Dawnsun Electronic Technology Zhongshan TX029-RS Remote Control Ceiling Fan Instruction Manual
- June 6, 2024
- Dawnsun Electronic Technology Zhongshan
Table of Contents
Dawson Electronic Technology Zhongshan
FCC ID/IC ID Label
Model: TX029-RS
TX029-LR
OPRATION INSTRUCTION
Model: TX029-RS
TX029-LR
Remote Control Functions
1. FAN& LIGHT/OFF Button: Press and release to turn the fan & light on or
off. Press and hold for 3 seconds to enter the”Walk away from time delay”.
2. FAN Speed Button:
Turns the fan on High/Medium/Low speed and OFF.
3. LIGHT ON/OFF/DIMMING Button:
To control light on, off, and dimming.
4. Comfort Breeze Button.
5. Sleep Timer Button.
6. Extended Function Switch R.
7. Extended Function Switch S.
| Remote Control Functions
1. FAN& LIGHT/OFF Button: Press and release to turn the fan & light on or
off. Press and hold for 3 seconds to enter the “Walk away from time delay”.
2. FAN Speed Button:
Turns the fan on High/Medium/Low speed and OFF.
3. LIGHT ON/OFF/DIMMING Button:
To control light on, off, and dimming.
4. Comfort Breeze Button.
5. Sleep Timer Button.
6. Extended Function Switch L.
7. Extended Function Switch R.
---|---
Note: Install 2 AAA 1.5V batteries to the remote control.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1)This device may not cause harmful
interference. (2)This device must accept any interference received, including
interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and use in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
IC STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Products shall be subject to any changes without additional notices due to
DawnSun’s will keep innovation and optimization o n the products.