ClearClick VR40 AM/FM Retro Radio with BT User Manual

ClearClick VR40 AM/FM Retro Radio with BT User Manual

Model #VR40

5-Year Warranty

& Free USA-Based Tech Support

This product comes with a 5-year warranty & free USA tech support from ClearClick®. As a small business, we’re here to serve you! If you have any issues with our product, please contact us at support@clearclick.tech.

Register Your Product & Browse Our Products

Thank you for your purchase! Make sure you register your product & check out our other unique & easy-to-use technology at: www.ClearClick.tech

Safety Precautions

1.  Do not disassemble the unit.
2. Do not operate the unit around water or rain. Do not operate the unit around any kind of machines or appliances (other than computers).
3. Turn off and unplug the unit when not in use.
4. Do not allow young children to use this device.

Thank You!

Thank you for your purchase of the ClearClick® AM/FM Retro Radio! (Model Number VR40) We appreciate your business.

At ClearClick®, we try to make our technology as clear to understand and use as possible. But if you get stuck at any point, you qualify for FREE USA-based tech support as a ClearClick® customer. Just email us at: support@clearclick.tech

(Make sure you explain your issue in detail and tell us that you’re using our ClearClick® AM/FM Retro Radio). Our USA-based tech support team members will normally reply to you within 24-48 business hours.)

Listening To AM/FM Radio

1. Plug the power adapter into the back of the radio. Plug the other end into any electrical outlet.
2. Switch the left knob to either “AM” or “FM.”
3. Turn on the radio by turning the VOLUME (ON/OFF) knob clockwise.
4. Use the tuning knob to select your desired radio station.
5. Use the volume control knob to adjust the volume.
   NOTE: To improve the reception of your radio, adjust the pigtail antenna in the back of the radio.

Playing Music via Bluetooth

1. Plug the power adapter into the back of the radio. Plug the other end into any electrical outlet. Turn on the radio with the Volume/On/Off knob.
2. Switch the left knob to “BT.” (Bluetooth mode) The Bluetooth indicator LED will light up blue.
3.  On your phone, tablet, or other Bluetooth device, turn on Bluetooth and scan for devices. Connect to the “Vintage Radio” device.
4. Use the volume control knob to adjust the volume. (Note: You may also need to adjust the volume on your phone or tablet.)

Radio Diagram

1. Bluetooth indicator LED
2.  Function switch knob
3.  Tuning knob
4.  Power ON/OFF and volume control knob
5.  Speaker

FCC Warnings

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Need Help With Anything?

We Are Here To Help! Email Us At: support@clearclick.tech

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>