns. If contact occurs, flush with water. If liquid contacts the eyes seek medical help.

27. a robotic vacuum cleaner should not be stored, charged, or used at temperatures below 10°C (50°F) or above 40°C (104°F). Ensure the battery and vacuum have reached room temperature before charging or use. Exposing the Robot or battery to temperatures outside of this range may damage the battery and increase the risk of fire.

28. DO NOT expose the robotic vacuum cleaner or battery to fire or temperatures above 130°C (265°F) as it may cause an explosion.

SAVE THESE INSTRUCTIONS

QUICK START GUIDE

2 WAYS TO CLEAN

1. WITH the SharkClean App.
   Download the SharkClean App using an Android or IOS smartphone.

2. WITHOUT the SharkClean App.
   By simply pressing the Clean or Dock button on the Robot.

SECTION A – PREPARING THE ROBOT

STEP 1 Locate the brushes which are stored in the
box (4 brushes supplied).| STEP 2 Firmly press two brushes onto the square pegs. Save the
remaining brushes for future use.| STEP 3 Switch on the Robot.

SECTION B – PREPARING THE CHARGING DOCK

STEP 1 Find a permanent location for the Charging Dock, with its back
against a wall, in an area with a good Wi-Fi signal. For best results, set up
Charging Dock on a hard floor.
The space surrounding the Charging
The dock is only a guide. The Robot will
often operate in smaller spaces, but it is recommended to give the
Robot a wide space to dock more easily.| STEP 2 Plug in the Charging Dock.| STEP 3 Place the Robot on the
Charging Dock to charge. You will
hear a beep when charging begins
and the light on the side of the
The Charging Dock will change from green
to blue.

SECTION C – SETTING UP THE APP

STEP 1 – DOWNLOAD THE SHARKCLEAN APP

Search SHARKCLEAN using your smartphone

STEP 2 – CREATE AN ACCOUNT

STEP 3 – CONNECT YOUR ROBOT TO WI-FI

1. ADD A Robot: Click on the Menu icon in the App and ‘Add a Robot’
2. GET STARTED: Click on ‘Get Started’ and have your WI-Fl password to hand.
3. POWER ON: Switches on the Shark’ ION Robot by turning the on/off switch to the ‘on’ position (located on the side of the Robot). Press ‘continue’ in the App.
4. LOCATION: Position the Charging Dock Base on a flat surface with 1m on either side and 1.6m clearance in front. Then plug into the mains power.
5. PAIRING: Pair your phone to the Shark` ION Robot by pressing the left and right buttons on your Shark° ION Robot.
6. WI-FI: Select `SharkXXXXXXXXXX’ in your WI-Fl settings and then return to the SharkClean App. In the SharkClean App proceed to connect your Shark° ION Robot to WI-Fl by entering your WI-Fl password.
7. CONNECTED: Wait 1-2 mins for your Shark° ION Robot to connect to WI-Fl.

STEP 4 – SCHEDULED CLEANING

STEP 5 – CONTROLLING THE ROBOT

NOTE: Due to development changes the images shown here may differ from the actual app.

SECTION D – PREPARING YOUR HOME

STEP 1 Clear cords and remove small objects, clothing, or curtains from floors to prevent tangling.
STEP 2 Open all the interior doors in your home so that your Robot can access and clean your home without obstruction.

STEP 3 Use the BotBoundary strip included in the box to keep your Robot out of the areas you would like it to avoid:

• Near power cords or chargers, around pet bowls, and near TV cables that might cause tangles.

WHAT TO EXPECT

You can set up a schedule to clean your whole home using the app.

While your Robot is cleaning, do not pick it up and move it, or move the charging Base—this could impact the Robot’s ability to map your home.

During the first few weeks, your Robot will empty more often than usual.

Run your Robot in well-lit conditions. If you are running your Robot at night, make sure to turn on the lights.

Use the BotBoundary strip supplied in the box to create ‘no-go’ areas. Simply cut the BotBoundary strip to size and place in front of areas where you want the Robot to avoid.

GETTING TO KNOW YOUR SHARK® ION ROBOT

|
---|---

GETTING TO KNOW YOUR SHARK® ION ROBOT

BOTBOUNDARY STRIP

With Auto-Sense Navigation, your Robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it cleans. The Robot may gently bump into obstructions or linger in one spot, and it may not cover every area in a single cleaning. For best results, prepare your home as indicated below, and schedule a daily clean to ensure all floor areas are regularly maintained.

STEP 1 Clear cords and remove small objects, clothing, or curtains from floors to prevent tangling.
STEP 2 Open all the interior doors in your home so that your Robot can access and clean your home without obstruction.

To prevent your Robot from becoming trapped under furniture, use BotBoundary Strip.

Your Robot may have some trouble clearing some high thresholds. Block off high thresholds with the BotBoundary strip.

If your robot roams too far, it could have trouble finding the Charging Dock. It may be helpful to block off part of your home with the BotBoundary strip.

DOCK SET-UP

INSTALLING THE SIDE BRUSHES

Attach the two Side Brushes (included) onto the square pegs on the bottom of the Robot. There is an additional spare set included in the box.

Firmly press two brushes onto the square pegs. Save the remaining brushes for future use.

CHARGING DOCK SET-UP

• Choose a level surface in a central area.
• Remove any objects that are closer than 1m from either side of the dock, or closer than 1.6m from the front of the dock.
• Place the dock with its back against the wall, then plug it into a socket.
• The indicator light on the dock will illuminate green when the dock has power.
• The dock must be plugged in continuously for the Robot to find it.

The space surrounding the charging dock is only a guide. The Robot will often operate in smaller spaces, but it is recommended to give the Robot a wide space to allow it to dock more easily.

CHARGING THE SHARK® ION ROBOT

CHARGING

IMPORTANT: The Shark® ION Robot has a pre-installed rechargeable battery. The battery must be fully charged before using your Robot. It may take up to 5 hours to fully charge for the first time.

To charge, the Power button on the side of the Robomust be in the ON position (I).

If the Robot has no charge and cannot return to the charging dock, place it on the dock manually and charge for up to 5 hours.

When the cleaning cycle is complete, or if the battery is running low, the Robot will search for the dock. If your Robot doesn’t return to the dock, its charge may have run out.

CHARGING THE SHARK® ION ROBOT

CHARGE INDICATOR LIGHTS

• The blue charge indicator lights show how much charge is remaining.
• While the Robot is charging, all three blue LED lights will cycle. When charging is complete, all three blue lights will illuminate steadily.
• If the Robot is idle and away from the charging dock for 10 minutes, it will enter Sleep Mode, and the lights will turn off.
• If all the indicator lights are off, then the Robot is in Sleep Mode, the power switch is turned OFF (O) or there is no charge remaining. Turn the power switch ON (I). Press any button to ensure the Robot is not in Sleep Mode. If all indicator lights remain off, there is no charge. Place the Robot on the dock, leaving a  2cm space between the front of the Robot and the face of the dock. When the Robot is docked correctly and begins to charge, it will beep and the charge indicator lights will cycle.

NOTE: If the low charge light is blinking red, there is not enough charge for the Robot to return to the dock. Manually place the Robot on the dock, leaving a 2cm space between the front of the Robot and the face of the dock.
Turn off the power switch if the Robot is not going to be used for a long period of time, this will help preserve the battery.

USING THE SHARK® ION ROBOT

MANUAL CLEANING MODE

To manually start a cleaning cycle:
Step 1: Press the Clean button on the Robot.
Step 2: Press the Dock button to stop the Robot before it finishes cleaning and automatically returns to the Base.

IMPORTANT: Before cleaning an entire room for the first time, we recommend that you first test your Robot on a small section of the floor to ensure there is no scratching.

USING THE SHARK® ION ROBOT

BUTTONS AND INDICATOR LIGHTS

CLEAN BUTTON
Press to begin a long-running cleaning session. Press again to stop.

DOCK BUTTON
Press to stop cleaning and send the robot back to the charging dock.

MAX MODE BUTTON
Press for more powerful cleaning. Max

CHARGE INDICATOR
Displays the amount of charge remaining in the battery.

“!” ERROR INDICATOR
See the Troubleshooting section for a full list of error codes.

WI-FI INDICATOR
Blue light: connected to Wi-Fi.
Red light: not connected.
Flashing blue: Set-up mode.
No light: not set up yet.

USING THE SHARK® ION ROBOT

BotBoundary Strip

To keep your Robot away from certain areas, such as pet bowls, fragile objects, wires, or doorways, use the BotBoundary strip to quickly and easily create “no-go zones”.

Identify areas or objects you want the Robot to avoid.

Generally, bot boundary strips are not needed on stairs because your Robot’s cliff sensors will prevent it from falling off ledges. For your Robot’s cliff sensors to work properly,  all runners, rugs, or carpets must be at least 20cm from any stairs (or extend over the edge of the stairs.)
If a runner, rug, or carpet edge is less than 20cm from the stairs and can’t be moved, use a BotBoundary strip to block off the stairs.

Cut the BotBoundary strip to the desired length (45cm minimum) so that it spans the length of the doorway or object you want to block off.

Use the BotBoundary strip supplied in the box to create ‘no-go’ areas. Simply cut the BotBoundary strip to size and place in front of areas that you want the Robot to avoid.

NOTE: To prevent bumping, place a strip at least 5cm in front of the object you want to block off.

THE SHARKCLEAN APP

DOWNLOAD THE APP

Download the SharkClean App using an Android or IOS smartphone,

CREATE AN ACCOUNT

Step 1: Enter your email address.
Step 2: Enter a password.
Step 3: Confirm your email.
Step 4: Sign in to the SharkClean App with your email and password.

ADD A ROBOT

Step 1: Click on the menu button in the SharkClean App and ‘Add a Robot’.
Step 2: Click on ‘Get Started’.
Step 3: Switch your Robot into the ‘ON’ position.
Step 4: Find a good home for your Robot Charging Dock.
Step 5: Pair your phone to the Shark® ION Robot by pressing the left and right buttons on your Shark® ION Robot.
Step 6: Select ‘SharkXXXXXXXXXXX’ in your WI-FI settings, and then return to the SharkClean App.
Step 7: Select your WI-FI network and enter your WI-FI password.
Step 8: Wait 1-2 mins for your Shark® ION Robot to connect to WI-FI.
Step 9: Start cleaning!

WI-FI TROUBLESHOOTING

To use the App, your phone must be connected to a 2.4GHz network.

• The App will only work on a 2.4GHz network.
• Typical home Wi-Fi networks support both 2.4GHz and 5GHz.
• Do not use a VPN or a proxy server.
• Make sure Wi-Fi isolation is turned off on the router.
• For technical support please visit sharkclean.eu

again
! + Wi-Fi (Flashing RED alternately)| Wrong user name or password for your Shark account
! + Wi-Fi (Flashing RED at the same time)| Cannot connect to Wi-Fi

NOTE: To prevent bumping, place a strip at least 5cm in front of the object you want to block off.

MAINTENANCE

CAUTION: Turn off power before performing any maintenance.

Empty dust bin after each use. Press the Dust Bin Release Button and slide out the dust bin.

Empty the debris into your household dust bin.

To open the dust bin lid, press and hold the button while lifting the lid, using the finger slots.

CLEANING AND REPLACING THE FILTER

Regularly clean the filter inside the Robot’s dust bin.
For replacement filters and parts please visitsharkclean.eu

Remove and empty the dust bin. Clean any hair or debris off the comb on the back of the dust bin.

Pull the filter out of the dust bin by the tabs.

Lightly tap the filter to remove dust and debris.
IMPORTANT: Do NOT use water when cleaning the filter.

Reinsert the filter into the Robot dust bin and slide the dust bin back into the Robot.

CLEANING THE MULTI-SURFACE BRUSH-ROLL

The brush roll needs occasional maintenance.
Replace brush-roll when visibly worn. See sharkclean.eu for replacement parts.

Push up on the tabs on the brush-roll access door, then lift off the door.

Lift out the brush roll.

Remove the blue cap on the end of the brush roll.
Do not let the metal cylinder inside the cap fall out.
Clean off any hair or debris, then replace the cap. Clean the brush roll whenever hair appears.

Reinstall the brush roll, inserting the flat end first.
Close the brush-roll access door and press down until it clicks into place.

NOTE: If the metal cylinder falls out of the brush-roll cap, reinsert it in the hole on the inside of the cap.
When cutting away debris, be sure not to cut the brush roll or any other parts of the Robot

CLEANING THE SENSORS AND CHARGING PADS

CLEAN SENSORS AND CHARGING PADS AS NEEDED. Clean with a dry cloth or cleaning brush.
Gently dust off the sensors and pads located on the bottom of the Robot.

IMPORTANT: The Robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when they are dirty. For best results, clean sensors regularly.

CLEANING THE SIDE BRUSHES

Carefully unwind and remove any string or hair wrapped around brushes.
Gently wipe brushes with a damp cloth.

NOTE: Remove any side brushes that are bent or damaged. To remove a brush, lift it off its peg. See Installing the Side Brushes for instructions on how to attach and remove the brushes.
NOTE: Cloth is not included

CLEANING THE WHEELS

REMOVE AND CLEAN THE FRONT WHEEL REGULARLY.
See sharkclean.eu for replacement parts.

Pull the Front Caster Wheel from its housing and remove any debris buildup.

Clean the wheel housing, then reinsert the caster wheel.

NOTE: Leverage may be required to remove the wheel.
NOTE: Brush not included.

Clean the drive wheel housing when needed by rotating the wheel while dusting.

REPLACING THE BATTERY

To remove the battery, turn the unit over and unscrew the battery cover with a screwdriver.

Unplug the old battery from its connector, then plug in the new battery. Replace battery cover and screw it back into place.

NOTE: This appliance contains batteries that are only replaceable by skilled persons.
NOTE: Screwdriver is not included.

PARTS AND ACCESSORIES

TROUBLESHOOTING

If any error lights are illuminated or flashing on your Shark® ION Robot, see the error code chart below:

der Akku leer sein. SteIlen Sie den Netzschalter auf die Position ON. Falls keine Reaktion erfolgt, platzieren Sie den Robot zum Aufladen auf dem Dock.
REINIGUNG (ROT) I blinken gleichzeitig| ANSAUGFEHLER| Ausfall des Saugrnotors. Verstopfungen beseitigen und Filter reinigen. Staubbehalter entfernen und sicherstellen. dass die Saugkraft nicht verstopft bzw. blockiert ist.
REINIGUNG (ROD blinkt| ROBOT STECKT AN EINEM HINDERNIS FEST| Robot steckt moglicherweise an einem Hindernis fest. Bewegen Sie den Robot an einen neuen Ort auf einer ebenen Flache.
MAX blinkt| ROBOT ODER STOSSFANGER STECKT FEST| Robot steckt moglicherweise an einem Hindernis fest. Bewegen Sie den Robot an einen neuen Ort auf einer ebenen Flache.
Der FrontstoBfanger ist moglicherweise eingeklemmt. OberprOfen Sie den StoBfanger.
DOCK blinkt| BOTBOUNDARYSENSORFEHLER| Die BotBoundary-Sensoren des Robots melden einen Fehler.
REINIGUNG (ROT) + DOCK blinken gleichzeitig| ABGRUNDSENSOR- FEHLER| Die Abgrundsensoren melden einen Fehler.
Wischen Sie die Abgrundsensoren mit einem sauberen Tuch ab.
Robot kann aufgrund eines Fehlers nicht starters. Schalten Sie den Netzschalter an der Seite des Robots aus. warten Sie funf Sekunden und schalten Sie ihn dann wieder ein. Stellen Sie sicher, dass sich Ihr Robot auf einer ebenen Flache ohne Hindernisse befindet.
REINIGUNG (ROT) MAX blinken gleichzeitig| STAUBBEHALTER OFFEN/FEHLT| Der Staubbehalter wurde entfernt und muss wieder eingesetzt werden.
MAX • ! blinken gleichzeitig| SEITENBURSTENFEHLER| Eine SeitenbOrste steckt fest. Schmutzablagerungen von den SeitenbOrsten entfernen.
REINIGUNG (ROT) + MAX – !blinken gleichzeitig| RAD KLEMMT| Ein Rad klemmt. Entfemen Sie Schmutzablagerungen vom Rad.
DOCK + MAX + 1 blinken gleichzeitig| BURSTENROLLE KLEMMT| Die BOrstenrolle ist verstopft. Entfernen Sie die Ursache.
DOCK + I blinken gleichzeitig| FEHLER BEIM ANDOCKEN| Vergewissern Sie sich. dass Sie das Dock verwenden. das im Lieferumfang des Robot enthalten war.
REINIGEN (BLAU) + MAX + I blinken gleichzeitig| ROBOT AN HINDERNIS ROBOT| Der Robot steckt in einem engen Raum oder an einem Hindernis fest.
Etwas steckt im Frontstonfanger des Robots fest.
Sie den StoBfanger von Hindernissen oder Schmutzablagerungen. DrOcken Sie den StoBfanger vorsichtig nach oben und unten. vor und zuruck und stellen Sie sicher. dass er sich reibungslos bewegen lasst.
REINIGEN + DOCK + MAX + I blinken gleichzeitig| RAD KLEMMT| Die Rader des Robots stecken moglicherweise fest oder etwas hat sich in den Radern verfangen.
Uberprufen Sie die Rader und entfernen Sie sie gegebenenfalls FremdkOrper.
DrOcken Sie die Rader nach unten und lassen Sie sie dann wieder einrasten.
Rotieren Sie die Rader hin und her.

TWO (2) YEAR LIMITED GUARANTEE

When a consumer buys a product in the Europe, they get the benefit of legal rights relating to the quality of the product (your “statutory rights”). You can enforce these rights  against your retailer. However, at Shark we are so confident about the quality of our products that we give you an additional manufacturer’s guarantee of two years.
These terms and conditions relate to our manufacturer’s guarantee only – your statutory rights are unaffected.
Every Shark machine comes with a free parts and labour guarantee. You’ll also find online support at www.sharkclean.eu.

How do I register my extended Shark® guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your machine:

• Model Number
• Serial Number (only if available)
• Date you received the machine (from your in-store receipt or delivery note)

To register online, please visit www.sharkclean.eu

IMPORTANT

• The manufacturer’s guarantee covers your product for 2 years starting on the date of delivery.
• Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify the information you have supplied to us is correct. The inability  to produce a valid receipt may invalidate your guarantee.

How long are new Shark machines guaranteed for?
Our confidence in our design and quality control means that your new Shark vacuum cleaner is guaranteed for two years.

What is covered by the free Shark guarantee?
Repair or replacement of your Shark machine (at Shark’s discretion to decide whether to replace or repair) including all parts and labour. A Shark guarantee is in addition to your  legal rights as a consumer.
What is not covered by the free Shark guarantee?

1. Blockages – For details of how to unblock your vacuum cleaner, please refer to the Instructions.
2. Normal wear and tear of parts which require regular maintenance and/or replacement to ensure the proper functioning of your unit.
3. Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the vacuum cleaner which is not in accordance with the Shark  Instructions supplied with your machine.
4. Use of the vacuum cleaner for anything other than normal domestic household purposes.
5. Use of parts not assembled or installed in accordance with the operating instructions.
6. Use of parts and accessories which are not Shark spares.
7. Faulty installation (except where installed by Shark).

Where can I buy genuine Shark spares and accessories?
Shark spares and accessories are developed by the same engineers who developed your Shark vacuum. You’ll find a full range of Shark spares, replacement parts and accessories  for all Shark machines at www.sharkclean.eu.
Please remember that using non-Shark spares may invalidate your manufacturer’s guarantee. However, your statutory rights are unaffected.

END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE

www.SharkClean.co.uk/EULA      

References

• Digitale Visitenwagen | Grenzenlose Auswahl an mobilen Stationswagen
• Shark Clean
• Shark Clean
• Shark France | Aspirateurs Robots, Aspirateurs Balais sans fil, Balais Nettoyeurs Vapeur
• sharkclean.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>