PROJECT SOURCE 4767252 4 OZ.Premium RV GEL Coaat Repair Kit Instruction Manual
- June 9, 2024
- PROJECT SOURCE
Table of Contents
PROJECT SOURCE 4767252 4 OZ.Premium RV GEL Coaat Repair Kit
Tnank you tor purchasing this Project source product created these easy-to-to low instructions to ensure you spend your time enjoying the product Instead or putting it together, But, it you need more information than what is provided here, please Visit Lowes.com, the learn is no longer 1ar sale, or t you have any questions or problems, please Call our customer service department at db6) 55-B821, 8 a m – 6 p. monday-Sunday You can also contact us at partsplus@owes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. lf have pat is missing or damaged do not attempt to assemble the produiGt
Estimated Assembly Time: 2 Hours
TOOLS REQUIRED
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit www.lowes.com for more information.
Package Content
- Polyester Gelcoat Repair Paste
- Liquid Hardener .5 oz 3.6 color Pigments- 1/4 oz White 1/40z of each of the following: Black, Yellow Oxide, Red Oxide, Phthalo Blue, Brown
- Cleaning Solvent 1 oz
- Rubbing Compound 1oz (30ml) 6.3 Stir Sticks
- Pair Gloves 8.3 Mixing Cups
- Spreader
- Sandpaper-Release Film
- Instructions& Color Match Guide
Safety Information
Please read and understand this entire manual before attempting to assemble, operate or install the product.
- Flammable liquid and vapor. Causes skin irritation.
- Causes serious eye irritation.
- Harmful if inhaled. Suspected of causing genetic defects.
- Suspected of causing cancer. May damage fertility or the unborn child. Causes damage to organs.
- Causes damage to organs through prolonged or repeated exposure. Toxic to aquatic life.
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Keep away from heat/sparks/open flames/hot surfaces.- No smoking.
- Keep container tightly closed. Ground/bond container and receiving equipment.
- Use explosion-proof electricaliventilating/lighting equipment. Use only non-sparking tools.
- Take precautionary measures against static discharge.
- Do not breathe dust:fumeigasimist/vapors/spray. Avoid breathing dustifume/gas/mist/vapors/spray.
- Wash thoroughly after handling. Do not eat, drink or smoke when using this product.
- Use only outdoors or in a well-ventilated area. Avoid release to the environment.
- Wear protective gloves/protective clothing/eye protection/face protection.
Color Chart
Desired color to match| Base Color
Tinting Color
---|---
RED| RED| —
MAROON| RED| BLACK
LIGHT RED| RED| WHITE
REGAL RED| RED| BLUE
BLUE| BLUE| —
NAVY BLUE| BLUE| BLACK
ROAL BLUE| BLUE| WHITE
FRENCH NAVY| BLUE| RED
TURQUOISE BLUE| BLUE| YELLOW (VERY SMALL
AMOUNT)
TURQUOISE GREEN| BLUE| YELLOW
BLACK| BLACK| —
CHARCOAL| BLACK| WHITE
BROWN/ MARRÓN| BROWN| —
CHOCOLATE| BROWN| BLACK (SMALL AMOUNT)
MID-BROWN| BROWN| YELLOW/ AMARILLO
MEDIUM BROWN| BROWN| BLACK AND WHITE
REDDISH BROWN| BROWN| BLACK
DARK CHOCOLATE| BROWN| RED
PINK| WHITE| RED
WHITE| WHITE| —
CREAM| WHITE| YELLOW (SMALL AMOUNT)
ALMOND| WHITE| YELLOW AND RED TO TONE.
SHADE WITH BLUE
OFF WHITE| WHITE| BLACK OR BROWN
LIGHT STONE| WHITE| MID-BROWN
POWDER BLUE| WHITE| BLUE
HARVEST GOLD| WHITE| YELLOW AND RED TO
TONE. BLUE FOR EYE APPEAL
DARK BLUE GRAY| WHITE| BLACK AND BLUE
OFF-WHITE BROWN| WHITE| BROWN (1ST) AND YELLOW
WEDGEWOOD BLUE| WHITE| BLUE PLUS A SMALL
AMOUNT OF BLACK
CHARCOAL OR LIGHT GRAY| WHITE| BLACK
TAN| YELLOW| RED AND WHITE DARKEN WITH
BLACK
LIME| YELLOW| BLUE (SMALL AMOUNT)
GREEN| YELLOW| EQUAL AMOUNT OF BLUE
YELLOW| YELLOW| —
CANARY O| YELLOW| WHITE
MUSTARD| YELLOW| RED AND BLACK
TURQUOISE| YELLOW| BLUE AND WHITE
LIGHT YELLOW| YELLOW| WHITE
ORANGE OR GOLD| YELLOW| RED
PINE OR OLIVE GREEN| YELLOW| BLACK
LIME OR BOTTLE GREEN| YELLOW| BLUE
BEIGE| WHITE (MIX 1ST)| BROWN AND YELLOW
(SMALL AMOUNT)
Installation
-
MAKE SURE YOU HAVE ALL THE MATERIALS AVAILABLE (KIT CONTENTS, EQUIPTMENT, ACETONE, AND CLEAN RAGS) BEFORE YOU START YOUR PROJECT PREPARE THE DAMAGED AREA BY REMOVING GREASE WAX DEBRIS ETC.
-
USE ACETONE TO CLEAN UP RESIDUAL DEBRIs. DO NOT ALLOW THE ACETONE TO TOUCH ANY OTHER AREAS (MASK-OFF THE AREA AROUND).
NOTE: THE GEL COAT OR RESIN POLYESTER DOES NOT BIND WELL TO EPOXY. DO NOT APPLY OVER EPOXY. -
DISPENSE A LITTLE MORE POLYESTER RESIN GEL THAN YOU THINK Is NEEDED TO COMPLETE ALL 3 REAPIRS INTO THE PLASTIC MIXING CUP (TO ENSURE YOU ONLY NEED ONE COLOR TO MATCH). IF YOU NEED TO FILL IN THE REPAIR WITH THE COLOR OF THE PAINT, MIX THE BASE COLOR AND MEKP IN A MIXING CUP AND PUT A SMALL AMOUNT TO FILL IN THE REPAIR WITH YOUR BASE COLOR. YOU CAN IMMEDIATELY SPRINLE OR BLOW A SMALL AMOUNT OF FLAKE ON THE REPAIR AREA.
-
FOR EACH TEASPOON (1/6 oz) OF BLENDED GEL COAT PASTE, ADD FOUR DROPS OF HARDENER. THOUROUGHLY MIX PASTE, PIGMENTS, AND HARDENER. YOU HAVE A WORK TIME OF APPROXIMATELY 15 MINUTES.
-
USE THE SPREADER TO ADD THE BLEND TO THE DAMAGED AREA. wORK MIXTURE WELL INTO THE DAMAGED AREA. BE CAREFUL THAT THE MIXTURE DOES NOT COME INTO CONTACT WITH OTHER AREAS.
-
USE THE ENCLOSED CLEAR RELEASE PAPER (OR A SHEET OF WAX PAPER) TO PROTECT THR REPAIR AREA ENTIRELY. MAKE SURE THERE ARE NO AIR BUBBLES LEFT BETWEEN THE PAPER RELEASE AND REPAIR AREA. SMOOTH oUT THE REPAIR PATCH WITH THE SPREADER OVER THE FILM. THIS WILL HELP EVEN AND SMOOTH OUT THE REPAIR. THE PATCH WILL HEAL IN ABOUT AN HOUR.
-
REMOVE AFTER AN HOUR-CLEAN THE AREA WITH A CLEAN CLOTH WITH ACETONE.
-
SAND REPAIRED AREA WITH WET 400, THEN 600-GRIT SANDPAPER FOR A GOOD QUALITY FINISH. THEN, BUFF WITH A GOOD POLISHING/RUBBING cOMPOUND (INCLUDED).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>