iHip WMSOUNDPOD-W SoundPods Wireless Earbuds User Manual

iHip WMSOUNDPOD-W SoundPods Wireless Earbuds

Turn on both earbuds

Take both earbuds out of the case. The earbuds will turn on and pair to each other automatically.

Pair the earbuds with your device

Turn on Bluetooth on your device and choose “SOUNDPODS” from your list to connect. When the LED slowly flashes blue, they are paired successfully. There will be a reminding voice saying “connected.”

Bluetooth usage

• Making phone calls: Be sure the earbuds are connected to your mobile phone, Once connected you can make phone calls. When making calls, both earbuds will be working if you’re using both earbuds.

  • To answer a call , short press the power button one time.
  • To reject calls. long-press the power button for two seconds,
  • Dial the last number by a quick pressing on the Power button twice when the earbuds are in music mode.

• Listening to music:
  Be sure the earbuds are connected to your mobile phone. You can listen to music on your music list.

  • Short press the Power button to stop the music; to replay press again,

• Power off: Long press the Power button until the LED red light is no longer red, then the Bluetooth device is turned off. The earbuds turn off automatically when the earbud is away from the Bluetooth device for a duration of over 5 minutes.

• Low battery: When the battery is low, there will be a reminding voice saying “Battery Low”

Important information

The earbud(s) will automatically power on when taken out from the charging case. Both earbuds will automatically pair to each other when turned on. The earbuds will power off if they don’t connect to any device within 5 minutes. If the earbuds turn off, turn the earbud(s) on again by:

• putting the earbuds back into the charging case and then take it out to power on.
• manually turn it on by long-pressing the multi-function button on the earbuds.

NOTE: The case must be charged in order to charge the earbuds. The earbuds will not charge while the case is charging. The earbuds and case do not charge simultaneously.

Specifications

• Bluetooth version: V5.1
• Bluetooth range: 10 meters
• Bluetooth frequency: 2.4GHz
• Battery Capacity:
• Earbud: 40mAh rechargeable Li-ion battery
• Charging dock: 400mAh rechargeable
• Li-ion battery Standby time: up to 24 hours
• USB cable length: 50cm

1. Dust Net
2. LED Indicator
3. Multi-Function Button
4. Charging Port

• built-in microphone
• high-quality sound with extra bass
• 2 hours of listening on a one-time charge
• connect wirelessly to iOS & Android devices
• ergonomic design for a comfortable fit in your ear

2020 Zeikos, Inc. iHip is a trademark of Zeikos. Inc., iPod, iPhone and iPad are trademarks of Apple Inc., The “Android name, the Android logo, and other trademarks are property of Google LLC., Registered in the U.S. and other countries. The illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade names are those of their respective owners, United States, and international patent pending. All Rights Reserved. For ages 12+up. This is not a toy. Designed by iHip, Manufactured in China. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG. Inc. and any use of such marks by “iHip is under license, Other trademarks and trade names are those of their respective owners Limited One Time Warranty. To activate your product warranty go to our website. www.iHip.com & register this product.

Attention:

1. Handle with care. Do not throw, sit on, or store the SoundPods under heavy objects. Keep away from high temperatures and environments with high humidity. Store in an environment with a temperature between -10’C and 60’C.
2. Keep away from high-frequency transmitting equipment such as WIFI routers which may cause sound interference or disconnection.
3. Please keep the earbuds within a 1Om (33 ft) range of the connected device.
4. This product is compatible with both iOS® and Android M devices.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>