Zigbee SA-003 Smart Plug User Manual

Zigbee SA-003 Smart Plug

Specifications

Product Introduction

• Pairing button
• Manual switch
• ZigBee LED indicator(Green)
• On/Off LED indicator(red)

Distinguishing Feature

• Without other Zigbee hubs, directly support Amazon Echo Smart Speaker to config the Controller. After paired, you can use the Alexa APP or Voice to control the devices.
•  Support access to Samsung SmartThings hub, Amazon Echo Plus, Amazon Echo Show(2nd), Wink hub, or other Zigbee HA hub.
•  Zigbee Plug can be controlled by the button on itself.

Configuration Steps

Works with Amazon Alexa

• Confirm that the Green LED of the Zigbee Plug is flashing. If the indicator is always on, press and hold the button until it is flashing or power off the Zigbee Plug and then power on for 3-Bs. Repeat five times, then the Plug enters config mode, the Green LED will flash.
• Ask, “Alexa, discover my devices.”
• Wait for the Zigbee Plug Green LED indicator to be always on, and the Plug is connected to echo plus or echo show(2nd).
• Ask, “Alexa, turn on the first plug.” This will turn the Plug on.
• You can use Amazon Alexa App to add groups, routines or modify device names such as bedroom plugs, At this point, you can use the Alexa App or Voice to control the devices.

Works with Samsung SmartThings hub & Amazon Alexa

• Confirm that the Green LED of the Zigbee Plug is flashing. If the indicator is always on, press and hold the button until it is flashing or power off the Zigbee Plug and then power on for 3-Ss. Repeat five times, then the Plug enters config mode, the Green LED will flash.
• Open the SmartThings App and add the Zigbee Plug. When the Green LED indicator is always on, the Plug has been added to the SmartThings hub. If the App does not recognize the device type, please refer to the SmartTings Config.pdf document.
• Enable SmartThings Skill in the Amazon Alexa App or alexa.amazon.com
• Ask, “Alexa, discover my devices.” can add Zigbee Plug to Amazon Smart Home.
• You can use SmartThingsApp or Amazon Alexa App to add groups, routines or modify device names such as bedroom plugs, At this point, you can use the Alexa App or Voice to control the devices.

SmartThings APP and Alexa APP Operation (Add device, group, routines)

Alexa APP

SmartThings APP

1.  In the SmartThings APP interface click the’ +’ icon, You can add and modify devices.
2. In the SmartThingsAPP Smart Home interface, you can add your fav favorite devices and Routines.
3. In these S imntaerrftTahcein, gysoAu PP can operate the devices and trigger settings.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator &your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1 S of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• -Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio technician for help.

eWeLink has integrated with mainstream Al platforms. To ensure users can know quickly which platforms/smart speakers are compatible with products, manufacturers can print the poster version with the #Works with Al” link logo and attach it to the package with the user manual.

Smart products supporting ewe Link APP need to get the certification of the corresponding platform before using the logo of Al voice platforms. Please refer to the product certification to make a deletion if manufacturers use the version on the package.

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>