TECKNET TKHS006 Wireless Headset User Manual

TECKNET TKHS006 Wireless Headset

Thank you for purchasing TECKNET Wireless Headset. Please read this User Manual thoroughly before use of the product and retain it for future reference. If you have any problem using this Wireless Headset, please contact us by email at support@tecknet.com.

Package Contents

• Wireless Headset *1
• 3.5mm Audio Cable *1
• USB-A to USB-C Charging Cable *1
• User Manual *1

Product Overview 

1. Volume +
2. MFB
3. Volume –
4. LED Indicator Light
5. On/Off Button
6. Microphone
7. AUX Input
8. USB-C Charging Port

SPECIFICATIONS

1. Connection: BT or Wired
2. BT Version: V5.0
3. Supported Protocols: HFP V1.7, A2DP V1.3, AVRCP V1.6
4. Operation Range: 10 meters
5. Standby Time: approx. 600 hrs
6. Operating Time (music): approx. 36 hrs (70% volume)
7. Talk Time: approx. 37 hrs (709% volume)
8. Charging Time: approx. 2.5 hrs
9. Input: DC 5V=1A
10. Battery Capacity: 600mAh
11. Battery Voltage: 3.7V
12. Operating Temperature: 14°F to 113 °F (-10°C to 45°C)
13. Charging Cable Length: 11.8 in (30 cm)
14. Audio Cable Length: 47 in (120 cm)

Charging the Headset

1. When the LED indicator flashes RED, please charge the headset.
2. Connect the USB-C end of the charging cable to the headset and the USB-A end to a booted PC, charger, or power bank. The LED indicator lights in steady RED.
3. Charging is completed in about 2.5 hours. The LED indicator lights in steady BLUE when the headset is fully charged.

Notes:

1. If the headset will not be used for a long haul, fully charge the battery at least once every 2 months.
2. When the battery voltage is lower than 3.3V, you will hear “Low Battery” once every 30 seconds.

Pairing Methods

A. BT Pairing

1. Turn on Bluetooth on your phone.
2. Press and hold the On/Off Button for 2 seconds to power on the headset. You will hear “Power on. Pairing’, and the LED indicator flashes blue and red alternately.
3. Search and tap to connect to “TK-HSO06” on the Bluetooth device list of your phone. Then you will hear “Connected”. The LED indicator will flash blue every 6 seconds after the headset is paired. The phone shows that “TK-HSO06” is connected.

Note: The headset can also be connected to a computer by following the above.

To Pair with Two Phones

1. Follow the above pairing guide to connect the headset to phone A, then switch off the Bluetooth function of phone A.
2. At this point, the headset automatically enters pairing mode.
3. Search and click to connect to “TK-HS006” on the Bluetooth device list of phone B.
4. After the headset is paired with phone B, switch on the Bluetooth function of phone A and tap “TK-HSO06” to reconnect to the headset. Now the headset is connected with two phones.

Note:
When the headset is paired with two phones, musiC can only be played from one. If you want to play music on the other connected phone, pause or stop playing the music on the previous one. If you want to answer a new call from the other connected phone, hang up the current call on the previous one.

Wired Connection
Plug one end of the 3.5mm audio cable into the AUX Input port on the headset and the other end into that of your phone/computer. Then you can use the headset as a high-quality Wired headset without powering on.
Note: When connected with the audio cable in the power-on state, the headset will shut down automatically. If you need to use BT connection, unplug the audio cable and power on the headset, then follow the BT Pairing” Steps.

OPERATION INSTRUCTIONS

LED Indicator Light

VOICE PROMPT

FAQS

Q: What should I do if the soung cuts in and out?

1. Make sure to use the hea (10 meters).
2. Keep the headset away from devices such as microwa
3. If the battery of the headset is low please fully charge ir before Use.

Q: How to reconnect the he reconnect?

1. When TK-HSOO6 is pairec reconnect to the paired deu every time it powers on. If pairing again. It will power minutes.
2. When the headset goes c “Disconnected”. It will reoperation range.
3. To avoid reconnection failure, keep the headset away from electromagnetic interference devices Such as microwave ovens, base stations, etc.

Q: What devices can recharge the headset?
A: Any charger, car charger, power bank, PC, etc. with DC 5V/above output.

Q: What to do ifI cannot turn the power on?
A: Check if the headset is in low battery state (red light flashes slowly) If it is, recharge the headset. Turn on the headset again after it is fully charged (steady blue light). If this does not help, you may contact our customer service Tor more support.

Q: What to do if Ifail to pair the headset with my devices?

1.  Turn off the power of the headset, and then turn it back on. Pair the headset with your device again.
2. If the above methods do not help. you may contact our customer service for more Support.

Q: Why does the headset power of automatically?
A: When the headset is not connected over 10 minutes or the battery is too low, the headset will power off automatically.

Q: How to clean the headset?
A: Use a soft cloth to wipe off dust. Do not use any detergent to clean the headset.

Q: Can I use the headset with the audio cable only but without BTfunction?
A: Yes, you can use it as a high-quality wired headset without powering on. when connected with the audio cable in the power-on state, the headset will shut down automatically. If you need to use B connection, unplug the audio cable and power on the headset, then follow the “BT Pairing” steps.

Limited 12-Month warranty

What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
Al above warranties are null and void if the TECKNEI product is not provided to Unichain for inspection upon Unichain’s request at thesole expense of the purchaser, or if Unichain determines that the TechNet product has been improperly installed, altered in any way, ortampered with. The TECKNET Product Warranty does not protectagainst acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion,DDsolescence, abuse, damage due to low voltage disturbances (eg.brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit TECKNET website or email support@tecknet.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product
(Waste Electrical& Electronic Equipment) This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.Household user should contact either the retailer where they purchased this product, or their local government office, for details off where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-HS006 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.tecknet.com/support

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsiblefor compliance could void your authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE instructions.

1. RETAIN THESE INSTRUCTIONS -This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
3. Children should be supervised to ensure that they do not play with the appliance.
4. Keep the product away from the fire to avoid an explosion.
5. Do not place the product in or near an inflammable, explosive or hazardous object.
6. Do not operate the product with a damaged cord or plug.
7. Do not operate the product if it has been damaged in any way.
8. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
9. Do not throw or shake the product.
10. To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>