CANTON Sound M Soundbar For TV and Stereo User Guide

CANTON Sound M Soundbar For TV and Stereo

For devices without a mains switch, in which the mains plug or the mains socket serves as an switching device, the plug of the mains cable or the device mains socket must be freely accessible at all times. Disconnect the device from the mains during thunderstorms or prolonged periods of non-use. To completely disconnect the device from the mains, unplug the mains cable from the wall outlet. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Always switch off the device before connecting or disconnecting connection cables. Always pull the plugs and not the cables.
Install the device according to the manufacturer‘s instructions. Always choose a level surface. The device must be in a vertical position. Do not exert force on operating elements, connections and wires.
The device may only be operated with the voltage and frequency specified on the device or the type plate. Do not insert any objects or body parts into the openings of the device. Live parts inside the housing could be touched and/or damaged. This can lead to short circuits, electric shocks and fire.
Only use fixing materials and accessories that are approved by the manufacturer and/or supplied with the device.
Only use trolleys, stands, tripods, holders or tables specified by the manufacturer or sold with the device. When using a trolley, be careful when moving the trolley/device assembly to prevent damage and injury from tipping over.
Only clean this device with a clean, dry cloth. Do not use any aggressive, alcoholic or abrasive agents for cleaning.
To avoid electric shock, do not open the housing! There are no user- serviceable parts within the device. Consult qualified personnel for all repair and maintenance work. This is required when the device has been damaged in any way, such as mains cable or plug damage, liquid or objects have been spilled, exposed to rain or moisture, does not operate normally, or has been dropped. Do not make any changes to the device or accessories. Unauthorized modifications can compromise safety, regulatory compliance or system performance. In this case, the type approval/warranty may expire.
If sound distortions such as unnatural knocking, throbbing or high-frequency clicking occur during playback, the volume level must be reduced immediately
To avoid possible hearing damage, do not listen at high levels for long periods of time. Interrupt the playback if you hear ringing or whistling noises in your ears or if you have the impression that you can no longer hear high sounds (even for a short time).
New and used batteries must be kept away from children. Devices in which the battery compartment cannot be closed securely must not be used any longer and must be kept away from children. The remote control supplied with this device contains a button cell as battery. Swal- lowing the button cell can cause serious internal burns and thus death in only 2 hours! Do not ingest the battery, Chemical Burn Hazard. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Take care of your environment when disposing of the battery. Batteries must be disposed of at a battery collection point. Do not expose batteries to high temperatures, such as direct sunlight, fire or the like. Batteries must be inserted correctly according to the polarity imprint. Incorrect insertion can lead to damage. Only use the batteries or rechargeable batteries specified for the device. The batteries supplied are not rechargeable batteries, i.e. these batteries must not be recharged.
The device contains permanent magnets. Do not place or lay objects that are sensitive to magnetic fields (e.g. tube TVs, external hard drives, magnetic cards, video cassettes etc.) on or directly next to the device.
The device and/or the accessory may contain small parts that can be swallowed. Therefore not suitable for children under three years.
This symbol indicates uninsulated dangerous voltages inside the case that are sufficiently strong (amplitude) to cause a fire or electric shock.
This symbol warns you of important operating and maintenance instructions in the accompanying documentation (manual) supplied.
This symbol indicates Class II devices, where protection against electric shock is provided by double or reinforced insulation during specified use and therefore no protective earth connection is required.

PACKAGING CONTENT

Carefully unpack the Sound M and check that the delivery content is complete and undamaged. If any part is damaged, do not use it, but contact our service department (see back cover). Please keep the packaging during the warranty period.
Delivery content:

• 1x Sound M
• 1x Smart-remote
• 1x Power cord
• 1x High Speed HDMI® Cable (3m)
• 1x Optical digital audio cable (1,5m)
• 1x Short manual
• 4x Equipment feet large (20mm)
• 4x Equipment feet small (12mm)

SETUP

Place the Sound M in the desired location and connect it to the power outlet using the power cord. To connect the Sound M to your TV or other devices, please make sure that they are connected to the mains supply.

CONNECTION TERMINAL (Back side)

1. HDMI OUT / ARC / [TV] (Supports ARC, 3D, 4k, HDR, HDCP 2.2, CEC)
   For the connection to the HDMI® (ARC) input on your TV.

2. HDMI 1-3 / HD1/[BDP], HD2/[SAT], HD3/[PS] (Supports 3D, 4K, HDR, HDCP 2.2, CEC)
   For the connection to the HDMI® output on your digital devices.

3. OPTICAL / OPT / [CD] For the connecting to the optical audio output on your TV or digital device (TOSLINK, max. 96kHz/24bit)

4. SERVICE
   For USB firmware updates and service purposes only! No charging functionality, no audio or video playback.

5. SUB OUT
   For the connection to an optional powered subwoofer (RCA, max. 2Vrms)

6. COAXIAL / COX / [DVD] For the connection to the digital coaxial audio output on your TV or digital device (RCA, max. 96kHz/24bit)

7. AUX LEFT + RIGHT / LIN / [AUX] For the stereo connection to the analog line output on your playback device (RCA, max. 2Vrms)

8. POWER INPUT
   For connection to the mains supply (IEC C8)

SMART-REMOTE

1. Power Switches the Sound M ON/OFF (on/standby)
2. Mute Mutes audio
3. Up [ ] Sets input resp. menu item upwards
4. Down [ ] Sets input resp. menu item downwards
5. OK Enters next menu level
6. Plus [+] Increases volume resp. menu value
7. Minus [-] Decreases volume resp. menu value
8. Menu Enters settings menu resp. previous menu level
9. Play Mode Toggles btw. the several play modes:
   • Stereo For music playback
   • Movie Virtual surround sound for movies
   • Music Virtual surround sound especially for music videos etc. (not available with connected surround speakers)
   • Party Plays the front channels FL/FR also on (connected) surround speakers
   • Discrete Surround sound for movies, music etc. without the use of a virtualizer (only available with connected surround speakers)
10. Sound Toggles btw. bass, midrange and treble tone control settings:
    • Bass Bass adjustment from -6dB to +6dB
    • Midrange Midrange adjustment from -6dB to +6dB
    • Treble Treble adjustment from -6dB to +6dB
11. Preset 1-3 Preset keys to store or recall (sound)settings
12. Play/Pause Play/Pause function during audio playback using Bluetooth® wireless technology
13. Skip FW Skip forward function during audio playback using Bluetooth® wireless technology
14. Skip BW Skip backward function during audio playback using Bluetooth® wireless technology
15. Bluetooth Initializes the pairing process with the (mobile) device

DISPLAY INDICATIONS

The Sound M has an On-Screen Display (menu visible on the TV), a LED status indicator (green or red) and a LED display (in the front of the Sound M). On- Screen Display
All settings and the configuration of the Sound M can be conveniently performed via the On-Screen Display on your TV screen. To do this, the Sound M must be connected via a HDMI® cable to your TV. The menu is simple and structured and all changes you make on the Sound M are displayed on your TV. By pressing the menu button „M“ on the Smart-remote, you can access the main menu. Practical tip:
To change the language of the On-Screen Display from German to English, please go to the main menu by pressing the button „M“. Under „Systemeinstellung“ [SYS] select the menu item „Displayeinstellungen“ [UIS] and change the language under the menu item „Sprache“ [LAN].

LED status indicator
When you switch on the Sound M, the status LED lights up green. In standby mode the status LED lights red.

LED display
The LED display is located in the front of the Sound M and lights up for five seconds when a command is received. It indicates the selected function as abbreviation or scroll text. The most important display indications and their meanings are listed here:

(connected) surround speakers
Play-Mode| DISCRETE| Surround sound for movies, music etc.
Function| Display| Meaning
---|---|---
Bluetooth®| BTP| Bluetooth® pairing mode
Bluetooth®| BT- / CON| Connection established
Bluetooth®| BT- / DIS| Connection disconnected or interrupted
Bluetooth®| FAI| Failure occurred during pairing process
Incoming signal| DOLBY DIGITAL| Dolby® Digital multichannel bitstream
Incoming signal| DOLBY DIGITAL 2.0| Dolby® Digital two-channel bitstream
Incoming signal| DTS| DTS® Digital SurroundTM bitstream
Incoming signal| PCM| Digital stereo signal

Note:
Further displays can be found in the detailed operating instructions. These can be found at: www.canton.de/manual/soundm

CONNECTION TO TV DEVICE

HDMI® (recommended)

1. Connect a HDMI® cable from the HDMI OUT (ARC) output on the back of the Sound M to the HDMI IN (ARC) input on your TV.

2. Now select the input [TV] by the Smart-remote using the up or down arrow key „ / “.
   Notes:

   • A HDMI® connection supports digital audio and video with a single cable. It is the best option to connect your Sound M.

   • If your TV features a HDMI® ARC connector, you can also enjoy the TV
     internal audio through your Sound M by using this HDMI® cable.

   • This HDMI® connection is required if you intend to connect other video devices to the Sound M inputs to display them on your TV.

   • In this case, activate CEC mode on your TV. CEC (Consumer Electronics Control) is a feature that allows compatible devices to be controlled from a single remote control. For details, refer to the instruction manual of your TV.

Optical digital input (alternative)

1. Connect the input OPTICAL at the Sound M to the OPTICAL OUT connector of your TV with an optical cable (TOSLINK).
2. On the Smart-remote, use the up or down arrow key „ / “ to select the input [CD].
   Note:
   Make sure you have removed the protective caps from both ends of the optical cable.

CONNECTION TO OTHER DEVICES

HDMI® (recommended)
To connect other digital devices such as a satellite receiver, BluRay-player, game console etc., it is recommended to connect these devices via one of the 3 HDMI® inputs of the Sound M.

1. Connect one of the 3 HDMI® inputs (HD1/HD2/HD3) on the back of the Sound M with the HDMI OUT output on your digital device with a HDMI® cable.
2. Now, select the used input [BDP] for HD1, [SAT] for HD2 or [PS] for HD3 with the up or down arrow key „ / “ on the Smart-remote.

Note:
Make sure that you do not connect the other playback devices to the TV, but directly to the Sound M. This is the only way to ensure that the best possible multichannel audio format/audio signal is reproduced.

Optical digital input (alternative)

1. Connect the input OPTICAL at the Sound M to the OPTICAL OUT connector of your digital source with an optical cable (TOSLINK)

2. On the Smart-remote use the up or down arrow key „ / “ to select the input [CD].
   Notes:

3. If the optical digital input is already in use, please use one of the other unused inputs (COAXIAL and/or AUX).

4. Make sure you have removed the protective caps from both ends of the optical cable.

CONNECTION VIA BLUETOOTH® WIRELESS TECHNOLOGY

You can conveniently connect the Sound M to your (mobile) device (e.g. a smartphone) via Bluetooth® wireless technology. For this, please proceed as follows: Establish a connection via Bluetooth® wireless technology:

1. Select the Bluetooth® input [BT] by (repeatedly) pressing the arrow key up or down „ / “ on the Smart-remote.
2. Now, press the button „Bluetooth Pairing“ on the Smart remote. The display indicates [BTP].
3. Start the search on your (mobile) device.
4. Select Sound Mxxx as the playback device.
5. The connection is established automatically resp. after confirmation and the message [BT-] followed by [CON] appears on the display of the Sound M.
6. Start playback of a track on your (mobile) device and the sound is automatically played back via the Sound M.
7. If the connection has failed, you receive the message [FAI]. In this case please repeat steps 2 to 5.
8. If the (mobile) device requires a code, enter 0000.
9. If [BT-] and [DIS] appear on the display, your (mobile) device is out of range or logged out.

WIRELESS SPEAKER PAIRING

The Sound M offers you the possibility to connect (pair) up to 3 additional Canton Smart speakers wirelessly to an up to 4.1 home theater system.

Attention:
Before pairing Smart speakers to the Sound M, please make sure that the Smart speaker to be (newly) paired has been disconnected from the power supply for at least 30 seconds.

Connect (pair) Smart speakers wireless ly:

1. Enter the main menu by pressing the „M“ button. Then select the menu item „Wireless Setup“ [WIS] using the up or down arrow key „ / “ and confirm this with the „OK“ button.
2. Confirm the (first) menu item „Wireless Pairing“ [WSP] with the „OK“ key.
3. Select the speaker to be paired using the up or down arrow key „ / “ and confirm your choice with the „OK“ button.
4. Behind the selected speaker, the TV screen shows „Pairing“ and [PIR] is indicated in the display. Now, connect the power cord of the (new) speaker to be connected into the power outlet and/or turn on the power switch of this speaker (if present). After a successful pairing process, the On-Screen Display shows „Connected“ and the diplay of the Sound M as well as the display of the slave speaker indicates [CON].
5. Repeat steps 3 and 4 until all speakers have been paired.
6. If the pairing process has failed, „Fail“ appears on the TV behind the selected speaker and the display shows [FAI]. In this case, please repeat step 3 and 4 and make sure that the speaker to be paired has been disconnected from the mains for at least 30 seconds before initiating the pairing process by pressing the „OK“ button.
   Note:
   In combination with several Canton Smart products (such as the Smart Connect 5.1), the Sound M can also be used as a pure wireless center speaker. In this case, the Sound M is controlled by this Smart product. Please refer to the manual of the relating Smart product for information on the necessary pairing procedure.

ASSIGNING PRESET 1-3
The Sound M is able to assign 3 memory buttons with „presets“. Settings like volume, selected input and settings in the Speaker Setup [SPS] menu (sound settings etc.) can be stored.
Practical tip:
We recommend you to store the settings you have made in the loudspeaker menu during the initial set-up of the Sound M, e.g. regarding loudspeaker levels and distances, sound settings etc., to one of the 3 preset buttons so that your settings are not overwritten by the (neutral) factory settings if you accidentally press one of the preset buttons.
To store resp. recall (sound)settings, please proceed as follows:

1. Please apply the desired settings regarding volume, sound, input etc., and press and hold the memory button „1“, „2“ or „3“ until the corresponding number [P1], [P2] or [P3] is shown in the display and no longer flashes.
2. To recall the settings from these presets, please press the corresponding button „1“, „2“ or „3“ briefly. The settings are then called up.
   Note:
   To delete the settings from a preset button, please press and hold the relating button for 10 seconds until the corresponding preset [P1], [P2] or [P3] is shown in the display rapidly flashing.

FIRMWARE UPDATES VIA USB STICK

The Sound M offers you the possibility of updating the firmware via a USB memory stick. With such an update new functions or adaptations to other devices can be implemented and/or firmware faults (bugs) can be corrected. During the update process, the Sound M is not operable!
WARNING:
Do not disconnect the Sound M from the power supply during an update! To perform a firmware update, please proceed as follows:

1. Open the product page of the Sound M at www.canton.de/en and check for the latest firmware available under the section „Downloads“ in the form of a packed ZIP file. The relating manual for this firmware can also be downloaded there.
2. Find out the firmware version of your Sound M: To do this, enter the main menu by pressing the menu button „M“. Now, use the „ / “ buttons to select the item „System Info“ [INF] and confirm it with the „OK“ button. Confirm the first menu item „Firmware Info“ [FWI] with „OK“. If the firmware displayed under „MCU“ [MCU] is lower and therefore older than the version available on the Canton homepage, we recommend you to perform the firmware update on your Sound M.
3. Open the ZIP file and unpack all files contained into the root directory of an empty FAT32 formatted USB memory stick (with USB-A connector).
4. Disconnect your Sound M from the mains for at least 40 seconds, then insert the USB stick with the files into the USB connector on the back of the Sound M and reconnect it to the mains.
5. Now, the Sound M executes the update automatically. The update is only completed after the Sound M has returned to standby or its normal operating state and responds to the remote control (after approx. 21/2-3 min.).
6. Remove the USB memory stick (only) now.

Attention:
Not every USB stick is accepted by the Sound M and can be used for the firmware update. Please use another FAT32 formatted USB memory stick with a small storage capacity (1GB-4GB) if the update does not start automatically after connecting the Sound M to the mains

Technical Data

FURTHER IMPORTANT INFORMATION
Information on “Intended Use”
The speaker system is designed for indoor use and must not be used outdoors or in a wet environment. Do not make any conversions or modifications to the device. Connect the speaker system as described in the instructions and observe the safety instructions. Only operate the device with the mains voltage and frequency specified on the rating plate.
Information about an environmentally friendly operation
To reduce the power consumption, switch the speaker system to standby mode by pressing the Power „ “ button when not in use. This “saves power” and lowers your electricity bill.

Information about the CE marking
Electrical and electronic devices placed on the market within the European Union must be given a CE mark to indicate that the equipment complies with the applicable requirements (e.g. equipment safety or electromagnetic compatibility).

Disposal instructions
According to the EU Directive on Waste Electrical and Electronic Equipment, devices marked with this symbol must not be disposed of together with municipal waste (household waste). Please inform yourself, if necessary contact your local disposal company or the municipal/city administration about the free disposal for you. It serves the environmental and health protection as well as the saving of (rare) raw materials by recycling.
Batteries must also not be disposed of together with general household waste. They must be collected separately and returned to a battery collection point. Throw empty batteries into the collection container free of charge, for example, those situated at the trade. Improperly disposing of batteries can harm human and animal health and/or the environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>