TECKNET EWM011073 Wireless Mouse User Manual
- June 6, 2024
- TECKNET
Table of Contents
TECKNET EWM011073 Wireless Mouse
Package Contents
Button instructions
- Left-click button
- Scroll wheel
- Right-click button
- DPI Switch button
- Forward button
- Back button
- Receiver
Product Specifications
- Working current: <18mA
- Working voltage: 1.5V
- Battery type: One AA battery (not included)
- DPI: 800/1200/1600/2400
- Receiver range: <8m
- 2.4G interface return rate: 250Hz
System Requirements
- Systems compatible: Windows7/8/8.1/10, MAC
Instructions
- Open the battery cover on the underside of the mouse.
- Remove the receiver, install the battery according to the battery positive and negative poles, and replace the battery cover
- Insert the receiver into the USB port on the computer, the computer system will automatically detect it, and run it after preparation.
- The mouse will enter the sleep state after not being used for a period of time, and can be awakened by moving or pressing any key.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS
- SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories, and device using our product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion may occur.
- Do not place the product in or near an inflammable, explosive or hazardous object.
- Do not place in or near water, rain, excess moisture or extreme heat.
- Do not operate the product with damaged cords or plugs.
- Do not operate the product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product..
Limited 18-Month warranty
What does this warranty cover?
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unchain”) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship
What is the period of coverage is?
Unchain warrants the TeckNet product for 18 Months.
What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TeckNet product is not provided to Unchain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty?
Please contact retailers or visit the TeckNet website www.tecknet.co.uk for more information.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>