TECKNET EWM01576 Wireless Mouse User Manual

TECKNET EWM01576 Wireless Mouse

Package Contents

Button Instructions

1. Left-click button
2. Scroll wheel
3. Right-click button
4. LED charging indicator
5. DPI Switch button
6. Forward button
7. Back button
8. Charging port
9. Power switch
10. Receiver

Product Specifications

• Working current:  <3mA
• DPI:    800/1200/1600/2000/2400DPI
• Receive distance:  <10m
• Battery capacity:   300mAhmAH
• Charging Cable:  Type·C
• Transmission Power:  1.SdBm

System compatible
Windows7/8/8.1/mac0S/Android (Note: for macOS, the side buttons cannot be used.)

Charging method

1. Connect the charging cable supplied with the mouse to charge it. Connect the USB Type-C connector to the charging port of the mouse and the USB A connector to a USB port such as a PC as shown below.
2. Charging is complete when the LED turns off. Please unplug the charging Cable. (Charging time is about 3 to 4 hours)

The status of charging can be seen with the following LED indicators. Red: The battery is low Orange: Charging Off: Charging is complete

Tips:
Even if the power switch is turned on, if the mouse has not been used for a period of time, the mouse will go to sleep. Click the mouse to return to the working state. (There may be a slight delay in the initial recovery).

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS

1. SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
3. This appliance is not intended for use by persons (including children) with the reduced physical. sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from fire or explosion may occur.
6. Do not place the product in or near an inflammable, explosive or hazardous object.
7. Do not place in or near water, rain, excess moisture or extreme heat.
8. Do not operate products with damaged cords or plug.
9. Do not operate the product if it has been damaged in any way.
10. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
11. Do not throw or shake the product.

Limited 12-Month Warranty

What does this warranty cover.

Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.

What is the period of coverage is
Uni chain warrants the TECKNET product for 12 Months.

What will we do to correct problems?
Uni chain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided to Unchain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit TECKNET website or email [email protected] for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase. Specifiche del Pradotto: Corrente di funzionamento: <3mA

Disclaimer

Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user·s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type EWM01576 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.tecknet.com/sup­port.

References

• TECKNET EU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>