SONOFF S26R2ZB ZigBee Smart Plug User Manual
- June 6, 2024
- SonOFF
Table of Contents
S26R2ZB
User manual V1.0
Operating Instruction
1. Download APP
2. Power on
After powering on, the device will enter the pairing mode during the first use and the Zigbee LED signal indicator flashes.
3. Add sub-devices
Connect the SONOFF ZigBee Bridge before adding the sub-device.
Access the eWeLink APP, select the Bridge that you want to connect, tap “Add”
to add a sub-device, and be patient until the pairing completes.
If the addition failed, move the sub-device closer to the Bridge and try
again.
SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same time.
Power the Bridge on, set the sub-device to the pairing mode. Then access the Bridge page in the eWeLink APP to tap “Add”, and be patient until the pairing completes.
More APP application platforms and gateway recommendations
This device supports the following gateways besides SONOFF ZigBee:
Echo Studio
Echo (4th Gen)
Echo Plus (model: ZE39KL)
2nd Gen Echo Show (model: DW84JL)
2nd Gen Echo Plus (model: L9D29R)
Samsung SmartThings hub
Philips Hue Smart Hub
Gateway adding instruction:
- Refer to the gateway user manual to download the matched APP and get it paired.
- Set ZBMINI to the pairing mode.
- Add ZBMINI according to the prompt of APP. Please select eWeLink or SONOFF when adding.
If the addition failed, move the sub-device closer to the Bridge and try again.
Specifications
| Model | S26R2ZBTPF, S26R2ZBTPE, S26R2ZBTPG |
|---|---|
| Input | 250V~, 50/60Hz |
| Max. load | S26R2ZBTPF: 4000W/16A |
S26R2ZBTPE: 3680W (230V)/16A
S26R2ZBTPG: 3250W/13A
ZigBee| IEEE 802.15.4
Operating systems| Android & iOS
Working temperature| -10℃~40℃
Material| PC V0
Dimension| 97.5x56x35mm
Product Introduction
Features
The is a smart device with ZigBee wireless communication protocol that allows you to remotely turn on, schedule on/off, and set smart scenes to trigger other devices, etc.
The above functions are determined by the connected ZigBee Hub.
Switch Network
If you need to change the network, long-press the pairing button for 5s until the ZigBee LED signal indicator flashes and releases, then the device enters pairing mode and you can pair again.
Factory Reset
Deleting the device on the eWeLink app indicates you restore it to the factory setting.
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type S26R2ZBTPF, S26R2ZBTPE, S26R2ZBTPG is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals
Shenzhen Sonoff Technologies Co., Ltd.
1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, China
ZIP code: 518000 Website: sonoff.tech
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>