TECKNET TK-HS008 Wireless Headphones User Manual

TK-HS008 Wireless Headphones
User Manual

Congratulations

Thank you for purchasing TECHNET Wireless Headphones. Please read this User Manual thoroughly before use of the product and retain It for future reference. If you have any problem using these Wireless Headphones. please contact us by email at support@tecknetonline.com

Package Contents

Product Overview

Specifications

1. Connection: BT or Wired
2. ST Version: V5.0
3. Supported Protocols: HFP V1.7, A2DP V1.3, AVRCP V1.6
4. Operation Range: 10 meters
5. Input: DC 5V 1A
6. Battery Capacity: 600mAh
7. Battery Voltage: 3.7V
8. Operating Temperature: 147 to 113 7 F(-10ºC to 45C)
9. Transmission Power: 6dBm

Some parameters may vary due to the environment and the time of music played.

Charging the Headphones

1. When the LED indicator flashes RED. please charge the headphones.
2. Connect the USB-C end of the charging cable to the headphones and the 058-A end to a booted PC. charger. or power bank.The LED indicator lights in steady RED.
3. Charging is completed in about 2.5 hours. The LED indicator lights in steady BLUE when the headphones is fully charged.

Notes:

1. If the headphones will not be used for a long haul fully charge the battery at least once every 2 months.
2. When the battery voltage is tower than 3.3V, you will hear ‘Battery Low” once every 30 seconds.

Pairing Methods

A. BT Pairing

• Turn on Ettuotooth on your phone.
• Press and hold the On/Off Button for 2 seconds to power on the You will hear “Power on. Pairing”, and the LED indicator flashes blue and red alternately.
• Search and tap to connect to “TK-145008′ on the Bluetooth device list of your phone. Then you will hear “Connected’. The LED indicator will flash blue every 6 seconds after the headphones is paired. The phone shows that “TK-HS0013` is connected.

Notes:
The headphones can also be connected to a computer by following the above steps.

To Pair with 2 Mobile Devices

You may pair the headphones with 2 mobile devices (e.g. phones or tablets) by the following steps:

1. Follow the above pairing guide to connect the headphones to device A, then switch off the Bluetooth function of device A.
2. At this point, the headphones automatically enter pairing mode.
3. Search and click to connect to “TK-HSO08” on the Bluetooth device list of device B.
4. after the headphones are paired with device B, switch on the Bluetooth function of device A, and tap “TX-115008” to reconnect to the Now they head pf ones are connected with the two devices.

Notes:
When the headphones are paired with two devices, music can only be played from one. If you want to play music on the other connected device, pause or stop playing the music on the previous one. If you want to answer a new call from the °the• connected phone, hang up the current call on the previous one.

B. Wired Connection

Plug one end of the 3 5mm audio cable into the AUX input port on the headphones and the other end into that of your phone/computer. Then you can use the headphones as 3 high-quality wired headphones without powering on.

Notes:
When connected with the audio cable In the power-on state, the headphones will shut down automatically. If you need to use ST connection, unplug the audio cable and power on the headphones. then follow the –BT Pairing” steps.

Operation Instruction

Button

| Function|

Operation Instructions

---|---|---
Dn/Off Button & MFB| Power on| Press and hold me On/Off Button for 2 seconds.
Power off| Press and hold the On/Off Button for 3 seconds.
Answer a call| Short press the MFB to answer an
incoming call.
Hang up a call| Short press the MFB to hang up a call
Cancel dialing| Short press the MFB to cancel dialing,
Reject a call| Press and hold the MFB for 2 seconds to reject an incoming call.
Audio switching| During a call, press and hold the MFB for 2 seconds to switch between the headphones and the phone speaker.
Redial a call| Double press the MFB to dial the last number dialed.
Play/Pause| Short press the MFB to play/pause music.
On/Off Button & MFB| Call waiting| To answer a new call and keep the current call, short press the MFB.
| To keep the current call and reject the new call, press and hold the MFB for 2 seconds.
| To alternate between the current calL and the kept call, short press the MFB.
| To switch to the kept call and hang up the current call, press and hold the MFB for 2 seconds.
EQ Button| EQ mode| When playing music, short press the EQ Button to choose from Pop mode, Bass mode, or Vocal mode.
Voice assistant| Double press the EQ Button to activate the voice assistant on your phone. (Only in the non-calling state)
Volume +| Volume up| Press the Volume + button. (When the volume reaches the top level, you will hear an alert.)
Next track| Press and hold Volume + for 2 seconds.
Volume-| Volume down| Press the Volume – button,
Previous track| Press and hold Volume – for 2 seconds.
Gear pair record| Press and hold the Volume + and Volume — for 2 seconds to clear the pair record in the headphones. When it is cleared, the headphones will no be reconnected automatically and you need to establish the connection again.

LED Indicator

Mode

|

LED Indicator

---|---
Power on| Red & Blue light flash alternately
Power off| Red light turns on for 1 second
Pairing mode| Red Et Blue tight flash alternately
Connected standby mode| Blue light flashes once every 6 seconds
Disconnected| Red b Blue light flash alternately
Playing Music| Blue light flashes once every 6 seconds
Talking| Blue light flashes once every 6 seconds
Pair record cleared| Blue and Red LED light up for 1 second, then flash alternately
Low battery| Red light flashes slowly
Charging| Steady Red light
Fully charged| Steady Blue light

Voice Prompt

Status

|

Voice Prompt

---|---
Power on| Power on
Power off| Power off
Pairing mode| Pairing
Pair success| Connected
Headphones connected| Connected
Headphones disconnected| Disconnected
Low battery| Battery Low
Clear pair record| Clear matching record
Pop Mode| Pop Mode
Bass Mode| Bass Mode
Vocal Mode| Vocal Mode

FAQs

Q: Can I use the headphones with the audio cable only but without BT function?
A: Yes, you can use it as a high-quality wired headphone without powering it on. When connected with the audio cable in the power-on state, the headphones will shut down automatically. If you need to use a BT connection, unplug the audio cable and power on the headphones, then follow the “BT Pairing” steps.

Q: What should I do if the sound cuts in and out?
A:

1. Make sure to use the headphones within the effective operation range (10 meters).
2. Keep the headphones away from electromagnetic interference devices such as microwave ovens, base stations, etc.
3. If the battery of the headphones is low, please fully charge it before

Q: Now to reconnect the headphones and what to do when it fails to reconnect?
A:

1. When TK-115008 is paired with your device successfully, it will reconnect to the paired device automatically within 10 minutes every time it powers on If the reconnection failed, please try pairing again. It will power off if reconnection failed over 10 minutes.
2. When the headphones go out of operation range, you will hear “Disconnected”. It will reconnect automatically after entering the operation range.
3. To avoid reconnection failure, keep the headphones away from electromagnetic interference devices such as microwave ovens, base stations, etc.

Q: What devices can recharge the headphones?
A: Any charger, car charger, power bank, PC, etc. with DC 5V/above 1A output.

Q: What to do if 1 cannot turn the power on?
A: Check if the headphones are in a low battery state (red light flashes slowly). If it is, recharge the headphones. Turn on the headphones again after it is fully charged (steady blue light). If this does not help, you may contact our customer service for more support

Q: What to do if I fail to pair the headphones with my devices?
A:

1. Turn off the power of the headphones, and then turn it back on Pair the headphones with your device again.
2. If the above methods do not help, you may contact our customer service for more support.

Q: Why do the headphones power off automatically?
A: When the headphones are not connected for over 10 minutes or the battery is too low, the headphones will power off automatically.

Q: How to clean the headphones?
A: Use a soft cloth to wipe off dust. Do not use any detergent to clean the headphones.

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-HS008 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following Internet address: https://eu.tecknetonline.com

Precautions

Note on static electricity
Static electricity accumulated in the body may cause mild tingling in your ears. To minimize the effect, wear clothes made from natural materials.

Others

1. Do not place this headset in a place exposed to humidity, dust, soot, or steam, or subject to direct sunlight. Do not leave the headset in a car for a long time. It may cause a malfunction.
2. Listening with this headset at a high volume may affect your hearing. For traffic safety, do not use this headset while driving or cycling.
3. Do not use the headset in places where it would be dangerous if you are unable to hear ambient sounds, such as at railroad crossings, train station platforms, pedestrian crossings, and construction sites.
4. Do not put weight or pressure on this headset as it may cause the headset to deform during long storage.
5. 5 Do not subject the headset to excessive shock.
6. Clean the headset with a soft dry cloth.
7. Do not expose the headset to water. The headset is not waterproof. Remember to follow the precautions below.
8. Be careful not to drop the headset into a sink or other container filled with water.
9. Do not use the headset in humid locations or in bad weather, such as in the rain or snow.
10. Do not get the headset wet. If you touch the headset with wet hands or put the headset in a damp article of clothing, the headset gets wet and this may cause a malfunction of the headset.
11. If you have any questions or problems concerning this headset that are not covered in this manual, please contact us by email at support@tecknetonline.com

Limited 12-Month warranty

What does this warranty cover?
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unchain”) warrants to the original purchaser of this TECHNET product that the product shall be free of defects in design, assembly, material, or workmanship.

What is the period of coverage is?
Unchain warrants the TECHNET product for 12 Months. What will we do to correct problems?

Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
All above warranties are null and void if the TECHNET product is not provided to Unchain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECHNET product has been improperly installed, altered in any way, or tampered with. The TECHNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear, and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product ****( Waste Electrical Electronic Equipment )
This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Note:
This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

support@tecknetonline.comhttps://www.tecknetonline.com

References

• BestShop | Best Price, Smart Shopping

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>