YouPro YP-860 II Camera Wireless Remote Control Instruction Manual
- June 6, 2024
- YouPro
Table of Contents
**YouPro**
Camera Wireless Remote Control
Instruction Manual
YP-860 II
Overview:
Thanks so much for purchasing Your product, YP-86011 is high performance wireless remote control. Please read carefully and understand the way of using the camera, before using Youpro wireless remote control, in order to know better the way of using our product.
Caution before use:
Make sure the camera is powered off before installing the device of the YP-
860RX II, when the product connects the device, please not pull the cable.
It is an electronic product accessory, some of the environmental conditions
may affect the working, however, it is much less probability of this
condition, please don’t worry.
This component can’t be strong vibration or may lead to product failure.
Please turn off the battery if such a long time won’t use this product.
Please not put our product in high tempura areas, such as a closed car under
direct sunlight, the control panel, and the other high-temperature area.
Please keep dry, do not use wet hand contact with the product, the product
must not be immersed in water or exposed to rain, and this may lead to not
working properly.
Please not use flammable gases in violation of this warning that may cause an
explosion or fire.
Because of this product is included a battery, please strictly follow the
instruction for the operation. Otherwise, it may cause an explosion, fire or
personal
Function Introduction:
- Adopt free global FSK2.4 signal, more stable, the operating distance can reach more than 100m
- Using wireless technology, it can remote the camera which connects the suitable connect cable. • We designed low power consumption.
- Support chance different cables to work with a different camera.
- Support single shooting, 1 continuous shooting, Bulb shooting, delay shooting.
Included Items:
Please the below items in the package, please contact the dealer if there is
missed some items.
- Transmitter (YP-860TX) — 1pc
- Receiver(YP-860RX II)– 1pc
- Connect cable — 1pc
- Manual — 1pc
The camera connects cable introduction:
Transmitter
- Indicator light
- Shutter button
- Single/continues/BULB/delay shooting range button Channel switch
- AAA battery 43 Battery cover
- Product sticker
Receiver
- Power button
- Indicator light
- 2.5mm signal import connect port Shutter release button
- Battery chamber 13 Channel switch
- Hot-shoe
- Battery cover
Install and use
The way of Installing the battery of the transmitter
- Open the battery cover
- Install the battery in the right way + and —
- Close the battery cover
The way of installing the battery of the receiver
- Open the battery cover
- Install the battery in the right way + and —
- Close the battery cover
Fixed the receiver
1. Put the receiver on the camera hot shoe
2. Fixed the receiver in the camera accessory 3. Fixed the receiver in tripod
- Put the receiver screw-in tripod quick release plate
- Put the quick release plate on the tripod
Caution: ensure the crew lock or the receive loose.
Usee The Product
♦ Channel switch
Keep the transmitter and receiver in the same channel, so the receiver can
receive the signal. ♦ Tum on the power of receiver(VP-860RX II)
Press 2 seconds of power, the read lamb will flash, the receiver in working
♦ The function of transmitter setting
Single shooting: Set the camera in single shooting mode, set the
transmitter in single shooting mode via range button, half-press the button
(the receiver and transmitter will flashing) Full press the shutter button,
the red lamb flashing mean all in working
Continuous shooting : Set the camera in the mode of continuous
mode: the range of button in continues mode: half-press the activate the auto-
zoom; Full press the shutter button and not release, the camera will in
continues mode.
BULB Bulb shooting: Set the range of the shutter button in Bulb mode.
Half-press the shutter button in zoom mode. Full press the shutter release and
tight, the red lamb will flash one time, according to the flashing time to
confirmed the shutter release work time, press the shutter button means the
bulb mode closed.
Delay shooting : Set the range of shutter button in delay shooting mode,
half-press the shutter button active the auto-zoom mode. Full press the
shutter button, 4-second shooting mode in working, will shoot after 4 seconds.
Icon Function
FSK 2.4 GHz|
---|---
Single Shooting|
Bulb Shooting|
Delay Shooting|
Operation Distance 100m+|
Continuous Shooting|
16 Channel|
Product Specification:
System mode:……………………………….FSK 2.4G
Operation Channel:………………..16th
Operation distance:………………………… 100m+
Battery:………………..AAA4
Shutter release:……………….. Half-press, full press
Shutter connect to port:………………………. 2.5mm connect port
The transmitter standby:…………………. 1000hours
The receiver standby:……………..400hours
The dimension of transmitter:………………………….33.5mm.99mm 15.3mm
The dimension of the receiver:………………………..70.5mm38mm 25mm
Above is the manual of YP-860 II , If you need any help, please contact our
dealer Or contact:http:llwww.hkyoupro.com
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital d evice, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and radiates radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help with an important announcement
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
You Technology Co., Ltd A
dd: No.229.Louling Valley.Huang Caolang District DaLang Town DongGuan City.
China Tel: 0769-8106 6263
Fax:0769-8106 6263
Email: Info@hkyoupro.com
Website:http://www.hkyoupro.com
Version: V1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>