Qolsys IQ Panel 4 Zions Security Alarm User Manual
- June 6, 2024
- Qolsys
Table of Contents
Qolsys IQ Panel 4 Zions Security Alarm User Manual
General Applications
The Qolsys IQ Panel 4 features the Quectel Wireless module Model SC650T-NA with FCC ID: XMR2019SC650TNA providing cellular connections (E-UTRA-FDD) Bands 2, 4, 5, 7, 12, 13, 14, 25, 26 and 66. The Quectel module incorporates also provides WiFI 2.4 / 5 GHz and Bluetooth Low Energy 4.2 support. A main antenna and Diversity antenna are embedded on the Qolsys MB to support these features. Additionally the Qolsys IQ Panel 4 includes the EFR32ZG14 modem for air connection to compatible Z-wave Devices at the 908.4 MHz and 916 MHz and includes an embedded Antenna. These antennas are not removable and are not designed to be modified.
Installation and Operation
The module has three simple 8 pin receptacle interface for connections to other modules such as PowerG, Zigbee and other Security Radios. These additional modules are optional and will provide their own Antennas and FCC Licenses.
The built in Z-Wave operates at 908.4, 916, 919.8 and 921.4 MHz with an output power up to +4dBm. Data and protocol specifications are beyond the scope of this document. Please contact Qolsys for the technical specifications.
FCC Compliance (Declaration of Conformity)
FCCID: 2AAJXQS-IQP4
Tradename: Qolsys
Model Number: IQPanel 4
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body.
Industry Canada Statement of Compliance:
IC: 11205A-QSIQP4
- his device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
- This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.’
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.
- The County Code Selection feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 27 cm between the radiator & your body.
Warranty Information
IMPORTANT! Changes or modifications not expressly approved by Qolsys Inc. will void the user’s authority to operate the equipment, as well as warranty for the product.
SUPPORT – QOLSYS
1-855-476-5797
Qolsys Inc. 1900 The Alameda San Jose, CA 95126 USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>