HUDSON VALLEY KBS1350401 Ratio Floor Lamp User Manual
- June 13, 2024
- HUDSON VALLEY
Table of Contents
HUDSON VALLEY KBS1350401 Ratio Floor Lamp
Product Information:
- Product Name: Hudson Valley Lighting
- Product Brands: Troy Lighting, Mitzi, Corbett Lighting
- Model: KBS 5
Product Usage Instructions:
- Fixtures Installation:
- Ensure that the fixture is installed securely.
- Do not exceed the recommended wattage for the fixture.
- Dimmer Switch:
- Use a dimmer switch (C) to control the brightness of the light.
- Cord (D):
- Ensure that the cord is properly connected and not damaged.
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION AND
- MAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM.
- WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
FIXTURE INSTALLATION
- Screw the Lightbulb (A) into the Fixtures socket. This fixture is rated for 15 Watt BR-30. DO NOT EXCEED THE RECOMMENDED WATTAGE.
- Plug the CORD (D) into the wall outlet. Use the DIMMER SWITCH (C) on the CORD (D) to turn the fixture on/ off
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>