TECKNET TK-WD006 Doorbell User Manual

Doorbell

Model: TK-WD006
User Manual

Package Contents

Doorbell Receiver x 1
Push Button x 1
User Manual x 1
Double-sided Tape x 1
Screw x 2
Luminous Signs Card it 1

Product Overview

1. Volume Setup Button
2. Previous Tune
3. Next Tune
4. LED light
5. Push Button
6. Detach the Battery Cover Here

Specifications

1. Receiver
   Input Voltage: ACI00.240V 50/60Hz
   Power consumption: 1.5 W

2. Punk Button
   Battery: DC 3V (CR2032 xl)
   Working Current: 17mA
   Transmission Power. 10dBm

Install Push Button

1. Remove the battery isolation strip on the back of the push button before use.
2. Use the Included double•slded tape to stick the push button to the wall.
   

How to Use

1. Press the Volume Setup Button to switch between 5 volume levels (mute – max volume). Press and hold the Volume Setup Button for over 3 seconds to turn the LED light mode on or off.

2. Press the Next Tune or Previous Tune button to select a doorbell tune.

3. Pairing Method
   3.1. Select your favorite tune.
   3.2. Press and hold the Previous Tune button for at least 3 seconds until the LED light turns on.
   3.3. Press the Push Button once, and the receiver will beep. Wait for the LED light to go out and the pairing is complete.

4. Press and hold the Next Tune button for at least 3 seconds until the LED light turns on. Wait for the light to turn off, and for the pairing record to be cleared.

5. There is a prompt tone when the receiver is plugged in for the first time. This indicates the power is on.

6. Indicator light: The light will flash while the tune is playing on the receiver. The LED light on the push button will light up when it is pushed.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.

| 1. RETAIN THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
---|---
| 3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
| 4. Children should be supervised to ensure that they do not play with the appliance.
|   5. Keep the product away from the fire to avoid an explosion.
6. For proper insertion, please observe polarity indicators (+/-).
| 7. Do not place the product in or near an inflammable, explosive, or hazardous object.
8. Do not operate the product with a damaged cord or plug.
|  9. Do not operate the product if it has been damaged in any way.
10. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
|  11. Do not throw or shake the product.
12. Do not place the product in or near water, rain, excess moisture, or extreme heat.

Limited 12-Month Warranty

What does this warranty cover.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unchain”) warrants to the original purchaser of this TECHNET product that the product shall be free of defects in design, assembly, material, or workmanship.
What is the period of coverage is.
Unchain warrants the TECHNET product for 12 Months.
What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the TECHNET product is not provided to Unchain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECHNET product has been improperly installed, altered in any way, or tampered with. The TECHNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear, and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit the TECHNET website or email [email protected] for more information. To extend the warranty period, please visit the TECHNET website and register your TECHNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Correct Disposal of This Product

( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-WD006 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>