TECKNET Wireless Doorbell Waterproof Wall Plug-in Cordless User Manual

: June 5, 2024
: TECKNET

Table of Contents

TECHNET Wireless Doorbell Waterproof Wall Plug-in Cordless
product Layout
package Contents
product Features
product Specification
Receiver Instructions
Maintenance
IMPORTANT SAFETY INSTRUCTION-CAREFULLY FOLLOW THESE INSTRUCTIONS
Limited 18-Month Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TECHNET Wireless Doorbell Waterproof Wall Plug-in Cordless

product Layout

package Contents

1x TeckNet Door Bell WA658
1x Double-Side Adhesive Tape
2 x Screws
2x Screw-joint Coupling
1x Battery
1x User Manual
1x Warranty Card

product Features

Stylish, sleek exterior design.
Powerful transmitter provides an amazing 150-250 metres (in the open air) range for remote control.
You can easily select and change chimes to suit your taste or occasion.
Four-Hevel adjustable volume control for each receiver.

product Specification

Receiver Power Supplied:
Receiver Working Curent
Transmitter Battery Type:
Battery Lifetime:
Transmitter Working Voltage:
Sound Volume:
Working Frequency

Receiver Instructions

Simply put the receiver into the socket, there wil be a warning tone “Ding- Dong” showing the recelver is on.
To Change the Chime
This can be done before or after pairing

Plug in the receiver, there would be a chime prompt.
Simply press Music+ or Music -to play through the different chimes included in the receiver.
Once you have found the chime you like simply let it play,
if your transmitter is paired, the next time it is pressed it will play your selected chime.
If it doesn’t however, please follow the instructions for deleting the pair choose your chime again and then re-pair as instructed above.

Volume Adjustment
Cycling through the button to adjust 4 volume levels.

To pair the device

Plug in the receiver.
Press the Music+ (the top button) and the volume buttons (central circle) together, the LED will light up.
Then release the buttons simultaneously.
While the LED is on, press the transmitter button once, the LED on the receiver will flash once.
Afterwards, press the volume button (central circle) again to finish pairing.

Delete pairing method

Unplug the receiver
Press and hold the volume button (central circle) and plug the receiver in. DO NOT release the buttons for 5-10 seconds, meanwhile, the LED will start lashing
Then release the button after the LED tums off.
The previous paring mode is removed and confirmed when you hear a ring tone.

Receiver and Transmitter installation
Apply the double-sided adhesive tape on the back of the receiver/transmitter case. Remove the outer side of the tape, attach the receiver/transmitter to the position you need, and press hard for 32 seconds

Maintenance

Ideally, use high-quality alkaline batteries which will last longer and reduce the chance of electrolyte leakage.
In order to protect the precision of internal electronic components, it’s advisable that unqualified users should not attempt to open the unit for maintenance.
Do not exposure to continuous direct sunlight or a humid environment- this will adversely affect the unit.
Correct use of the products helps to effectively extend the service life of the unit.

IMPORTANT SAFETY INSTRUCTION-CAREFULLY FOLLOW THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS -This sheet contains important safety and operating instructions.
Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Keep the product away from fire or explosion may occur.
For proper insertion, please observe polarity indicators (+-)
Remove the batteries if the product is not going to be used for a long period of time.
Do not place the product in or near an inflammable, explosive, or hazardous object.
The doorbell is waterproof to some extent, it still needs some protection so that it will be durable. So please do not place in or near water, rain, excess moisture, or extreme heat.
Do not operate the product with a damaged cords or plugs.
Do not operate the product if it has been damaged in any way
Do not disassemble the product. Disassembly may result in a risk of safety hazards.
Do not throw or shake the product.
To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.

Limited 18-Month Warranty

What this warranty cover.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unchain”) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unchain warrants the TeckNet product for 18 Months.
What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TeckNet product is not provided to Unchain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unchain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit the TeckNet website at www.tecknet.co.uk for more information.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.