Pyle Single Voice Coil Car Subwoofer – 6.5 Inches, 150 Watts at 4-Ohm Car User Manual

Pyle Single Voice Coil Car Subwoofer – 6.5 Inches, 150 Watts at 4-Ohm Car

Specifications

• BRAND: Pyle
• MODEL NAME: Pyle
• SPEAKER TYPE: Subwoofer
• MOUNTING TYPE: Car Mount
• CONTROLLER TYPE: Voice Control
• VOICE COIL: 1.0”
• VOICE COIL TYPE: High-Temp Aluminum
• MAGNET SIZE: 20 Oz
• MAGNET TYPE: Barium Ferrite Magnet
• FREQUENCY RESPONSE: 50Hz-5000Hz
• SENSITIVITY: 91 dB (1w/1m)
• MAXIMUM POWER HANDLING: 150 watts
• RMS: 75 watts
• IMPEDANCE: 4-ohm
• SPEAKER DIMENSION: 6.6 ” x 6.6” x 2.6”
• PACKAGE DIMENSIONS: 7.5 x 7.25 x 3.25 inches
• ITEM WEIGHT: 3.6 pounds
• CONSTRUCTION MATERIALS: Engineered ABS

Introduction

This single voice coil subwoofer has a maximum power handling of 150 watts, a peak RMS of 75 watts, and a 4-ohm impedance, enabling it to produce a bassy sound for any music you play in your car. Quickly install this single voice coil subwoofer in your car! It would be easier to attach this to your automobile because it has a quick connect speaker terminal plate. Speaker dimension is 6.6 ” x 6.6” x 2.6”. The quickest bass lines will be crisper since excellent quality often produces them with speed and reaction, making the audio sound broader and better.

This subwoofer can minimize distortion and do away with the requirement for in-car acoustic speakers. The speaker’s diaphragm might distort when a full- range speaker produces bass at a low frequency. This subwoofer is made of engineered ABS and intended for use in custom audio vehicle applications. Additionally, this subwoofer has a substantial butyl rubber surround and a high-strength engineering plastic basket for long-term use.

HOW TO KNOW IF SUBWOOFER IS POWERFUL

The speaker’s power is measured in watts. The higher the wattage, the more potent the speaker. Any subwoofer with a wattage between 150 and 500 is ideal for a fantastic music listening experience and is inexpensive.

HOW TO GET MORE BASS

Your subwoofer should be positioned facing outward into the rest of the room and within 8–12 inches of a wall for the best sound quality. Consider locating your subwoofer in the room’s corner for even greater output, since this placement can greatly improve the overall sound.

HOW TO KNOW IF VOICE COIL IS BLOWN

Distortion at Moderate Volumes – If hiss, static, and fuzz are audible even at moderate volumes, you are likely dealing with one of two issues. You either have a ripped cone or you have loose or broken voice coils. If you increase the volume, the issue ought to get worse.

HOW TO KNOW IF SUBWOOFER IS BLOWN

The sound quality provided by the speakers can be used to identify a blown subwoofer. Start by turning on your sound system with a modest volume. If sound is present but it is severely distorted, your subwoofer may be partially blown.

Frequently Asked Questions

What distinguishes a single voice coil from a dual voice coil?

A single length of wire is wrapped around the former to create a single voice coil (SCV). In a dual voice coil (DVC), the former is encircled by two wire coils. A dual voice coil subwoofer has two positive and two negative terminals, one for each coil, whereas a single voice coil subwoofer only has one positive and one negative terminal.

What happens if only one voice coil is connected?

Using just one coil is not an option, to put it simply. One coil’s use influences a subwoofer’s ability to handle thermal power as well as the strength of the magnetic field and the Thiele/Small parameters.

What distinguishes one subwoofer from another?

In general, a more powerful subwoofer is preferable over a less powerful subwoofer since it will play louder and handle lower frequencies with more accuracy thanks to better drive unit management.

What increases the subwoofer’s impact?

One of the most common methods is to modify your subwoofer with filters or phase shifters. Your subwoofer can also receive small improvements to increase its impact. Replace the voice coil, the little cone in front of the subwoofer, or buy a new enclosure for the subwoofer.

Do larger voice coils perform better?

Well, the voice coil can handle more power the bigger it is made, but it also produces more heat. Larger coils typically have better control, whereas smaller coils may be slightly more resonant.

My vocal coils are burning, why?

In contrast to all other flaws, a burned or melted voice coil is an undeniable indication that an electrical surge has damaged the loudspeaker.

The definition of a single voice coil

When you notice a single voice coil subwoofer, it signifies that the magnetic wire has just one coil and one set of positive and negative ends. One set of connections, one positive and one negative, will be present on the subwoofer. The impedance of the voice coil is commonly 1 ohm, 2 ohm, or 4 ohm.

Can each voice coil be wired to a separate channel?

Finally, if your amplifier cannot be mono-bridged or if you are bridging a four channel amplifier down to two channels to drive your sub, you can wire each voice coil to a different channel of your amplifier.

What is the ideal Ohm for subs?

For those seeking stronger output, a 2-ohm subwoofer will be louder than a 4-ohm subwoofer, making it the preferable choice. A 4-ohm subwoofer, however, might provide greater sound quality.

What wattage does a good subwoofer need?

As a general rule, it is preferable to use at least 300 watts to ensure that your subwoofer has enough power. More speakers can always be added, but it’s crucial that the amp works with the speaker system as well.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>