Three Champions Enterprise 3CBTHP01 E/D HP BT Wireless Headphones Instructions

Three Champions Enterprise 3CBTHP01 E/D HP BT Wireless Headphones

Wireless Headphones Specifications

• Wireless headphones
• Built-in microphone
• Bluetooth compatible

1. Product

   • Microphone Parameters
     Microphone Unit : 4mm dia*1.5mm
     S.P.L. : -42+/-3db
     Impedance : <= 32K Ohm
     Frequency Response : 20Hz – 20KHz
     Operating voltage : 2.20V – 4.2V

   • Speaker Parameters
     Speaker diameter : 40mm dia
     Impedance : 32 Ohm
     S.P.L. : 85dB+/-3dB/6MW/1cm at 1 KHz
     Rated power : Nominal 3MW, max 5MW
     Frequency Response : 200Hz+/-20% at 0.3V

   • Other
     Li-battery Capability : 300mAh
     Talking time : 6 hours
     Playing time : 6 hours
     Stand by time : 100 hours
     Charge time : 2 hours
     Charge mode micro USB 5V/0.5A

2. Brief description of the headphones
   Wireless version V5.0
   Transmission Range (Hz) 2.402GHz–2.480GHz
   Receiving sensitivity
   Direct distance 10m
   Pair name 3CBTHP01

Warnings:
Contains small parts which may be a choking hazard. Not suitable for children under age three.
Set a low volume setting before using the headphones. Long-term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these headphones, especially for extended periods. Use caution when using your headphones while operating a Vehicle or engaging in any activity that requires your full attention. Check and follow local laws regarding headphone use. Avoid listening to music at maximum volume for prolonged periods.

Wireless Earbuds (Charging Cable Included)
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Three Champions is under license. Other trademarks and trade names are those of their respective owners.

How to Use

1. Power on and pair Bluetooth headphones:
   Make sure headphones and phone or other Bluetooth device are next to each other. Press power on and find “3CBTHP01” in the list of Bluetooth devices on your phone or other Bluetooth devices to pair.
   Flashing red and blue light when paring, non-flashing blue light when pairing successfully.

   • Headphone
     

   • Bluetooth Settings
     

   • Pairing
     

   • Pairing Successfully
     

2. Power off:
   Press power off.
   

3. Charge the Headphones:
   Plug in the charging cable and a red light will turn on when charging. Battery will be fully charged when the red light turns off.
   

4. Play/Pause Music:
   Press button to listen to music. When music is playing a blue light will flash. When music is paused blue light will not flash.
   

5. To Play the Previous Song:
   Press button to play previous song.
   

6. To Play the Next Song:
   Press button to play the next song.
   

7. Reduce Volume:
   Press and hold button to reduce volume.
   

8. Increase Volume:
   Press and hold button to increase volume.
   

9. Pick up Call:
   Press button to answer or hang up call.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>