ECOVACS GOAT GX-600 Auto Lawn Mower Robot Instruction Manual
- August 13, 2024
- ECOVACS
Table of Contents
ECOVACS GOAT GX-600 Auto Lawn Mower Robot
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
- Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the appliance. Please understand that you can reduce the risk by following the instructions and warnings in this manual, but you cannot eliminate all the risks.
- Lawn Mowing Robot (hereinafter referred to as “GOAT”} has many built-in safety sensors, however, safety risks still exist.
- All related residual risks have been described or informed in this manual.
- Description of intended use: Intelligent lawn mowers are mainly used in mowing grass, especially in parks, private villa yards, and football fields.
- For machines used in public areas, that warning signs shall be placed around the working area of the machine. They shall show the substance of the following text: WARNING! Automatic lawnmower!
- Keep away from the machine! Supervise children!
- DO NOT modify the mower by yourself. Modifications could interfere with mower operations, result in serious injury and/or damage, or void the Limited Warranty. Use only Ecovacs approved parts and accessories.
WARNING
- Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator.
- To avoid using the machine and its peripherals in bad weather conditions especially when there is a risk of lightning.
- Before each mowing session, check that all parts of the mower can function normally.
- Periodically inspect the area where the machine is to be used and remove all stones, sticks, wires, bones, and other foreign objects.
- NEVER allow children to touch the power supply unit, charging station, blades, the battery compartment, or any parts with gaps such as the wheels.
WARNING
- Never to operate the machine and/or its peripherals with defective guards or shields, or without safety devices, or if the cord is damaged or worn.
- Keep away from the rotating blades! DO NOT put hands or feet under or near the rotating blades.
- Keep a safe distance from the mower when operating.
- DO NOT overreach. Keep your balance at all times and always be sure of the footing on slopes. Walk, never run while operating the machine or its peripherals.
WARNING
- Never allow children to be in the vicinity or play with the machine when it is operating.
WARNING
DO NOT touch moving hazardous parts before they have come to a complete stop.
WARNING
For the purposes of recharging the battery, only use the detachable supply
unit provided with this appliance (CH2203B).
This appliance contains batteries that are only replaceable by skilled
persons.
Safe Usage:
Not to connect a damaged cord to the supply or touch a damaged cord before it
is disconnected from the supply for the reason that damaged cords can lead to
contact with live parts; keep extension cords away from moving hazardous parts
to avoid damage to the cords which can lead to contact with live parts; to
connect the machine and/or its peripherals only to a supply circuit protected
by a residual current device (RCD) with a tripping current of not more than
30 mA.
Unplug the Power Supply from the power socket and then untangle when the power
cord or the extension cable is damaged or entangled during use. During the
operation, pull the body of the plug rather than the cord to avoid the hazard.
Contact Customer Service and let the skilled professional to repair or replace
the cord.
- Please use the extension cable manufactured by ECOVACS. If you have any problem, contact Customer Service.
- If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Press the STOP Button at once when the mower makes the abnormal sound or raises the alarm.
- In case of leakage of electrolyte flush with water or neutralizing agent, ask for medical help once it gets contact with the eyes etc.
- If there are abnormal vibrations, please restart the mower. If the problem persists, please Contact Customer Service.
Instructions to always wear substantial footwear and long trousers while
operating the machine with a manual controller.
Additionally when using the manual controller
- Mow only in daylight or in good artificial light.
- Avoid operating the machine in wet grass. c) Do not operate the machine when barefoot or wearing open sandals. Always wear substantial footwear and long trousers.
- Always be sure of your footing on slopes. e) Use extreme caution when reversing the machine towards you. f) Always switch on the motor according to instructions with feet well away from the blade(s).
Device Update
Typically, some devices are updated bi-monthly, but not always so specific.
Some devices, especially those that went on sale more than three years ago,
will only be updated if a critical vulnerability is found and fixed.
European Union Compliance Statement
Information on Disposal for Users of Waste Electrical & Electronic Equipment
-
This symbol on the product or on its packaging indicates that used electrical and electronic products should not be mixed with unsorted municipal waste. For proper treatment, it is your responsibility to dispose of your waste equipment by arranging to return it to designated collection points.
-
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
-
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased, which is free of charge, please contact your local authority
for further details of your nearest designated collection point. -
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
Information on Disposal for Users of used batteries
-
This symbol means that batteries and accumulators, at their end-of-life, should not
be mixed with unsorted municipal waste. Your participation is an important part of the effort to minimize the impact of batteries and accumulators on the environment and on human health. For proper recycling you can return this product or the batteries or accumulators it contains to your supplier or to a designated collection point, which is free of charge. -
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
-
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. there are separate collection systems for used batteries and accumulators.
-
Please, dispose of batteries and accumulators correctly at your local community waste collection/recycling center.
Restriction of the use of certain hazardous substances (RoHS) Directive
Ecovacs Home Service Robotics Co., Ltd. hereby declares the whole product
including parts (cables, cords, and so on) meets the requirements of RoHS
Directive 2011/65/EU and amendment Commission Delegated Directive (EU)
2015/863 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (“RoHS recast” or “RoHS 2.0”).
Radio Equipment Directive
Ecovacs Home Service Robotics Co., Ltd. hereby declares that the product
listed in this section comply with the essential requirements and other
relevant provisions of the Radio Equipment Directive 2014/53/EU.
Machinery Directive
Ecovacs Home Service Robotics Co., Ltd. hereby declares that the product
listed in this section comply with the essential requirements and other
relevant provisions of the Machinery Directive 2006/42/EC.
Europe Authorised Representative:
C E ECOVACS Europe GmbH
Ecovacs Home Service Robotics Co., Ltd. hereby declares that the product
comply with the essential requirements and other relevant provisions of the Ro
HS Directive 2011 /65/EU and amendment Commission Delegated Directive (EU)
2015/863, the Radio Equipment Directive 2014/53/EU and the Machinery Directive
2006/42/ EC.
The declaration of conformity can be viewed at the following address: https://www.ecovacs.com/global/compliance
SYMBOLS
Sensors
MAINTENANCE
In order to get the best mowing performance and prolong GOAT’s service life, it is necessary to clean and check your GOAT every now and then. The contents below will tell you how to maintain your GOAT.
WARNING
- REMEMBER TO POWER OFF GOAT BEFORE OPERATION.
- ALWAYS WEAR PROTECTIVE GLOVES WHEN REPLACING THE BLADES AND PERFORMING CLEANING.
Regular Maintenance
To keep GOAT running at peak performance, perform maintenance tasks and
replace parts with the following frequencies:
Specific Maintenance
Replace the Blades
WARNING
Remember to power off GOAT before operation. ALWAYS wear protective gloves
when replacing the Blades. Please only use the Blades manufactured by ECOVACS
and use new screws when assembling Blades.
- Power off GOAT.
- & GENTLY TURN GOAT OVER ON A SOFT SURFACE.
- Loosen the Screws with the screwdriver.
- Remove the Screws and Blades.
- Tighten the new Blades and Screws. Make sure that the Blades can spin freely.
Clean the Blade Disc, Chassis, Off-road Wheels and Front Wheels
WARNING
ALWAYS wear protective gloves. DO NOT use the high pressure washer. High
pressure water can enter the sealings and damage electronic and mechanical
parts.
- Power off GOAT.
- GENTLY TURN GOAT OVER ON A SOFT SURFACE.
- Clean the Blade Disc and the chassis with a brush.
- Check that the Blade Disc can rotate freely and Blades can spin freely.
- Clear the mud from the Off-road Wheels and Front Wheels by using a brush to have a fine grip.
Clean the Other Components
Wipe the components with a clean, dry cloth. Avoid using cleaning sprays or
detergents.
STORAGE OVER THE WINTER
GOAT
- Power off your GOAT after it is fully charged.
- Clean it thoroughly.
- Store in a cool, well-ventilated and dry place indoors.
Station
- Unplug the Power Supply from the power socket.
- Disconnect Power Supply from the Station.
- Store the Station and Power Supply in a cool, well-ventilated and dry place away from direct sunlight.
TRANSPORTATION
It is recommended to use the original package to protect GOAT when you intend
to transport GOAT for a long distance. Remember to power off your GOAT before
carrying out any transportations and handle it gently. DO NOT pick up your
GOAT while it is still running or in the Station.
How to pick up your GOAT properly?
Pick up your GOAT by holding the handle and the head at the same time. Make
sure that the Blade Disc faces towards the ground.
BATTERY
For long-time storage, it is recommended to charge GOAT every 6 months. The
Limited Warranty does not cover battery damage caused by over-discharge. The
battery CANNOT be charged when the ambient temperature is above 40°C / 104° F
or below 5°C / 41 ° F. The recommended temperature for GOAT operation is
between 5-40°C / 41 -104 ° F. The storage temperature range is -20-75°C /
-4-167° F.
Note: The life-span of GOAT’s battery depends on the frequency of usage and
the total hours of use. It is also non-rechargeable. DO NOT dispose disused or
faulted battery casually. Check with your Local Authority for advice.
FUNCTION MESSAGES
This part will tell you the explanation about function messages GOAT displays.
FAULT MESSAGES
Smart as GOAT, it will tell you the errors when things go wrong so that you can find the way to fix them. See the table below for the detailed information.
TROUBLESHOOTING
If there is something wrong with your GOAT when working, you can consult the table below. Please contact our Customer Service if the problems still exist.
TECHNICAL DATA
Note: Technical and design specifications may be changed for continuous product improvement. Explore more accessories at https://www.ecovacs.com/global
Need Help?
Save the trouble for return. Contact us, we are here to help!
Ecovacs Home Service Robotics Co., Ltd.
No.518 Songwei Road, Wusongjiang Industry Park, Guoxiang Street, Wuzhong
District, Suzhou, Jiangsu, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>