MAGEASY MEPSQ2 Power Station 5 in 1 Qi2 Space Saving Charging Stand User Manual
- September 6, 2024
- MAGEASY
Table of Contents
MAGEASY MEPSQ2 Power Station 5 in 1 Qi2 Space Saving Charging Stand User
Manual
PRODUCT DESCRIPTION
Power Station 5 in 1 Qi2 is a space-saving charging stand for iPhone, Apple Watch, AirPods and USB-C devices. Enjoy the convenience of wireless charging where all 3 devices can be charged at the same time. Built-in ambiance backlight with 3- intensity settings. It is a must-have accessory for Apple users!
Power Station 5 in 1 Qi2
- Standby: Green LED light
- Charging： Green LED light breathing light
- Full Charge Green LED light
PRODUCT SPECIFICATIONS
Power Station 5 in 1 Qi2
- Name: 9V⎓ 3A/12V⎓3A/15V⎓3A/20V⎓3.25A
- Input : 5W/7.5W/10W/15W
- Phone Output : 3W
- Watch Output : 5W
- Pad Output : Match Qi 2
- Product Standard : ≦6mm
- Connector : 105-205KHz
- Frequency : Power Station Qi2
SAFETY AND CERTIFICATION
USER GUIDE
- Please use a charger certified by PD, QC 2.0, QC 3.0.
- Before plugging the charger into the socket, ensure that the charging cable is fully inserted into the charger.
- Do not use this product in high temperature or humid environments and keep it away from fire and water.
- When folding the Power Station 5 in 1 Qi2, do not place any metal objects on it (such as keys, coins, batteries, memory cards, cards with chips, or jewelry), as this may cause charging abnormalities or overheating, and can also damage the PowerStation 5 in 1 Qi2.
- Do not disassemble this product arbitrarily.
- When there is an abnormality, the charging stand will shut off automatically for protection.
GENERAL PRECAUTIONS
- Please do not place any objects, such as coins, on top of the charger while charging.
- Please charge with a wireless charging compatible phone case or remove the phone case while charging.
- A phone case that is more than 3 mm in thickness may affect charging efficiency.
- When using the Power Station 5 in 1 Qi2, please do not place too much weight over it or drop the device.
- Please do not attempt to repair the PowerStation 5 in 1 Qi2 wireless charger on your own by taking it apart.
- Please do not twist or squeeze the USB-C cable.
- If you need to change the USB cable, please make sure that the product meets the manufacturer’s specifications.
- Please do not operate the charger when your hands are wet to prevent electric shocks or fire hazards.
- Please do not place the Power Station 5 in 1 Qi2 wireless charger in a humid area.
- A power supply unit is not included with this product, we recommend that you use a 55W power supply.
- Please be advised that the upgrade of the Apple iOS or Watch IOS may potentially result in charging difficulties.
NOTICE
Equipment name: Power Station 5 in 1 Qi2
Power Station Qi2
| Type designation(Type)
MEPSQ2
---|---
Unit
| Restricted substances and its chemical symbols
Lead(Pb)| Mercury(Hg)| Cadmium(Cd)| Hexavalent chromium (Cr+6)| polybrominated
biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
Type-C| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
Note 1：”Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
Note 2：“◯” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>