FOSCAM V5EP 5MP Outdoor POE IP Security Camera User Manual
- June 13, 2024
- FOSCAM
Table of Contents
FOSCAM V5EP 5MP Outdoor POE IP Security Camera
Product Information:
- Product Name: Foscam 5MP Outdoor POE IP Security Camera
- Model: V5EP
Key Features:
- PoE-compliant, allowing transmission of power and data via a single Ethernet cable
- Supports Micro SD Card for storage
- LAN 10/100M adaptive Ethernet interface
- Waterproof lid installation guide for outdoor use
Physical Description:
- Front Panel: Not specified in the manual
- Interface:
- LAN 10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with various network devices, such as hub, router, etc.
- Power Interface: Connect the external power adapter, request for 12V / 1A power.
Product Usage Instructions
Read before Use:
Please first verify that all contents received are complete according to
the Package Contents listed below. Before the Network Camera is installed,
please carefully read and follow the instructions in the Quick Setup Guide to
avoid damage due to faulty assembly and installation. This also ensures the
product is used properly as intended.
Packing Contents:
Not specified in the manual.
PoE Connection:
Connect the Network Camera to a PoE-enabled router/switch via Ethernet
cable.
SD Card Management:
This camera supports Micro SD Card. When you plug in the SD card during the
camera work process, please reboot the camera again, or else the SD card might
not work well. On Foscam app go to the Settings > Device Status > Device
Status page, you can see the SD card status.
Add Device: Connection via the Foscam App:
Scan the QR code below to download and install the Foscam APP.
Please refer to the Quick Setup Guide for detailed instructions.
Installation:
Point the camera at the desired location and use the screws provided to mount
it. Please Note: Ensure that rain or water will not reach the connector ports
at the end of the tail cable. These connectors are not weather-resistant.
Waterproof Lid Installation Guide:
- Thread the Ethernet cable through the top cover and then the waterproof connector.
- Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector. Note: The rubber seal ring provided has been cut. If not, you may manually cut it.
- Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernet port.
- Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two parts.
- Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into position firmly to finish installation.
Default Parameters:
- Default network parameters:
- IP address: obtain dynamically
- Subnet mask: obtain dynamically
- Gateway: obtain dynamically
Specification:
- Spotlight Image Sensor Lens: Not specified in the manual
- Color Temperature Sensor Type: Not specified in the manual
- Display Resolution: Not specified in the manual
- Min. Illumination: Not specified in the manual
- Lens Type: Not specified in the manual
- Angle of view: Not specified in the manual
- Image Compression: Not specified in the manual
User Manual
Foscam 5MP Outdoor
POE IP Security Camera
Model: V5EP
Overview
Key Features
- 5MP QHD Waterproof IP Camera
- H.264+/H.264 video Compression
- Supports Human detection, Motion Detection and Vehicle Detection
- Compatible with free Foscam Video Management Software
- Compatible with free Foscam iOS and Android APP
- Supports PoE Function
- Supports Full Duplex two-way Audio
- Supports WDR(Wide-Dynamic Range)
- Supports 256GB Micro SD Card storage(External)
- Night Vision Range up to 20m(66 feet)
- P2P Feature for Easy Remote Access
- Supports image snapshot
- Supports dual-stream
- Supports remote viewing & record from anywhere anytime
- Multi-level users management with password protection
- Supports multiple network protocols: IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
- Supports Alexa
- Supports Google Assistant
PoE
The Network Camera is PoE-compliant, allowing transmission of power and data
via a single Ethernet cable.
Such as the following picture: connect the Network Camera to a PoE-enabled
router / switch via Ethernet cable.
Read before Use
Please first verify that all contents received are complete according to the
Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the
instructions in the Quick Setup Guide to avoid damage due to faulty assembly
and installation. This also ensures the product is used properly as intended.
Packing Contents
| ● Camera× 1 | ● Ethernet Cable× 1 |
|---|---|
| ● Quick Setup Guide × 1 | ● Expansion Screws× 1 |
| ● Waterproof Lid × 1 | ● Mounting Template × 1 |
| ● Surveillance sign× 1 |
Physical Description
Front Panel
Interface
-
LAN
10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with various network devices, such as hub, router, etc. -
Power Interface
Connect the external power adapter, request for 12V / 1A power.
SD Card Management
This camera supports Micro SD Card.
When you plug in the SD card during the camera work process, please reboot the
camera again, or else the
SD card might not work well.
On Foscam app go to the Settings Device Status Device Status page, you can see
the SD card status.
Add Device: Connection via the Foscam App
Scan the QR code below to download and install the Foscam APP.
Please refer to the Quick Setup Guide.
Installation
Please refer to the Quick Setup Guide.
Point the camera at the desired location and use the screws provided to mount it.
Please Note:
Ensure that rain or water will not reach the connector ports at the end of the
tailcable. These connectors are not weather-resistant.
Waterproof Lid Installation Guide
When mounting your PoE camera outdoors, you are suggested to install the
waterproof lid for it. You may follow the steps for installation.
-
Thread the Ethernet cable through the top cover and then the waterproof connector.
-
Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector.
Note: The rubber seal ring provided has been cut. If not, you may manually cut it. -
Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernet port.
-
Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two parts.
-
Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into position firmly to finish installation.
Default Parameters
Default network parameters
- IP address: obtain dynamically
- Subnet mask: obtain dynamically
- Gateway: obtain dynamically
Specification
| ITEMS | V5EP |
|---|---|
| Spotlight | Color Temperature |
Image Sensor
| Sensor Type| High Definition Color CMOS Sensor
Display Resolution| 5.0Megapixels(30721728)
Min. Illumination| 0 Lux (With IR Illuminator)
Lens| Lens Type| f:4mm; F2.1
Angle of view| Diagonal: 94°, Horizontal:78°, Vertical: 43.6°
Video| Image Compression| H.264+/H.264
Resolution| 5MP(30721728) 1.5M/15
fps,1080P(19201080)1M/25fps,720P(1280720)1M/15fps
Stream| Dual stream
Image Adjustment| The hue, brightness, contrast, saturation, sharpness are
adjustable
Flip Image| flip and mirror
Night Mode| Manual and automatic modes, when the white light is on, the night
vision image is colored
| Night Visibility| With 4pcs IR-LED and spotlight, Night Vision Range up to
20m
---|---|---
Audio
| Input/Output| Built-in mic and speaker, supports full duplex 2-way Audio
Audio Compression| PCM/AAC
Siren| Support maximum 100dB alarm siren
Network
| Ethernet| One 10/100Mbps RJ45 port
Remote Access| P2P
Network Protocol| IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
System Requirements| ****
Operating System
| Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android
(Foscam app), iOS (Foscam app)
Other Features
| Motion Detection| Alarm via E-Mail, upload alarm snapshot to FTP
Human Detection| Alarm via E-Mail, upload alarm snapshot to FTP
Vehicle Detection| Alarm via E-Mail, upload alarm snapshot to FTP
User Accounts| Three levels user role
WDR| Improve image clarity in complex scenario
Zoom| 6X digital zoom function
Storage
| Support max. 256GB Micro SD card, local and FTP storage, Foscam
cloud storage
Reset| Reset button is available
Intelligent Assistant| Supports Alexa, Google Assistant
Power
| Power Supply| DC 12V/1.0A (Not standard)
POE Standard| 802.3af
Power Consumption| 5 Watts (Max.)
Physical| Dimension(LxWxH)| 170(L)x66 (W)x66 (H)
Net Weight| 342g
Environment
| Waterproof| IP66
Operating Temperature| -20°C ~ 50°C (-4°F ~ 122°F)
Operating Humidity| 10% ~ 80% non-condensing
Storage Temperature| -20°C ~ 50°C (-4°F ~ 122°F)
Storage Humidity| 0% ~ 90% non-condensing
Certification| FCC, CE, RoHS, IP66, UKCA
For other parts, please refer to the “FOSCAM Camera User Manual”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>