Whynter ARC Series MultiCool Smart Control Enabled Portable Air Conditioner Owner’s Manual

Whynter ARC Series MultiCool Smart Control Enabled Portable Air

Conditioner

Whynter MultiCool Smart Control Enabled Portable Air Conditioner

Specifications

• Model: ARC-0850XP, ARC-1050XP, ARC-1050XPH
• Operational Modes: Cooling Capacity, Heating Capacity, Auto, Cool, Fan, Dry
• Cooling Capacity: 12,000 BTU SACC for ARC-0850XP, 13,500 BTU SACC for ARC-1050XP and ARC-1050XPH
• Heating Capacity: 10,500 BTU for ARC-1050XPH
• Dehumidifying Capacity: 91 pints per day for ARC-0850XP, 122 pints per day for ARC-1050XP and ARC-1050XPH
• Coverage Area: 450 sq. ft.
• Fan Speed: Continuous, Auto, Low, Medium, High
• Noise Level: Not specified

Product Usage Instructions:

Safety Precautions:

To prevent injury or damage, follow these instructions:

• Installation must be done according to the provided instructions to avoid water leakage, electrical shock, or fire.
• Use only included accessories and specified tools for installation to prevent water leakage, electrical shock, fire, and injury.
• Ensure the outlet used is grounded with the appropriate voltage.

Safety Compliance:

Store the appliance in a room without continuously operating ignition sources. Do not pierce or burn the unit. Refrigerants may not have an odor.

FAQ:

• Q: What should I do before using the air conditioner?
  A: Before using the air conditioner, read the manual carefully for proper operation and keep it for future reference.

• Q: How should I dispose of the appliance?
  A: The appliance must be handed in at a collection point for recycling electric and electronic appliances. Contact your local municipal authority for more information on recycling.

Whynter MultiCool Smart Control Enabled Portable Air Conditioner with Built-in Dehumidifier and Heating Function
MODELS: ARC-0850XP | ARC-1050XP | ARC-1050XPH
Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference

IMPORTANT NOTE:
Before using your air conditioner, please read this manual carefully and keep it for future reference.

DISPOSAL INFORMATION

Thank you for choosing Whynter. Please follow the instructions provided in this user manual to obtain the very best performance from your portable air conditioner. We trust that your Whynter portable air conditioner will provide the performance and reliability that we stand for.
Please keep this user manual in a safe place for future reference.
This symbol on the product or its packaging indicates that this appliance cannot be treated as normal domestic trash, but must be handed in at a collection point for recycling electric and electronic appliances. Your contribution to the correct disposal of this product protects the environment.
Further information about the recycling of this product can be obtained from your local municipal authority.
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information

• Unique Identifie r: RG51F2(2)/EFU1
• Responsible Party – U.S. Contact Information
• Brand: Whynter Company Name: Whynter LLC.
• Address: 3320 E Birch Street, Brea CA 92821 Internet contact information: https://www.whynter.com

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SAFETY PRECAUTIONS

To prevent death or injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause death, harm or damage.

• Installation must be performed according to the installation instructions. Improper installation can cause water leakage, electrical shock, or fire.

• Use only the included accessories and parts, and specified tools for the installation. Using non-standard parts can cause water leakage, electrical shock, fire, and injury or property damage. Make sure that the outlet you are using is grounded and has the appropriate voltage.

• The power cord is equipped with a three-prong grounding plug to protect against shock.

• Voltage information can be found on the nameplate of the unit.

• Your unit must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is notadequately grounded or protected by a time delay fuse or circuit breaker (the fuse or circuit breaker needed is determined by the maximum current of the unit. The maximum current is indicated on the nameplate located on
  unit), have a qualified electrician install the proper receptacle.

• Install the unit on a flat, sturdy surface. Failure to do so could result in damage or excessive noise and vibration. The unit must be kept free from obstruction to ensure proper function and to mitigate safety hazards.

• Do not modify the length of the power cord or use an extension cord to power the unit.

• Do not share a single outlet with other electrical appliances. Improper power supply can cause fire or electrical shock.

• Do not install your air conditioner in a wet room such as a bathroom or laundry room. Too much exposure to watercan cause electrical components to short circuit.

• Ensure there is a minimum of 36″ clearance around the unit and is clear from any combustible items such as propane, fire extinguishers, fuel, etc.

• The exhaust hose should always be used and should never be covered or blocked which can become a fire hazard.

• The unit has wheels to facilitate moving. Make sure not to use the wheels on thick carpet or to roll over objects, as these could cause tipping.

• Do not operate a unit that it has been dropped or damaged.

• Do not place the portable air conditioner close to any other heat-generating appliances

• Do not touch the unit with wet or damp hands or when barefoot.

• If the air conditioner is knocked over during use, turn off the unit and unplug it from the main power supply immediately. Visually inspect the unit to ensure there is no damage. If you suspect the unit has been damaged, contact a technician or customer service for assistance.

• In a thunderstorm, the power must be cut off to avoid damage to the machine due to lightning.

• Your air conditioner should be used in such a way that it is protected from moisture. e.g. condensation, splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or any other liquid. Unplug immediately if it occurs.

• All wiring must be performed strictly in accordance with the wiring diagram located inside of the unit.

• The unit’s circuit board (PCB) is designed with a fuse to provide overcurrent protection. The specifications of the fuse are printed on the circuit board, such as: T 3.15A/250V, etc.

• When the water drainage function is not in use, keep the upper and the lower drain plug firmly plugged into to unit to prevent choking.

CAUTION

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Children must be supervised around the unit at all times.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
• Do not remove any fixed covers. Never use this appliance if it is not working properly, or if it has been dropped or damaged.Do not remove any fixed covers. Never use this appliance if it is not working properly, or if it has been dropped or damaged. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• Do not operate unit with a damaged cord, plug, power fuse or circuit breaker. Return to an authorized service facility for examination and/or repair.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
• The appliance shall be installed in accordance with national wiring regulations.
• Contact the manufacturer or authorized service technician for repair or maintenance information of this unit. Contact the manufacturer or authorized installer for installation questions of this unit.
• Do not cover or obstruct the inlet or outlet grilles.
• Do not use this product for functions other than those described in this instruction manual.
• Before cleaning, turn off the power and unplug the unit.
• Disconnect the power if strange sounds, smell, or smoke comes from it and contact the manufacturer or authorized service technician for assistance.
• Do not press the buttons on the control panel with anything other than your fingers.
• Do not remove any fixed covers. Contact Whynter Customer Support if this unit if it is not working properly, orif it has been dropped or damaged.
• Do not operate or stop the unit by inserting or pulling out the power cord plug.
• Do not use hazardous chemicals to clean or come into contact with the unit. Do not use the unit in the presence of inflammable substances or vapor such as alcohol, insecticides, petrol, etc. Always transport your air conditioner in a vertical position and stand on a stable, level surface during use.
• Always contact Whynter Customer Support for replacement parts compatible with your unit. Hold the plug by the head of the power plug when taking it out.
  Turn off the product when not in use.

WARNING

• The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating gas appliance or an operating electric heater).
• Do not pierce or burn the unit.
• Be aware that the refrigerants may not contain an odor.

SAFETY COMPLIANCE

• Keep ventilation openings clear of obstruction.
• The appliance shall be stored so as to prevent mechanical damage from occurring.
• A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
• Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry recognized assessment specification.
• Servicing shall only be performed as recommended by the equipment manufacturer.
• Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision
• of the person competent in the use of flammable refrigerants.
• Please follow the instructions carefully to handle, install, clear, and service the air conditioner to avoid any damage or
• hazard. Flammable Refrigerant R32 is used within air conditioner. When maintaining or disposing the air conditioner,
• the refrigerant (R32) shall be recovered properly and shall not discharge to air directly.
• No any open fire or device which may generate spark/arcing shall be around air conditioner to avoid causing ignition
• of the flammable refrigerant used.
• Please follow the instruction carefully to store or maintain the air conditioner to prevent mechanical damage from occurring. Flammable refrigerant R32 is used in air conditioner. Please follow the instruction carefully to avoid any hazard. For specific information on the type of gas and the amount, please to the relevant label on the unit itself.

SPECIFICATIONS

PREPARATION

All illustrations in the manual are for explanation purpose only. Your machine may be slightly different. The unit can be controlled by the unit control panel alone or with the remote controller.

DESIGN NOTICE
In order to ensure the optimal performance of our products, the design specifications of the unit and remote control are subject to change without prior notice.

CHOOSING THE RIGHT LOCATION

Your installation location should meet the following requirements:

• Make sure that you install your unit on an even surface to minimize noise and vibration.
• The unit must be installed near a grounded plug, and the Collection Tray Drain (found on the back of the unit) must be accessible.
• The unit should be located at least 30cm (12″) from the nearest wall to ensure proper air conditioning. The horizontal louver blade should be at least 50cm (19.7″) away from obstacles.
• DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the unit, as this could cause damage to the unit.

AMBIENT TEMPERATURE RANGE FOR OPERATION FOR OPTIMAL AIR CONDITIONER PERFORMANCE NOTE:
To ensure proper function, DO NOT overextend or bend the hose. Make sure that there is no obstacle around the air outlet of the exhaust hose (in the range of 19.7″) in order to the exhaust system works properly. All the illustrations in this manual are for explanation purpose only. Your air conditioner may be slightly different. The actual shape shall prevail.

INSTALLATION GUIDE

NOTE: Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of the following two window installation methods (Hung window or Sliding Window).

1. Exhaust hose assembly installation (window type)
   Press one end of the exhaust hose into the window slider adapter and the other end onto the unit adapter. The adapters will clamp automatically with elastic.

2. Preparing the adjustable window slider

   • Measure the window opening where the window kit will be installed.
   • Assemble Slider A to Slider B and Slider C for large windows. If the window opening is less than the length of Slider A alone, it can be cut to the necessary length. Make sure not to cut into the window slider adapter cutout or the adapter will not connect properly.
   • Use the window slider bolts to secure the window sliders at the correct length.

3. Complete sealing of window

   • Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash and frame as shown.

4. Hung window installation

   • Insert the window slider assembly into the window opening.
   • Cut the non-adhesive foam seal C strip to match the width of the window. Insert the seal between the glass and the window frame to prevent air and insects from getting into the room.
   • If desired, install the security bracket with 2 screws as shown.

5. Sliding window installation
   

   • Insert the window slider assembly into the window opening.
   • Cut the non-adhesive foam seal C strip to match the height of the window. Insert the seal between the glass and the window frame to prevent air and insects from getting into the room.
   • If desired, install the security bracket with 2 screws as shown.

6. Install the exhaust hose assembly to the unit

   • Slide the exhaust hose into the exhaust air outlet opening of the unit along the lower groove making sureto catch the hook into the hook seat.

7. Connect the exhaust hose assembly to the window

Insert the window slider adapter into the cutout of the window slider. NOTE: Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may be slightly different. The actual shape shall prevail.

CONTROL PANEL

1. POWER / WIRELESS button

   • Press the Power Button to turn on or off the unit.
   • To activate wireless connection mode, press and hold the POWER button for 3 seconds until ‘AP’ appears on the LED display. Successful router connection within 8 minutes exits wireless mode, illuminating the Wireless
   • indicator. Failure exits mode automatically.

2. MODE button

   • Select the operating mode in the sequence: AUTO, COOL, DRY, FAN and HEAT. The appropriate LED indicator light will light to show which mode is active. only for ARC-1050XPH
     AUTO mode

   • When you set the air conditioner to AUTO mode, it will automatically select cooling, heating, or fan-only operation depending on what temperature is selected and the room temperature. only for ARC-1050XPH

   • The air conditioner will control the room temperature automatically at the temperature point set by you. When in AUTO mode, you can not select the fan speed.

   • NOTE: When in AUTO mode, both the AUTO mode and the actual operation mode indicator lights illuminate for some models.
     COOL mode

   • When in COOL mode, Press the UP and DOWN buttons to select your desired room temperature. The temperature can be set within a range of 60°F-86°F/16°C-30°C

   • Press the FAN button to choose the fan speed.
     DRY mode

   • Press the MODE button until the DRY indicator light comes on. When in Dry mode, the fan speed and the temperature cannot be adjusted. The fan motor operates at AUTO speed.
     FAN mode

   • When in FAN mode, press the FAN button to choose the fan speed.

   • The temperature can not be adjusted. Do not put the duct to window.
     **HEAT mode***

   • Press the MODE button until the HEAT indicator light comes on.

   • Press the ADJUST buttons UP and DOWN to select your desired room temperature. The temperature can be set within a range of 60°F-86°F/16°C-30°C.

   • Press the FAN button to choose the fan speed. Note: For some models, the fan speed can not be adjusted under HEAT mode.

   • Only available for ARC-1050XPH

3. UP and DOWN buttons

   • Press to adjust (increasing/decreasing) temperature settings in 1°F/1°C increments
   • Press to adjust Timer setting in a range of 0-24hrs.
   • The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other, press and hold the Up and Down buttons at the same time for 3 seconds.

4. DISPLAY WINDOW

   • Shows the temperature in °C or °F and the Auto-timer settings.

5. TIMER button

   • Press to initiate the AUTO ON start time and AUTO OFF stop time program, in conjunction with the UP & DOWN buttons. The timer on/off indicator light illuminates when the timer is set.

6. SWING/VENT button

   • Press to initiate the swing feature. Press SWING button once to start the louver moving, and press again to stop the louver in the desired direction.

7. Continuous FAN mode

   • Control the fan speed. Press to select the fan speed in four steps: LOW, MED, HIGH and AUTO. The fan speed indicator light illuminates under different fan settings.
   • NOTE: When in COOL or DRY mode, press the button for 3 seconds until the continuous fan indicator light comes onto turn on the constant fan function. Press the button for 3 seconds to turn it off.

8. SLEEP mode

   • When in SLEEP mode the indicator light above the SLEEP button will illuminate, and the selected temperature will increase (cooling) or decrease (heating) by 1°C/2°F(or 1°F) for 30 minutes.The temperature will then increase (cooling) or decrease (heating) by another 1°C/2°F(or 1°F) after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the Sleep mode and the unit will continue to operate as originally programmed.

   • NOTE: This feature is unavailable under FAN or DRY mode.
     Reset Filter

   • Press and hold on the SLEEP button for 3 seconds to initiate the reset filter connection mode. This feature is a reminder to clean the Air Filter for more efficient operation. The filter light will illuminate after 250 hours of operation. To reset after cleaning the filter and replacing the carbon filter, press the SLEEP button and the light will go off.

9. SENSE FEATURE
   The remote control functions as a thermostat, ensuring precise temperature control. It integrates an efficient sensor and activates the I SENSE feature with a dedicated button. Once activated, it transmits temperature signals to the air conditioner every 3 minutes, canceling if inactive for 7 minutes.
   NOTE : Not applicable in DRY and FAN mode. Changing modes or turning off the unit disables the feature. Requires the remote within 26 feet of the indoor unit for optimal function.
   AUTO RESTART
   In the event of a power outage, the air conditioner restarts at the previously set function mode and settings when power is restored.
   NOISE LEVEL
   Portable air conditioners may make sounds that are not familiar to you. The sounds listed below are normal. Noise reflecting off hard surfaces such as a floor or wall can make the sounds seem louder than they actually are.

• The compressor may make a pulsating or high-pitched sound
• Water running from the evaporator to the water tank may make a splashing sound
• Refrigerant flowing may make a gurgling sound
• Fan sound may come from front and back air vents

COMPRESSOR LOCK OUT
This portable air conditioner is optimized to operate in an ambient temperature of 64°F-90°F. The compressor circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping.

REMOTE CONTROL

The portable air conditioner can be switched on by the remote control. To transmit signals from the remote control to the air conditioner, point the front part of the remote handset towards the control panel on the air conditioner. Reception of the signal is confirmed by a beep. The maximum signal transmission distance is approximately 8 meters/26 feet.
NOTE:

• Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause interferences
• Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control and the air conditioner
• Remove the batteries if the remote control is not used for long periods

1. Mode indicator
   Displays the current selected mode (Auto, Cool, Dry, Heat* or Fan)

2. Wireless indicator
   Displays when the remote is turned on, and disappears when it is turned off

3. Timer On indicator
   Displays when TIMER ON is set

4. Timer OFF indicator
   Displays when TIMER OFF is set

5. Swing indicator
   Displays auto-swing feature is turned, and disappears when it is turned off

6. Temperature/Timer display (h)
   Displays the set temperature or timer setting when using ON/OFF functions “h (hours)” indicator is shown when timer settings are activated

7. Remote Control indicator
   Displays when the remote is turned on and disappears when it is turned off

8. Temperature Scale indicator
   Displays temperature scale Fahrenheit or Celsius

9. Lock settings indicator
   Indicated all the current settings are locked

10. Sleep Feature indicator
    Displays when SLEEP function is activated

11. I Sense Feature indicator
    Displays when I SENSE function is activated

12. Fan Speed indicator
    Displays the current selected fan speed

13. Up button
    Increases set temperature/time

14. Down button
    Decreases set temperature/time

15. Mode button
    Controls the function modes: Auto, Cool, Dry, Fan, and Heat*

16. Power button
    Turns the unit On and Off

17. Fan Speed button
    Controls the fan speeds: Auto, High, Medium, or Low (Continuous mode cannot be set using the remote control)

18. Swing Feature button
    Press to stop or start louver auto-swing feature

19. Sleep Feature button
    Starts or stops louver movement and set louver angle

20. Timer ON button
    Enables the Timer On

21. I Sense Feature button
    Press to initiate I SENSE feature

22. Lock Setting button
    Press I SENSE and TIMER OFF buttons to lock current settings

23. Timer OFF button
    Enables the Timer Off Press this button to turn on and turn off

24. LED Display button
    Press this button to turn on and turn off the display on the indoor unit

25. Temperature Scale button
    Press to change Temperature Scale (Fahrenheit or Celsius)

REPLACING THE REMOTE BATTERIES
This remote control comes with two AAA batteries. Place the batteries in the remote control before use.

1. Slide the back cover from the remote downward to expose the battery compartment.
2. Insert the batteries, ensure to match the (+) and (-) symbols on the ends of the batteries with the symbols inside the battery compartment.
3. 3. Slide the battery cover back into place.

Notes :

• The air conditioner will not respond if curtains, doors, or other materials block the signal from the remote control to the unit.
• Prevent any liquid from contact with the remote control. Do not expose the remote control to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly. Use curtains to prevent the sunlight from falling on the receiver.
• Do not mix old and new batteries or batteries of different types.
• Do not leave the batteries in the remote control if it is not going to be used for more than two months.

CARE AND MAINTENANCE

SAFETY PRECAUTIONS

• Always unplug the unit before cleaning or servicing.
• DO NOT use flammable liquids or chemicals to clean the unit.
• DO NOT wash the unit under running water. Doing so causes electrical danger.
• DO NOT operate the portable air conditioner if the power supply was damaged during cleaning. A damaged power cord must be replaced with a new cord. Contact Whynter Customer Support for more information.

WATER DRAINAGE
When the internal drain pan becomes full the appliance will beep 8 times and the digital display will show error code P1. The air conditioning or dehumidifying action will stop but the fan may continue to operate. Ensure that the appliance is turned off and unplugged and that it is close to a floor drain or to an external container.

• A. Manual Drain Plug
  Remove the drain plug and allow the collected condensation to drain completely into a shallow external container. Replace the bottom manual drain plug, pressing firmly to ensure a tight fit and no leaks.

• B. Continuous Gravity Drain
  During dry mode, install continuous drain option so that the appliance will automatically drain collected water. Remove the upper drain plug and attach the included drain hose. Place the open end of the drain hose over the receptacle that the appliance will drain into; this could be a basement floor drain, a sink, or similar. Ensure that there are no kinks or bends in the drain hose and that it goes straight down toward the floor. The continuous drain is activated by gravity only. If the hose is not positioned directly downwards, water will not drain correctly.

• C. Heat pump drainage (for ARC-1050XPH only)
  This unit has a condensate pump feature that can pump out (and up) water through the included drain hose for continuous water removal during HEAT Mode. Remove the heat pump drain plug from the back of the unit and install the drain hose. Place the open end of the hose to a drain area.
  NOTE: The condensate pump will only engage during Heat mode and will not work in any other modes. Pump drain hose is required to be installed when using in Heat Mode. To reduce pump drain noise, make sure to attach the drain hose adapter to the open end of the drain hose.

CARE AND MAINTENANCE

UNIT CLEANING

• Unplug the appliance before cleaning or servicing. Clean the cabinet with a lukewarm damp cloth and neutral detergent. Dry the cabinet with a lint-free dry cloth.
• Do not use gasoline, paint thinner, or other chemicals to clean the appliance.
• Do not wash the appliance directly under a tap or using a hose. It may cause electrical damage.

AIR FILTERS
The two washable air filters should be cleaned every two weeks to ensure efficient performance. In households with animals, the air filters may need to be cleaned more often and the external grills may need to be wiped to prevent blocked air flow.
To access the filters:

1.  Switch off the air conditioner.
2.  Press down on the two tabs to release the upper air intake and lower air intake grilles.
3.  Use a vacuum cleaner or tap lightly to remove loose dust and dirt.
4. Rinse the filters thoroughly under warm running water (no hotter than 100°F.)
5.  Dry thoroughly before re-inserting the filters.

CARBON FILTER
The Activated Carbon filter is designed to remove smoke and other odors. It is recommended you replace the Activated Carbon filter every 2-3 months or as needed. DISPOSAL
This appliance should not be treated as regular household waste. Check for local regulatory compliance regarding the approved and safe disposal of this appliance.
ERROR CODES
P1 – water tray is full – attach drain hose and drain excess water If any of the error codes below appear on the display, unplug the air conditioner and allow it to sit undisturbed for 5 minutes. If the error code persists when the unit is plugged back in, please contact Whynter Customer Support.

• EH60 – Room temperature sensor error.
• EH61 – Evaporator temperature sensor error.
• EC52 – Condenser temperature sensor error
• EH0b – Display panel communication error.
• EL0C – Refrigerant leakage detection malfunction.

STORAGE

• Be sure to store the unit in a cool, dark place. Exposure to direct sunshine or extreme heat can shorten the lifespan of the unit.
• The cabinet and front may be dusted with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent. Rinse thoroughly and wipe dry.
• Never use harsh cleansers, wax or polish on the cabinet front.
• Be sure to wring excess water from the cloth before wiping around the controls. Excess water in or around the controls may cause damage to the unit.

1. Drain the unit’s water collection tray according to the instructions in thefollowing section.
2.  Run the appliance on FAN mode for 12 hours in a warm room to dry it and prevent mould.
3.  Turn off the appliance and unplug it.
4.  Clean the appliance by wiping its surfaces with a soft cloth dampened.
5. Clean the air filter according to the instructions in the previous section. Reinstall the clean, dry filter before storing.
6.  Remove the batteries from the remote control.

TROUBLESHOOTING

Many common portable air conditioner problems are easily resolved. Try the troubleshooting suggestions below to see if the problems can be resolved before having to contact the service department.
PROBLEM
The portable air conditioner does not turn on

POSSIBLE CAUSES

• Power failure/outage
• The automatic switch, line fuse, or breaker has been tripped
• The power supply voltage is too low
• The power cord is damaged The L.C.D.I. power plug for the unit is tripped
• The internal water reservoir is full and ‘P1″ appears on display
• The room temperature is outside of the operational tolerances of the unit
• The Cooling mode is not on The compressor has not turned on yet because of its time delay
• The set temperature is too high
• The internal water reservoir is full and ‘P1″ appears on display
• The filters are dirty or obstructed
• The air intake or exhaust is obstructed
• The unit is set in DRY or FAN mode
• The unit is set to low fan speed
• Windows or doors are open There are too many people in the room
• There is direct sunshine into the room
• The room is a kitchen or with many heat producing appliances
• There is a server in the room The room is too large

SOLUTIONS

• Restore the power supply
• Flip the switch / change the fuse/ turn the breaker back on. Also note that you may have too many applications drawing power on one circuit, you may need to move the other appliances to another circuit
• Move the unit onto another circuit with the correct voltage
• Call for service. Only authorized personnel should replace damaged power cord or power plug
• Press the Reset button on the L.C.D.I. power plug
• Drain water from the air conditioner
• Possible loose internal connection. Please contact Whynter for service.
• Restore the power supply
• Flip the switch / change the fuse/ turn the breaker back on. Also note that you may have too many applications drawing power on one circuit, you may need to move the other appliances to another circuit
• Move the unit onto another circuit with the correct voltage
• Call for service. Only authorized personnel should replace damaged power cord or power plug
• Press the Reset button on the L.C.D.I. power plug
• Drain water from the air conditioner
• Possible loose internal connection. Please contact Whynter for service.
• Clean the air filters
• Make sure there is at least 20″ of clearance from the air intake. Make the length of the exhaust hose is as short as possible
• Set the unit to the cooling mode
• Set the unit to a higher fan speed
• Close all windows and doors
• You may need additional cooling or another air conditioner.
• Close curtains or blinds and try to minimize the amount of direct sunlight into the room. You may need additional cooling or another air conditioner.

ONE YEAR LIMITED PARTS WARRANTY THREE YEAR WARRANTY ON COMPRESSOR

This WHYNTER product is warranted to the original owner, purchased from an authorized Whynter dealer within the 48 U.S. continental states, for one year from the original purchase date against defects in material and workmanship under normal residential usage. Should your WHYNTER product prove defective within one year from the date of purchase, contact Whynter’s Customer Support team with the serial number and proof of purchase to make a warranty claim. A Return Authorization number must be issued before returning any parts or products. Parts or products received without a Whynter issued Return Authorization number will be refused. Under this warranty, Whynter will repair or replace any parts found defective with new or remanufactured parts or exchange the defective product with a new, refurbished, or remanufactured product at our discretion. All defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to Whynter’s Service Center. This warranty is not transferable. After the expiration of the warranty, the cost of labor and parts will be the responsibility of the original owner. The compressor of portable air conditioner is warranty of an additional two years after the one year limited warranty expires from the date of purchase. After two months to one year, the customer will be responsible for the return freight cost to Whynter’s Service Center. Please package the product carefully in its original packaging to avoid damage in transit. Whynter is not responsible for damage resulting from shipper mishandling or improper packaging. Please retain the original box and packaging materials.

THIS WARRANTY DOES NOT COVER:

• Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes.
•  Improper power supply such as power surge, low voltage, defective household wiring or inadequate fuses.
• Use in commercial or industrial applications.
• Damage, accidental or otherwise, to the product while in the possession of a consumer not caused by a defect in material or workmanship.
• Damage caused by consumer misuse, tampering, lack of maintenance or failure to follow the care and special handling provisions in the instructions.
• Damage to the finish of the case, or other appearance parts caused by wear.
• Damage caused by repairs or alterations to the product by anyone other than authorized by the manufacturer.
• Removal, Replacement Packaging, Freight and Insurance cost for the warranty service.
• Products sold AS IS or from an unauthorized reseller.
•  Products that have had their serial numbers removed or defaced.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
To obtain service or information, contact
Whynter LLC via email at support@whynter.com or call 866-WHYNTER.
Product contents and specifications may change without notice.
Copyright © 2024
WWW.WHYNTER.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>