Qolsys QS-ZWAVEAH Zwave Module Instruction Manual
- June 5, 2024
- Qolsys
Table of Contents
Detailed Module Integration Details
FCC ID: 2AKIXQS-ZWAVEAH
Regulatory Module Integration Instructions
This module has been granted modular approval for mobile applications. OEM
integrators for host products may use the module in their final products
without additional FCC certification if they meet the following conditions.
Otherwise, additional FCC approvals must be obtained.
The host product with the module installed must be evaluated for simultaneous
transmission requirements.
- The user’s manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.
- To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed 2dBi
- A label must be affixed to the outside of the host product with the following statements:
This device contains FCC ID: 2AAJXQS-ZWAVEAH
The final host/module combination may also need to be evaluated against the
FCC Part 158 criteria for unintentional radiators in order to be properly
authorized for operation as a Part 15 digital device.
If the final host/module combination is intended for use as a portable device
(see classifications below) the host manufacturer is responsible for separate
approvals for the SAR requirements from FCC Part 2.1093 and RSS-102.
Device Classifications
Since host devices vary widely with design features and configurations module
integrators shall follow the guidelines below regarding device classification
and simultaneous transmission and seek guidance from their preferred
regulatory test lab to determine how regulatory guidelines will impact the
device compliance. Proactive management of the regulatory process will
minimize unexpected schedule delays and costs due to unplanned testing
activities.
the module integrator must determine the minimum distance required between the
host device and the user’s body. The FCC provides device classification
definitions to assist in making the correct determination. Note that these
classifications are guidelines only; strict adherence to a device
classification may not satisfy the regulatory requirement as near-body device
design details may vary widely. Your preferred test lab will be able to assist
in determining the appropriate device category for your host product and if a
KDB or PBA must be submitted to the FCC.
Note, that the module you are using has been granted modular approval for
mobile applications. Portable applications may require further RF exposure
(SAR) evaluations. It is also likely that the host/module combination will
need to undergo testing for FCC Part 15 regardless of the device
classification. Your preferred test lab will be able to assist in determining
the exact tests which are required on the host/module combination.
FCC Definitions
Portable: (92.1093) — A portable device is defined as a transmitting device
designed to be used so that the radiating structure(s) of the device is/are
within 20 centimeters of the body of the user.
Mobile: (92.1091) (b) — A mobile device is defined as a transmitting device
designed to be used in other than fixed locations and to generally be used in
such a way that a separation distance of at least 20 centimeters is normally
maintained between the transmitter’s radiating structure(s) and the body of
the user or nearby persons. Per §2.1091d(d)(4) In some cases (for example,
modular or desktop transmitters), the potential conditions of use of a device
may not allow easy classification of that device as either Mobile or Portable.
In these cases, applicants are responsible for determining minimum distances
for compliance for the intended use and installation of the device based on
evaluation of either specific absorption rate (SAR), field strength, or power
density, whichever is most appropriate.
Simultaneous Transmission Evaluation
This module has not been evaluated or approved for simultaneous transmission
as it is impossible to determine the exact multi-transmission scenario that a
host manufacturer may choose. Any simultaneous transmission condition
established through module integration into a host product must be evaluated
per the requirements in KDB447498D01(8) and KDB616217D01,003 (for laptop,
notebook, netbook, and tablet applications).
These requirements include, but are not limited to:
-
Transmitters and modules certified for mobile or portable exposure conditions can be incorporated into mobile host devices without further testing or certification when:
Or -
The closest separation among all simultaneous transmitting antennas is >20 cm,
-
Antenna separation distance and MPE compliance requirements for ALL simultaneous transmitting antennas have been specified in the application filing of at least one of the certified transmitters within the host device. In addition, when transmitters certified for portable use are incorporated into a mobile host device, the antenna(s) must be >5 cm from all other simultaneous transmitting antennas.
-
All antennas in the final product must be at least 20 cm from users and nearby persons.
OEM Instruction Manual Content
Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction guide for the final commercial product.
Operating Requirements and Conditions:
The design of the ZWave Module complies with U.S. Federal Communications
Commission (FCC) guidelines respecting safety levels of radio frequency (RF)
exposure for Mobile devices.
FCC ID:
This product contains FCC ID: 2AA.IXQS-ZWAVEAH
Note: In the case where the Host / Module combination has been re-certified
the FCCID shall appear in the product manual as follows:
FCCI D: 2AAJXQS-IvVAVEAH
Mobile Device RF Exposure Statement:
RF Exposure — This module operates under Part 15, Subpart C (15.249), and
Subpart B, Class B, which is exempt from RF exposure evaluation owing to the
very low operating power.
Caution Statement for Modifications:
CAUTION: Any changes or modifications not expressly approved by Qolsys
Inc. could void the user’s authority to operate the equipment.
FCC Part 15 Statement (Only Include if FCC Part 15 is Required on the End
Product):
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Relocate the device
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>