ZZN ZY01 Waterproof Wireless Sports Earphones User Manual
- June 6, 2024
- ZZN
Table of Contents
ZZN ZY01 Waterproof Wireless Sports Earphones User Manual
Waterproof Wireless Sports Earphones
Thank you for purchasing ZZN products.
Product Diagrammatic Sketch
- Ear Hook
- Volume button
- Earphones cap
- MrB button
- LED indicator
- Microphone
- USB–Micro
Wearing
Step1 Gently hang the ear–hooks on your ears.
Step 2 Push the earphones slowly into your ear canals.
Step 3 Rotate the earphones to fit snugly
Operation of Earphones
Power on
Press the MrB button for 1 second.
Pairing
LED will flash red and blue after the earphones are powered on, and then
they will enter the pairing mode.
Connecting
Search for ZY01 and select it on your phone.
Power off
Press the MrB button for 3 seconds.
Reset
Press the MrB button for 10 seconds after the earphones have been powered
off
Other Operation of Earphones
- 1x: Accept / End / Play / Pause
- Hold for 1 second: Reject
- 2x:Siri
- Press + and – at the same time: Call
- 1x: Adjust volume
- Hold for 1 second: Change music
LED Indicator Guide
- Power On: LED lights blue for 1 second
- Power Off: LED lights red for 2 seconds
- Pairing Mode: LED flashes red and blue
- Connection: LED lights blue for 1 second
- Over Connection Distance: LED flashes blue
- Battery Low: LED flashes red 3 times
- Charging: LED lights red
- Charged: LED lights blue
- Reset: LED flashes red and blue 3 times
Warning and Tips
- Please read the user manual carefully before using the earphones, and keep it for future references.
- The earphones need to be fully charged priors to first–time use. lf the earphones are left unused for over 2 weeks, please recharge it periodically.
- Keep away from the fire and do not expose the product to strong sunlight.
- Do not use the product underwater, and do not use the earphones during a thunderstorm to avoid irregular function and increased risk of electric shock.
- Do not use the product while it is charging.
- Do not use harsh chemicals or strong detergents to clean the earphones.
- Keep away from children and pets.
Specifications
| Version | V5.0 |
|---|---|
| Support | HSP, HrP, A2DP, AVRCP |
| Transmission distance | ≥10m |
| Standby time | 150H |
| Call time | 12H |
| Music time | 16H |
| Waterproof level | lPX7 |
| Battery | 3.7V 120mAh/0.444Wh |
| lnput | DC 5V |
| Charging time | ≤2H |
| Earphones weight | 21.5g |
| Earphones line length | 420mm |
FCC ID :2A2UC-ZY01
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help with important announcement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FAQ
Q: I have connected the earphones with my phone, but l can not hear any
sound.
A: Please make sure that you have turned up the volume of both devices.
Some phones require you to set up Bluetooth earphones as an audio output
device before the sound is transmitted. Please check the instruction of your
phones. lf you are using a music player or other Bluetooth device, please make
it supports A2DP stereo music profile.
Q: The sound is not very clear./The caller cannot hear my voice clearly.
A: Please adjust the volume on your phone and earphones. Please make sure
there is no interference source nearby, and stay close to your earphones.
Q: The connection is not stable and cuts out intermittently.
A: Please make sure there is no radio or Well interference nearby.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>