Three Champions Enterprise 3CBT011 AL-D BT EB Mint Wireless Earbuds User Guide

Three Champions Enterprise 3CBT011 AL-D BT EB Mint Wireless Earbuds

Wireless earbuds specifications

•  wireless ear buds
• built-in microphone
• bluetooth compatible
• 1-click skip
• wireless design with magnetic charging case
• product

Microhpone parameters

• Microhpone Unit : 4mm dia*1.5mm
• S.P.L. : -42+/-3db
• Impedance : <= 32K Ohm
• Frequency Response : 20Hz–20KHz
• Operating voltage : 2.20V-4.2V

Speaker parameters

• Speaker diameter : 10mm dia
• Impedance : 32 Ohm
• S.P.L. : 85dB+/-3dB/6MW/1cm at 1 KHz
• Rated power : Nominal 3MW, max 5MW
• Frequency Response : 200Hz+/-20% at 0.3V

Other

• Li-battery Capability : 30mAh and 300mAh
• Talking time : 1 hours 50 minute
• Playing time : 1 hours 50 minute
• Stand by time : 30 hours
• Earbuds charge time : 45 minute
• Battery case charge time : 2 hours
• Charge mode micro USB 5V/1A

Brief description of the earbuds

• Wireless version V5.0
• Transmission Range (Hz) 2.402GHz–2.480GHz
• Receiving sensitivity
• Direct distance 10m
• Pair name 3CBT-01

Warnings :

Contains small parts which may be a choking hazard. Not suitable for children under age three. Set a low volume setting before using the headphones. Long- term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these headphones, especially for extended periods. Use caution when using your headphones while operating a Vehicle or engaging in any activity that requires your full attention.

Check and follow local laws regarding headphone use. Avoid listening to music at maximum volume for prolonged periods. wireless earbuds (charging cable included)
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Three Champions is under license. Other trademarks and trade names are those of their respective owners.

How to use

1. Power on and pair bluetooth earbuds :
   Make sure earbuds and phone or other bluetooth device are next to each other. Take earbuds out of case to power on and start pairing. Find “3CBT-01” in the list of Bluetooth devices on your phone or other Bluetooth devices to pair.

2. Power off and charge earbuds :
   Make sure battery case is fully charged. Put earbuds into battery case to start charging. It takes approx. 2 hours to fully recharge the battery case and 45 minutes to the earbuds.

3. Charge the battery case :
   Plug in the charging cable and a red light will flash when charging. Case will be fully charged when the red light stops flashing.

4. Pause music : Press button on right or left earbud when listening to music.

5. Pick up call :
   Press button on right or left earbuds

Charge earbuds :

Make sure case is fully charged. While the earbuds are in the case, press the button of charging case.

Re- call :

Press button on right or left earbud 2 times.

To play the next song :

Press button to play the next song on right or left earbud for 2 seconds.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>