iHip TW004 TWS Earbuds User Manual
- June 6, 2024
- iHip
Table of Contents
iHip TW004 TWS Earbuds
Introduction
- Dust Net
- LED Indicator
- Multi-Function Button
- Charging Port
Important information
- The earbud(s) will automatically power on when taken out from the charging case.
- Both earbuds will automatically pair to each other when turned on.
- The earbuds will power off if they don’t connect to any device within 5 minutes. If the earbuds turn off, turn the earbud(s) on again by
- putting the earbuds back into the charging case and then take it out to power on. OR
- manually turn it on by long pressing the multi-function button on the earbuds.
Charging your device
Charging your case:
- Plug in the charging case using the Micro USB cable included.
- While the case battery is charging, the case LED indicator will be flashing red.
- When the case is fully charged, the light then will change to solid red.
Charging your earbuds:
- Place the earbuds inside of the charged case. The earbuds will automatically start charging once placed in the charged case.
- A solid Red light on the earbuds will indicate that the earbuds are charging.
- Once fully charged, a Blue light will turn on for 1 minute and then turn off.
NOTE: The earbuds and case can be charged simultaneously, but the earbuds will not charge if there is no power in the case. The case needs to have at least a minimum charge to charge the earbuds
Pairing Your Earbuds
- Turn on the Bluetooth on your device
- Choose “SOUNDPODS” on your list to connect
When the LED is off, they are paired successfully
There will be a reminding voice saying “connected”
Bluetooth usage
Making phone calls:
Be sure the earbuds are connected with your mobile phone. Once connected you can make phone calls. When making calls both earbuds will be working.
- To answer a call ,__ short press the earbud Multi-function button one time.
- To reject calls ,__ long press the the earbud Multi-function button two seconds.
- When the earbuds are in music mode, you can dial the last number by quick pressing the earbud Multi function button twice.
Listening to music:
Be sure the earbuds are connected with your mobile phone. You can listen to
music on your music list. Short press the earbud Multi-function button to stop
the music; to replay press again.
Power off
Long press the earbud Multi-function button until the LED red light is no
longer red, then the Bluetooth device is turned off. The earbuds turn off
automatically when earbuds are away from Bluetooth device for a duration of
over 5 minutes.
Low battery
When the battery is low, there will be a reminding beep tone.
Specifications
Package Contents
- 1(One) Built Tough SoundPods (2.1 1 x 2.34 x 1.03 in) (5.35×5.95×2.62cm)
- 1(One) Carabiner (1.75 x 0.9in) (4.45 x 2.29cm)
- 1(One) Micro-USB Charging Cable 1Ft. (.31m)
Features
- Built-in microphone
- High-quality sound with extra bass
- Up to 12hrs of play and charge time
- Connect wirelessly to iOS & Android devices
- Ergonomic design for a comfortable fit in your ear
Stereo earbuds with wireless connection. Left and right channel separation, HIFI sound. Dual band Bluetooth® connection allows you to use the SoundPods together or individually.
Attention
- Handle with care. Do not throw, sit on, or store the SoundPods under heavy objects. Keep away from high temperatures and environments with high humidity. Store in an environment with a temperature between -10°C – 60°C.
- Keep away from high frequency transmitting equipment such as WIFI routers which may cause sound interference or disconnection.
- Please keep the earbuds within a 10m (33 ft) range of the connected device.
- This product is a compatible with both iOS® and AndroidTM devices.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
2022 Zeikos, Inc. iHip is a trademark of Zeikos, Inc., Registered in the U.S.
and other countries. The illustrated product and specifications may differ
slightly from that supplied. iOs, iPod, iPhone and iPad are trademarks of
Apple Inc., The “Android” name, the Android logo, and other trademarks are
property of Google LLC. , Registered in the U.S. and other countries. The
illustrated product and specifications may differ slightly from that supplied.
All other trademarks and trade names are those of their respective owners.
United States and international patent pending. All Rights Reserved. For ages
12+up. This is not a toy. For warranty information please visit
www.ihip.com. Designed by iHip, Manufactured in China.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by “iHip” is under license.
Other trademarks and trade names are those of their respective owners.
Limited One Time Warranty.
To activate your product warranty go to our website.
www.iHip.com & register
this product