EDIFIER W280NB Bluetooth Sport Headset with Active Noise Cancellation User Manual
- June 6, 2024
- Edifier
Table of Contents
EDIFIER W280NB Bluetooth Sport Headset with Active Noise Cancellation
Download EDIFIER CONNECT APP from the APP store/Google Play Store
Please visit EDIFIER website for the full version user manual:
www.edifier.com
For user safety and compliances, also for the optimum performance, please
carefully read safety instructions and use the product in accordance with
them.
Operating instructions
Power on/off / call / music playback / mode selection
Mode switch: Press the power button to switch amongst the Ambient sound
mode/Noise cancellation mode/Standard mode;
Game mode: After Bluetooth pairing is successful, you can enable or disable
game mode through the EDIFIER CONNECT APP.
Bluetooth connection
- Press and hold the ” ” button for 3 seconds to enter Bluetooth pairing, and the red and green lights will flash alternately;
- Set mobile phone to search for and connect to “EDIFIER W280NB”, after pairing is successful, the green light will flash twice per 5 seconds.
Note
The headset will auto-enter Bluetooth pairing state(the red and green lights
flashing alternately) when powered on for the first time, you can directly set
mobile phone to search for and connect to “EDIFIER W280NB”. After pairing is
successful, the headset will auto-connect to the device connected last time
when powered on again.
Note: Images are for illustrative purposes only and may differ from the actual product.
Connect to two devices
- Firstly pair mobile phone A with the headset, after pairing is successful, the headset will enter pairing mode again through the EDIFIER CONNECT APP;
- Set mobile phone B to search for and connect to the headset;
- Manually operate the mobile phone A to connect to the headset to complete connecting to two devices, after pairing is successful, the green light will flash twice per 5 seconds.
Clear pairing records
- When the headset is powered on and not connected with any Bluetooth devices, simultaneously press and hold the “+” “-” buttons for 5 seconds to clear pairing records, and the green light will flash six times rapidly when successful.
Maintenance
- If it is not used for long periods of time, please charge the product with lithium battery every three months.
- Keep the product away from humid places to avoid affecting internal circuit.
- Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and make plastic components deformed.
- Do not put the product in cold places to avoid damaging internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.
FCC ID: Z9G-EDF145
IC: 10004A-EDF145
Model: EDF200039
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2021 Edifier International Limited. All rights reserved.
Printed in China
NOTICE
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.